线程池的状态及KeepAliveTime参数

五个状态

    // runState is stored in the high-order bits
    private static final int RUNNING    = -1 << COUNT_BITS;
    private static final int SHUTDOWN   =  0 << COUNT_BITS;
    private static final int STOP       =  1 << COUNT_BITS;
    private static final int TIDYING    =  2 << COUNT_BITS;
    private static final int TERMINATED =  3 << COUNT_BITS;

循环getTask方法

/**
     * Performs blocking or timed wait for a task, depending on
     * current configuration settings, or returns null if this worker
     * must exit because of any of:
     * 1. There are more than maximumPoolSize workers (due to
     *    a call to setMaximumPoolSize).
     * 2. The pool is stopped.
     * 3. The pool is shutdown and the queue is empty.
     * 4. This worker timed out waiting for a task, and timed-out
     *    workers are subject to termination (that is,
     *    {@code allowCoreThreadTimeOut || workerCount > corePoolSize})
     *    both before and after the timed wait.
     *
     * @return task, or null if the worker must exit, in which case
     *         workerCount is decremented
     */
    private Runnable getTask() {
        boolean timedOut = false; // Did the last poll() time out?
        retry:
        for (;;) {
            int c = ctl.get();
            int rs = runStateOf(c);
            // Check if queue empty only if necessary.
            if (rs >= SHUTDOWN && (rs >= STOP || workQueue.isEmpty())) {
                decrementWorkerCount();
                return null;
            }
            boolean timed;      // Are workers subject to culling?
            for (;;) {
                int wc = workerCountOf(c);
                timed = allowCoreThreadTimeOut || wc > corePoolSize;
                //默认allowCoreThreadTimeOut为false，除非程序指定
                //（1）当没有超过核心线程时，默认allowCoreThreadTimeOut为false时
                //timed值为false，始终break掉，不会销毁线程
                //（2）当超过核心线程数，默认allowCoreThreadTimeOut为false时
                //timed值为true，如果超过最大值，则销毁；如果timeout过，则销毁
                // 如果allowCoreThreadTimeOut为true，则timed始终为true
                if (wc <= maximumPoolSize && ! (timedOut && timed))
                    break;
                if (compareAndDecrementWorkerCount(c))
                    return null;
                c = ctl.get();  // Re-read ctl
                if (runStateOf(c) != rs)
                    continue retry;
                // else CAS failed due to workerCount change; retry inner loop
            }
            try {
                Runnable r = timed ?
                    workQueue.poll(keepAliveTime, TimeUnit.NANOSECONDS) :
                    workQueue.take();
                if (r != null)
                    return r;
                timedOut = true;
            } catch (InterruptedException retry) {
                timedOut = false;
            }
        }
    }

线程池状态大于SHUTDOWN值的两种情况

1、调用shutdown方法

当线程池调用了shutdown方法，线程池的状态会首先被设置为SHUTDOWN，然后遍历线程池中所有线程，调用一次interrupt方法，如果在休眠中的线程将会激活，激活后的线程以及调用shutdown方法本身的线程都会尝试去调用tryTerminate方法，该方法将判定如果线程池中所有记录的线程数为0，则将线程状态改为TERMINATED，这个值为3，将大于SHUTDOWN状态值。

2、调用shutdownNow方法

当线程调用了shutdownNow方法后，首先将线程的状态修改为STOP，这个状态是大于SHUTDOWN值的，接下来它也会通过中断激活线程，只是它来的更暴力一些，连加锁和一些基本判断都没有，直接中断；在调用tryTerminate之前会先清空阻塞队列中所有的元素，这些元素被组装为一个List列表作为shutdownNow方法的返回值。换句话说，没有执行的任务在shutdownNow执行后的返回值中可以得到。在程序某些必要的情况下，可以通过线程池的isTerminating，isTerminated，isStopped，isShutdown来对线程做一些状态判定。

KeepAliveTime参数

workQueue.poll(keepAliveTime, TimeUnit.NANOSECONDS)

当阻塞队列中没有任务时，等待时间达到keepAliveTime毫秒值时就会被自动唤醒，而不会永远地沉睡下去。

keepAliveTime，如果是通过newCachedThreadPool的话，默认是1分钟超时，如果遇到前面所提到的瞬间冲击，那么线程池数量将瞬间快速膨胀，而且这些瞬间膨胀的线程的生命周期最少在1分钟以上。

如果设置了该参数，那么当timeout的时候，就return null，就会跳出循环，回收线程。

if (wc <= maximumPoolSize && ! (timedOut && timed))
                    break;
                if (compareAndDecrementWorkerCount(c))
                    return null;

allowCoreThreadTimeout : 默认情况下核心线程不会退出，可通过将该参数设置为true，让核心线程也退出。

默认的Executors工厂，只有newCachedThreadPool，timeout为60秒，出现timeout情况下，而且线程数超过了核心线程数，会销毁销毁线程。保持在corePoolSize数（如果是cached的，corePoolSize为0）。

   /**
     * Timeout in nanoseconds for idle threads waiting for work.
     * Threads use this timeout when there are more than corePoolSize
     * present or if allowCoreThreadTimeOut. Otherwise they wait
     * forever for new work.
     */
    private volatile long keepAliveTime;
    /**
     * If false (default), core threads stay alive even when idle.
     * If true, core threads use keepAliveTime to time out waiting
     * for work.
     */
    private volatile boolean allowCoreThreadTimeOut;

线程池最小是corePoolSize，最大是maximumPoolSize，除非设置了allowCoreThreadTimeOut和超时时间，这种情况线程数可能减少到0，最大可能是Integer.MAX_VALUE。

Core pool size is the minimum number of workers to keep alive(and not allow to time out etc) unless allowCoreThreadTimeOut is set, in which case the minimum is zero.

/**
     * Creates a thread pool that creates new threads as needed, but
     * will reuse previously constructed threads when they are
     * available.  These pools will typically improve the performance
     * of programs that execute many short-lived asynchronous tasks.
     * Calls to <tt>execute</tt> will reuse previously constructed
     * threads if available. If no existing thread is available, a new
     * thread will be created and added to the pool. Threads that have
     * not been used for sixty seconds are terminated and removed from
     * the cache. Thus, a pool that remains idle for long enough will
     * not consume any resources. Note that pools with similar
     * properties but different details (for example, timeout parameters)
     * may be created using {@link ThreadPoolExecutor} constructors.
     *
     * @return the newly created thread pool
     */
    public static ExecutorService newCachedThreadPool() {
        return new ThreadPoolExecutor(0, Integer.MAX_VALUE,
                                      60L, TimeUnit.SECONDS,
                                      new SynchronousQueue<Runnable>());
    }
    /**
     * Creates a thread pool that creates new threads as needed, but
     * will reuse previously constructed threads when they are
     * available, and uses the provided
     * ThreadFactory to create new threads when needed.
     * @param threadFactory the factory to use when creating new threads
     * @return the newly created thread pool
     * @throws NullPointerException if threadFactory is null
     */
    public static ExecutorService newCachedThreadPool(ThreadFactory threadFactory) {
        return new ThreadPoolExecutor(0, Integer.MAX_VALUE,
                                      60L, TimeUnit.SECONDS,
                                      new SynchronousQueue<Runnable>(),
                                      threadFactory);
    }

超时timeout设置为0的话，表示不等待

public E poll(long timeout, TimeUnit unit) throws InterruptedException {
        return pollFirst(timeout, unit);
    }

具体如下

public E pollFirst(long timeout, TimeUnit unit)
        throws InterruptedException {
        long nanos = unit.toNanos(timeout);
        final ReentrantLock lock = this.lock;
        lock.lockInterruptibly();
        try {
            E x;
            while ( (x = unlinkFirst()) == null) {
                if (nanos <= 0)
                    return null;
                nanos = notEmpty.awaitNanos(nanos);
            }
            return x;
        } finally {
            lock.unlock();
        }
    }