centos下编译lnmp环境

uclund 部署架设环境

cp /etc/resolv.conf /etc/resolv.conf.bak

yum update -y
yum -y install gcc gcc-c++ autoconf cmake libjpeg libg libpng-devel freetype freetype-devel libxml2 libxml2-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-deves-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-idn-devel openssl openssl-devel openldap openldap-devel nss_ldclients openldap-servers gd gd2 gd-devel gd2-devel perl-CPAN ncurses-devel bison bison-devel bzip2-devel libxslt-devel zip unzip
reboot

//网卡绑定多个内网和外网 ucloud.cn下

cd /etc/sysconfig/network-scripts

cp ifcfg-eth0 ifcfg-eth0:1

vim ifcfg-eth0

DEVICE=eth0
IPADDR=$Publick_IP
NETMASK=255.255.255.255
BOOTPROTO=none
PEERDNS=yes
USERCTL=no
NM_CONTROLLED=no
ONBOOT=yes

vim ifcfg-eth0:1 其实这部不用操作 默认就是原来的内网配置

DEVICE=eth0:1
HWADDR=原配置中的mac地址
IPADDR=原配置的内网ip地址
NETMASK=255.255.0.0
BOOTPROTO=none
PEERDNS=yes
USERCTL=no
NM_CONTROLLED=no
ONBOOT=yes
DNS1=原配置
DNS2=原配置
DNS3=原配置

vim route-eth0

10.0.0.0/8 via 10.9.0.1
default via 10.9.0.1 src $Public_IP

service network restart

vim /etc/sysconfig/iptables

-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT

添加iptables规则：

iptables -t nat -A PREROUTING ! -s 10.0.0.0/8 -d 内网ip/32 -j DNAT --to-destination $Publick_IP

iptables -t nat -A POSTROUTING -s 外网ip/32 -j SNAT --to-source 内网ip

umount /dev/vdb
fdisk -l
fdisk /dev/vdb
n
p
1
[enter]
[enter]
w

去掉vdb1的自动加载

vim /etc/fstab
mkdir /web
mkfs.ext3 /dev/vdb1
vim /etc/fstab

/dev/vdb1    /web    ext3    defaults     0 0

mount -a

安装mysql-5.6.26

创建mysql用户和组
groupadd mysql
useradd -g mysql -s /usr/sbin/nologin mysql
mkdir -p /web/mysql/data
mkdir -p /web/mysql/logs
mkdir -p /usr/local/mysql
chown -R mysql:mysql /usr/local/mysql
chown -R mysql:mysql /web/mysql

编译安装mysql
tar zxvf mysql-5.6.26.tar.gz
cd mysql-5.6.26

cmake \
-DCMAKE_INSTALL_PREFIX=/usr/local/mysql \
-DMYSQL_DATADIR=/web/mysql/data \
-DSYSCONFDIR=/etc \
-DMYSQL_UNIX_ADDR=/tmp/mysql.sock \
-DMYSQL_TCP_PORT=3306 \
-DDEFAULT_CHARSET=utf8 \
-DDEFAULT_COLLATION=utf8_general_ci \
-DWITH_READLINE=1-DWITH_SSL=system \
-DWITH_EMBEDDED_SERVER=1 \
-DENABLED_LOCAL_INFILE=1 \
-DWITH_MYISAM_STORAGE_ENGINE=1 \
-DWITH_INNOBASE_STORAGE_ENGINE=1 \
-DWITH_PARTITION_STORAGE_ENGINE=1 \
-DWITH_DEBUG=0

make && make install

============可能遇到的编译错误===========
出现函数gets错误的
解决办法:
rm -f CMakeCache.txt

yum -y install ncurses-devel

修改配置文件
cp ./support-files/my-medium.cnf /etc/my.cnf
vi /etc/my.cnf

 输入以下内容（可以先清空默认内容）:

[mysqld]
datadir=/web/mysql/data
socket=/tmp/mysql.sock
user=mysql
symbolic-links=0
[mysqld_safe]
log-error=/web/mysql/logs/mysqld.log
pid-file=/web/mysql/mysqld.pid
user=mysql
tmpdir=/tmp

or
cp /web/lanmp/my.cnf /etc/my.cnf

初始化数据库
/usr/local/mysql/scripts/mysql_install_db \
--user=mysql \
--basedir=/usr/local/mysql \
--datadir=/web/mysql/data

配置开机自启动
cp ./support-files/mysql.server /etc/init.d/mysqld
chmod +x /etc/init.d/mysqld
chkconfig --add mysqld
chkconfig mysqld on

添加MySQL的软链接以适应init脚本
ln -sv /usr/local/mysql/bin/mysql /usr/sbin/mysql
ln -sv /usr/local/mysql/bin/mysqladmin /usr/sbin/mysqladmin
ln -sv /usr/local/mysql/bin/mysqldump /usr/sbin/mysqldump

启动mysql
service mysqld start  # 或 /etc/init.d/mysqld start

修改root密码：

mysqladmin -uroot password '新密码'

mysql -uroot -p
输入新密码
create user 'duigou'@'%' identified by '密码'
create user 'duigou'@'localhost' identified by '密码'
create database duigou default character set utf8mb4 collate utf8mb4_general_ci;
grant all privileges on duigou.* to 'duigou'@'%' identified by '密码';
grant all privileges on duigou.* to 'duigou'@'localhost' identified by '密码';

======================================================================================
或者重新配置一个超级管理员并删除root
GRANT ALL PRIVILEGES ON . TO 'admin'@'localhost' IDENTIFIED BY '12345678';
GRANT ALL PRIVILEGES ON . TO 'admin'@'127.0.0.1' IDENTIFIED BY '12345678';

DELETE FROM user WHERE user!='admin'; #删除原先默认的用户，仅保留新建的admin用户

第三步：安装nginx-1.8.0

添加www用户和组、创建网站虚拟目录
groupadd www
useradd -g www -s /usr/sbin/nologin www
mkdir -p /web/htdocs/www
chmod +w /web/htdocs/www
chown -R www:www /web/htdocs/www
mkdir -p /web/htdocs/logs
chmod +w /web/htdocs/logs
chown -R www:www /web/htdocs/logs

安装Nginx所需的pcre库
tar zxvf pcre-8.37.tar.gz
cd pcre-8.37
./configure
make && make install
ln -s /usr/local/lib/libpcre.so.1 /usr/lib64/libpcre.so.1
cd ..

安装nginx-1.8.0
tar zxvf nginx-1.8.0.tar.gz
cd nginx-1.8.0
./configure \
--user=www \
--group=www \
--prefix=/usr/local/nginx \
--with-http_stub_status_module \
--with-http_ssl_module \
--with-http_realip_module \
--with-http_image_filter_module

make && make install

创建Nginx配置文件和创建fcgi.conf文件
cp -f /web/lanmp/nginx.conf.uclound /usr/local/nginx/conf/nginx.conf
cp -f /web/lanmp/fastcgi.conf /usr/local/nginx/conf/fastcgi.conf

启动nginx
ulimit -SHn 65535
/usr/local/nginx/sbin/nginx 直接启动

配置开机自启动
cp /web/lanmp/initd/nginx /etc/init.d/nginx
chmod +x /etc/init.d/nginx
chkconfig nginx on
service nginx start|stop|restart|reload

第四步：安装php5.5.13

cd ..
tar zxvf libiconv-1.14.tar.gz
cd libiconv-1.14
./configure --prefix=/usr/local
make && make install

=====================================================================
编译libiconv解决./stdio.h:1010:1: 错误： ‘gets’未声明(不在函数内)
cd srclib/
sed -i -e '/gets is a security/d' ./stdio.in.h
cd ../
make

make install

cd ..
tar zxvf libmcrypt-2.5.7.tar.gz
cd libmcrypt-2.5.7/
./configure
make && make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make && make install

cd ..
cd ..
tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make && make install

对共享库做符号链接

ln -s /usr/local/lib/libmcrypt.la /usr/lib64/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib64/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib64/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib64/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib64/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib64/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib64/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib64/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib64/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
ln -s /usr/local/mysql/lib/libmysqlclient.so.18 /usr/lib64/libmysqlclient.so.18

cd ..
tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make && make install

=====================================================================
遇到问题：configure: error: * libmcrypt was not found
继续查找，还是变量的问题
解决方法如下：运行

export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH

安装php：
cd ..
tar zxvf php-5.6.11.tar.gz
cd php-5.6.11

./configure \
--prefix=/usr/local/php \
--with-config-file-path=/usr/local/php/etc \
--with-mysql=/usr/local/mysql \
--with-mysqli=/usr/local/mysql/bin/mysql_config \
--enable-fpm \
--enable-calendar \
--enable-dba \
--enable-wddx \
--enable-opcache \
--with-fpm-user=php-fpm \
--with-fpm-group=php-fpm \
--with-mysql=mysqlnd \
--with-mysql-sock=/tmp/mysql.sock \
--with-libxml-dir=/usr \
--with-xsl \
--with-gd \
--with-bz2 \
--with-kerberos \
--with-jpeg-dir \
--with-png-dir \
--with-zlib \
--with-freetype-dir \
--with-iconv-dir \
--with-zlib-dir \
--with-mcrypt \
--enable-soap \
--enable-gd-native-ttf \
--enable-ftp \
--enable-sockets \
--enable-zip \
--enable-posix \
--enable-pcntl \
--enable-mbstring \
--enable-fpm --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf \
--with-openssl --with-mhash --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap \
--enable-mbregex \
--enable-sysvsem \
--enable-sockets \
--enable-shmop \
--enable-bcmath \
--enable-xml \
--enable-exif \
--disable-ipv6 \
--with-pear \
--with-curl \
--with-openssl \
--with-pdo-mysql \

--enable-magic-quotes \
--disable-fileinfo \

注：如果内存较大 可以去掉--disable-fileinfo

======================================================
configure: error: Please reinstall the BZip2 distribution
yum install bzip2-devel.x86_64 -y

error: xslt-config not found. Please reinstall the libxslt >= 1.1.0 distribution

yum install libxslt-devel -y

make ZEND_EXTRA_LIBS='-liconv'

make
如果直接make出错make: * [sapi/cli/php] Error 1

make ZEND_EXTRA_LIBS='-liconv'

make install

php.ini设置

cp /web/lanmp/php.ini /usr/local/php/etc/php.ini
cp /web/lanmp/php-fpm.conf /usr/local/php/etc/php-fpm.conf

fpm加入自启动
cp /web/lanmp/initd/php-fpm /etc/init.d/php-fpm
chmod +x /etc/init.d/php-fpm
chkconfig php-fpm on
service php-fpm start|stop|restart|reload

vi /etc/rc.local

输入

ulimit -SHn 65535

以上简单部署 下面是增加部分的扩展和优化

编译PHP扩展模块memcache、pdo_mysql、imagick
tar zxvf memcache-3.0.8.tgz
cd memcache-3.0.8
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
出错出现configure: error: mysql_query missing!? 解决方法 ./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/local/mysql
make出错
make && make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config --with-pdo-mysql=/usr/local/mysql
ln -s /usr/local/mysql/include/* /usr/local/include/
make
make install
cd ../

tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-3.2.0RC1.tgz
cd imagick-3.2.0RC1
/usr/local/php/bin/phpize
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
./configure --with-php-config=/usr/local/php/bin/php-config
make
make install
cd ../

修改php.ini配置文件
vi /usr/local/php/etc/php.ini

查找; extension_dir = "/" 将前面的;去掉并修改为

extension_dir = "/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/"

并加入

extension=memcache.so
extension=pdo_mysql.so
extension=imagick.so

执行下面的命令使配置文件立即生效：
kill -USR2 cat /usr/local/php/var/run/php-fpm.pid

其他（可选）：

优化linux内核参数

vi /etc/sysctl.conf

在末尾增加以下内容：

Add

net.ipv4.tcp_max_syn_backlog = 65536
net.core.netdev_max_backlog = 32768
net.core.somaxconn = 32768

net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216

net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 2

net.ipv4.tcp_tw_recycle = 1

net.ipv4.tcp_tw_len = 1

net.ipv4.tcp_tw_reuse = 1

net.ipv4.tcp_mem = 94500000 915000000 927000000
net.ipv4.tcp_max_orphans = 3276800

net.ipv4.tcp_fin_timeout = 30

net.ipv4.tcp_keepalive_time = 120

net.ipv4.ip_local_port_range = 1024 65535

使配置立即生效：
/sbin/sysctl -p

安装opcache（因为PHP 5.5已经集成Zend Opcache，可以替代eaccelerator）
tar zxvf zendopcache-7.0.3.tgz
cd zendopcache-7.0.3
/usr/local/php/bin/phpize
./configure --with-php-config=/usr/local/php/bin/php-config
make
make install
cd ../

在php.ini中加入下面配置：

[opcache]
zend_extension="/usr/local/php/lib/php/extensions/no-debug-non-zts-20121212/opcache.so"
opcache.memory_consumption=128
opcache.interned_strings_buffer=8
opcache.max_accelerated_files=4000
opcache.revalidate_freq=60
opcache.fast_shutdown=1
opcache.enable_cli=1
?
1
2 # 使php.ini配置文件立即生效
kill -USR2 cat /usr/local/php/var/run/php-fpm.pid

常用命令：

修改完php.ini后执行：

kill -USR2 cat /usr/local/php/var/run/php-fpm.pid

修改完nginx.conf后执行

/usr/local/nginx/sbin/nginx -s reload

重启mysql服务执行：

service mysqld (start|stop|restart)