centos7下安装svn并配置apache

安装apahce、svn和必要dav模块

yum install -y httpd subversion mod_dav_svn

创建svn项目并配置

创建仓库

mkdir -p /web/svn/myrepo
#apache用户和组是安装httpd 自动创建的
chown -R apache:apache /web/svn/myrepo
svnadmin create /web/svn/myrepo

配置文件

passwd 账号

### This file is an example password file for svnserve.
### Its format is similar to that of svnserve.conf. As shown in the
### example below it contains one section labelled [users].
### The name and password for each user follow, one account per line.

[users]
# harry = harryssecret
# sally = sallyssecret
qikailin = x12345678
test = t12345678

authz 权限

### This file is an example authorization file for svnserve.
### Its format is identical to that of mod_authz_svn authorization
### files.
### As shown below each section defines authorizations for the path and
### (optional) repository specified by the section name.
### The authorizations follow. An authorization line can refer to:
###  - a single user,
###  - a group of users defined in a special [groups] section,
###  - an alias defined in a special [aliases] section,
###  - all authenticated users, using the '$authenticated' token,
###  - only anonymous users, using the '$anonymous' token,
###  - anyone, using the '*' wildcard.
###
### A match can be inverted by prefixing the rule with '~'. Rules can
### grant read ('r') access, read-write ('rw') access, or no access
### ('').

[aliases]
# joe = /C=XZ/ST=Dessert/L=Snake City/O=Snake Oil, Ltd./OU=Research Institute/CN=Joe Average

[groups]
# harry_and_sally = harry,sally
# harry_sally_and_joe = harry,sally,&joe

# [/foo/bar]
# harry = rw
# &joe = r
# * =

#增加仓库根目录的用户权限
[/]
qikailin = rw
test = rw

# [repository:/baz/fuz]
# @harry_and_sally = rw
# * = r

svnserve.conf 配置，可直接copy

### This file controls the configuration of the svnserve daemon, if you
### use it to allow access to this repository.  (If you only allow
### access through http: and/or file: URLs, then this file is
### irrelevant.)

### Visit http://subversion.apache.org/ for more information.

[general]
### The anon-access and auth-access options control access to the
### repository for unauthenticated (a.k.a. anonymous) users and
### authenticated users, respectively.
### Valid values are "write", "read", and "none".
### Setting the value to "none" prohibits both reading and writing;
### "read" allows read-only access, and "write" allows complete
### read/write access to the repository.
### The sample settings below are the defaults and specify that anonymous
### users have read-only access to the repository, while authenticated
### users have read and write access to the repository.
anon-access = none
auth-access = write
### The password-db option controls the location of the password
### database file.  Unless you specify a path starting with a /,
### the file's location is relative to the directory containing
### this configuration file.
### If SASL is enabled (see below), this file will NOT be used.
### Uncomment the line below to use the default password file.
password-db = passwd
### The authz-db option controls the location of the authorization
### rules for path-based access control.  Unless you specify a path
### starting with a /, the file's location is relative to the the
### directory containing this file.  If you don't specify an
### authz-db, no path-based access control is done.
### Uncomment the line below to use the default authorization file.
authz-db = authz
### This option specifies the authentication realm of the repository.
### If two repositories have the same authentication realm, they should
### have the same password database, and vice versa.  The default realm
### is repository's uuid.
realm = /web/svn/myrepo
### The force-username-case option causes svnserve to case-normalize
### usernames before comparing them against the authorization rules in the
### authz-db file configured above.  Valid values are "upper" (to upper-
### case the usernames), "lower" (to lowercase the usernames), and
### "none" (to compare usernames as-is without case conversion, which
### is the default behavior).
# force-username-case = none

[sasl]
### This option specifies whether you want to use the Cyrus SASL
### library for authentication. Default is false.
### This section will be ignored if svnserve is not built with Cyrus
### SASL support; to check, run 'svnserve --version' and look for a line
### reading 'Cyrus SASL authentication is available.'
# use-sasl = true
### These options specify the desired strength of the security layer
### that you want SASL to provide. 0 means no encryption, 1 means
### integrity-checking only, values larger than 1 are correlated
### to the effective key length for encryption (e.g. 128 means 128-bit
### encryption). The values below are the defaults.
# min-encryption = 0
# max-encryption = 256

启动服务

/usr/bin/svnserve -d --listen-port 3690 -r /web/svn/myrepo--log-file=/web/svn/myrepo/myrepo.log --pid-file=/web/svn/myrepo/myrepo.pid

配置apache和dav模块

修改apache的默认80端口

vim /etc/httpd/conf/httpd.conf

#修改
Listen 80 -> Listen 8090

创建subversion配置

vim /etc/httpd/conf.d/subversion.conf

#LoadModule dav_fs /usr/lib64/httpd/modules/mod_dav_fs.so
#LoadModule dav_module /usr/lib64/httpd/modules/mod_dav.so
#LoadModule dav_svn_module /usr/lib64/httpd/modules/mod_dav_svn.so
#LoadModule authz_svn_module /usr/lib64/httpd/modules/mod_authz_svn.so
IncludeOptional /etc/httpd/conf.modules.d/00-base.conf
IncludeOptional /etc/httpd/conf.modules.d/00-dav.conf
IncludeOptional /etc/httpd/conf.modules.d/10-subversion.conf

<Location /svn>
    DAV svn
    AuthType Basic
    AuthName "DAV SVN"
    AuthUserFile /web/svn/.hd_myrepo_svnpasswd #配置授权文件
    Require valid-user
    SVNPath /web/svn/myrepo #你的svn的仓库目录
</Location>

配置.hd_myrepo_svnpasswd授权

#qklin 你要创建的用户名，需要输入两次密码
#注意这里-cm 第一次需要有c参数，后续增加用户可以不带c
htpasswd -cm /web/svn/.hd_myrepo_svnpasswd qklin

防火墙增加8090端口

#添加8090 （--permanent永久生效，没有此参数重启后失效）
firewall-cmd --zone=public --add-port=8090/tcp --permanent    
#重新载入
firewall-cmd --reload
#查看
firewall-cmd --zone= public --query-port=8090/tcp
#删除
firewall-cmd --zone= public --remove-port=8090/tcp --permanent
#查看所有打开的端口
firewall-cmd --zone=public --list-ports

启动并开机运行apache

systemctl enable httpd.service

systemctl start httpd