区块链教程Fabric1.0源代码分析Peer peer chaincode命令及子命令实现

头像
兄弟连区块链
    阅读 10 分钟

    　　兄弟连区块链教程Fabric1.0源代码分析Peer peer chaincode命令及子命令实现，2018年下半年，区块链行业正逐渐褪去发展之初的浮躁、回归理性，表面上看相关人才需求与身价似乎正在回落。但事实上，正是初期泡沫的渐退，让人们更多的关注点放在了区块链真正的技术之上。

    Fabric 1.0源代码笔记 之 Peer #peer chaincode命令及子命令实现

    1、peer chaincode install子命令实现（安装链码）

    1.0、peer chaincode install子命令概述

    peer chaincode install，将链码的源码和环境封装为一个链码安装打包文件，并传输到背书节点。

    peer chaincode install支持如下两种方式：

    • 指定代码方式，peer chaincode install -n <链码名称> -v <链码版本> -p <链码路径>
    • 基于链码打包文件方式，peer chaincode install <链码打包文件>

    有个图3

    1.1、初始化Endorser客户端

    cf, err = InitCmdFactory(true, false)
//代码在peer/chaincode/install.go

    cf, err = InitCmdFactory(true, false)代码如下：

    func InitCmdFactory(isEndorserRequired, isOrdererRequired bool) (*ChaincodeCmdFactory, error) {
    var err error
    var endorserClient pb.EndorserClient
    if isEndorserRequired {
        //获取Endorser客户端
        endorserClient, err = common.GetEndorserClientFnc() //func GetEndorserClient() (pb.EndorserClient, error)
    }
    //获取签名
    signer, err := common.GetDefaultSignerFnc()
    var broadcastClient common.BroadcastClient
    if isOrdererRequired {
        //此处未用到，暂略
    }
    //构造ChaincodeCmdFactory
    return &ChaincodeCmdFactory{
        EndorserClient:  endorserClient,
        Signer:          signer,
        BroadcastClient: broadcastClient,
    }, nil
}
//代码在peer/chaincode/common.go

    1.2、构造ChaincodeDeploymentSpec消息（链码信息及链码文件打包）

    if ccpackfile == "" { //指定代码方式，重新构造构造ChaincodeDeploymentSpec消息
    ccpackmsg, err = genChaincodeDeploymentSpec(cmd, chaincodeName, chaincodeVersion)
} else { //基于链码打包文件方式，直接读取ChaincodeDeploymentSpec消息
    var cds *pb.ChaincodeDeploymentSpec
    ccpackmsg, cds, err = getPackageFromFile(ccpackfile)
}
//代码在peer/chaincode/install.go

    ccpackmsg, err = genChaincodeDeploymentSpec(cmd, chaincodeName, chaincodeVersion)代码如下：

    func genChaincodeDeploymentSpec(cmd *cobra.Command, chaincodeName, chaincodeVersion string) (*pb.ChaincodeDeploymentSpec, error) {
    //已经存在，直接报错
    if existed, _ := ccprovider.ChaincodePackageExists(chaincodeName, chaincodeVersion); existed {
        return nil, fmt.Errorf("chaincode %s:%s already exists", chaincodeName, chaincodeVersion)
    }
    spec, err := getChaincodeSpec(cmd)
    cds, err := getChaincodeDeploymentSpec(spec, true)
    return cds, nil
}
//代码在peer/chaincode/install.go

    spec, err := getChaincodeSpec(cmd)代码如下：

    func getChaincodeSpec(cmd *cobra.Command) (*pb.ChaincodeSpec, error) {
    spec := &pb.ChaincodeSpec{}
    err := checkChaincodeCmdParams(cmd) //检查参数合法性
    input := &pb.ChaincodeInput{}
    //flags.StringVarP(&chaincodeCtorJSON, "ctor", "c", "{}"，ctor为链码具体执行参数信息，默认为{}
    err := json.Unmarshal([]byte(chaincodeCtorJSON), &input)
    //flags.StringVarP(&chaincodeLang, "lang", "l", "golang"，lang为链码的编写语言，默认为golang
    chaincodeLang = strings.ToUpper(chaincodeLang)
    spec = &pb.ChaincodeSpec{
        Type:        pb.ChaincodeSpec_Type(pb.ChaincodeSpec_Type_value[chaincodeLang]),
        ChaincodeId: &pb.ChaincodeID{Path: chaincodePath, Name: chaincodeName, Version: chaincodeVersion},
        Input:       input,
    }
    return spec, nil
}
//代码在peer/chaincode/common.go

    cds, err := getChaincodeDeploymentSpec(spec, true)代码如下：

    func getChaincodeDeploymentSpec(spec *pb.ChaincodeSpec, crtPkg bool) (*pb.ChaincodeDeploymentSpec, error) {
    var codePackageBytes []byte
    if chaincode.IsDevMode() == false && crtPkg {
        var err error
        err = checkSpec(spec) //检查spec合法性
        codePackageBytes, err = container.GetChaincodePackageBytes(spec) //打包链码文件及依赖文件
    }
    //构造ChaincodeDeploymentSpec
    chaincodeDeploymentSpec := &pb.ChaincodeDeploymentSpec{ChaincodeSpec: spec, CodePackage: codePackageBytes}
    return chaincodeDeploymentSpec, nil
//代码在peer/chaincode/common.go

    1.3、创建lscc Proposal并签名

    creator, err := cf.Signer.Serialize() //获取签名者
//按ChaincodeDeploymentSpec构造Proposal，即链码ChaincodeDeploymentSpec消息作为参数传递给lscc系统链码并调用
//调用createProposalFromCDS(chainID, cds, creator, policy, escc, vscc, "deploy")
prop, _, err := utils.CreateInstallProposalFromCDS(msg, creator) 
var signedProp *pb.SignedProposal
signedProp, err = utils.GetSignedProposal(prop, cf.Signer) //签名提案
//代码在peer/chaincode/install.go

    createProposalFromCDS(chainID, cds, creator, policy, escc, vscc, "deploy")代码如下：

    func createProposalFromCDS(chainID string, msg proto.Message, creator []byte, policy []byte, escc []byte, vscc []byte, propType string) (*peer.Proposal, string, error) {
    var ccinp *peer.ChaincodeInput
    var b []byte
    var err error
    b, err = proto.Marshal(msg)
    switch propType {
    case "deploy":
        fallthrough
    case "upgrade": 
        cds, ok := msg.(*peer.ChaincodeDeploymentSpec)
        ccinp = &peer.ChaincodeInput{Args: [][]byte{[]byte(propType), []byte(chainID), b, policy, escc, vscc}}
    case "install": 
        ccinp = &peer.ChaincodeInput{Args: [][]byte{[]byte(propType), b}}
    }
    lsccSpec := &peer.ChaincodeInvocationSpec{ //构造lscc ChaincodeInvocationSpec
        ChaincodeSpec: &peer.ChaincodeSpec{
            Type:        peer.ChaincodeSpec_GOLANG,
            ChaincodeId: &peer.ChaincodeID{Name: "lscc"},
            Input:       ccinp}}

    return CreateProposalFromCIS(common.HeaderType_ENDORSER_TRANSACTION, chainID, lsccSpec, creator)
}
//代码在protos/utils/proputils.go

    1.4、提交并处理Proposal

    proposalResponse, err := cf.EndorserClient.ProcessProposal(context.Background(), signedProp)
//代码在peer/chaincode/install.go

    2、peer chaincode instantiate子命令实现（实例化链码）

    2.0、peer chaincode instantiate概述

    peer chaincode instantiate命令通过构造生命周期管理系统链码（LSCC）的交易，将安装过的链码在指定通道上进行实例化调用。
    在peer上创建容器启动，并执行初始化操作。

    2.1、初始化EndorserClient、Signer、及BroadcastClient

    与2.1接近，附BroadcastClient初始化代码如下：

    cf, err = InitCmdFactory(true, true)
//代码在peer/chaincode/instantiate.go
    func InitCmdFactory(isEndorserRequired, isOrdererRequired bool) (*ChaincodeCmdFactory, error) {
    //初始化EndorserClient、Signer
    var broadcastClient common.BroadcastClient
    if isOrdererRequired {
        //flags.StringVarP(&orderingEndpoint, "orderer", "o", "", "Ordering service endpoint")
        //orderingEndpoint为orderer服务地址
        broadcastClient, err = common.GetBroadcastClientFnc(orderingEndpoint, tls, caFile)
    }
}
//代码在peer/chaincode/common.go

    BroadcastClient更详细内容，参考Fabric 1.0源代码笔记 之 Peer #BroadcastClient（Broadcast客户端）

    2.2、构造ChaincodeDeploymentSpec消息

    spec, err := getChaincodeSpec(cmd) //构造ChaincodeSpec，参考本文1.2
//构造ChaincodeDeploymentSpec，参考本文1.2，但无法打包链码文件
cds, err := getChaincodeDeploymentSpec(spec, false)
//代码在peer/chaincode/instantiate.go

    2.3、创建lscc Proposal并签名

    creator, err := cf.Signer.Serialize() //获取签名者
//policyMarhsalled为flags.StringVarP(&policy, "policy", "P", common.UndefinedParamValue,即链码关联的背书策略
//即调用 createProposalFromCDS(chainID, cds, creator, policy, escc, vscc, "deploy")，参考本文1.3
prop, _, err := utils.CreateDeployProposalFromCDS(chainID, cds, creator, policyMarhsalled, []byte(escc), []byte(vscc))
var signedProp *pb.SignedProposal
signedProp, err = utils.GetSignedProposal(prop, cf.Signer) //签名提案
//代码在peer/chaincode/instantiate.go

    2.4、提交并处理Proposal、获取Proposal响应并创建签名交易Envelope

    proposalResponse, err := cf.EndorserClient.ProcessProposal(context.Background(), signedProp)
if proposalResponse != nil {
    env, err := utils.CreateSignedTx(prop, cf.Signer, proposalResponse) //由Proposal创建签名交易Envelope
    return env, nil
}
//代码在peer/chaincode/instantiate.go

    env, err := utils.CreateSignedTx(prop, cf.Signer, proposalResponse)代码如下：

    func CreateSignedTx(proposal *peer.Proposal, signer msp.SigningIdentity, resps ...*peer.ProposalResponse) (*common.Envelope, error) {
    hdr, err := GetHeader(proposal.Header) //反序列化为common.Header
    pPayl, err := GetChaincodeProposalPayload(proposal.Payload) //反序列化为peer.ChaincodeProposalPayload
    signerBytes, err := signer.Serialize() //signer序列化
    shdr, err := GetSignatureHeader(hdr.SignatureHeader) //反序列化为common.SignatureHeader
    if bytes.Compare(signerBytes, shdr.Creator) != 0 { //Proposal创建者需与当前签名者相同
        return nil, fmt.Errorf("The signer needs to be the same as the one referenced in the header")
    }
    hdrExt, err := GetChaincodeHeaderExtension(hdr) //Header.ChannelHeader反序列化为peer.ChaincodeHeaderExtension

    var a1 []byte
    for n, r := range resps {
        if n == 0 {
            a1 = r.Payload
            if r.Response.Status != 200 { //检查Response.Status是否为200
                return nil, fmt.Errorf("Proposal response was not successful, error code %d, msg %s", r.Response.Status, r.Response.Message)
            }
            continue
        }
        if bytes.Compare(a1, r.Payload) != 0 { //检查所有ProposalResponse.Payload是否相同
            return nil, fmt.Errorf("ProposalResponsePayloads do not match")
        }
    }

    endorsements := make([]*peer.Endorsement, len(resps))
    for n, r := range resps {
        endorsements[n] = r.Endorsement
    }

    //如下为逐层构建common.Envelope
    cea := &peer.ChaincodeEndorsedAction{ProposalResponsePayload: resps[0].Payload, Endorsements: endorsements}
    propPayloadBytes, err := GetBytesProposalPayloadForTx(pPayl, hdrExt.PayloadVisibility)
    cap := &peer.ChaincodeActionPayload{ChaincodeProposalPayload: propPayloadBytes, Action: cea}
    capBytes, err := GetBytesChaincodeActionPayload(cap)
    taa := &peer.TransactionAction{Header: hdr.SignatureHeader, Payload: capBytes}
    taas := make([]*peer.TransactionAction, 1)
    taas[0] = taa
    tx := &peer.Transaction{Actions: taas}
    txBytes, err := GetBytesTransaction(tx)
    payl := &common.Payload{Header: hdr, Data: txBytes}
    paylBytes, err := GetBytesPayload(payl)
    sig, err := signer.Sign(paylBytes)
    return &common.Envelope{Payload: paylBytes, Signature: sig}, nil
}

//代码在protos/utils/txutils.go

    common.Envelope更详细内容，参考：Fabric 1.0源代码笔记 之 附录-关键数据结构

    2.5、向orderer广播交易Envelope

    err = cf.BroadcastClient.Send(env)
//代码在peer/chaincode/instantiate.go

    3、peer chaincode invoke子命令实现（调用链码）

    3.0、peer chaincode invoke概述

    通过invoke命令可以调用运行中的链码的方法。
    .png)

    3.1、初始化EndorserClient、Signer、及BroadcastClient

    参考本文1.1和2.1。

    cf, err = InitCmdFactory(true, true)
//代码在peer/chaincode/invoke.go

    3.2、构造ChaincodeInvocationSpec

    spec, err := getChaincodeSpec(cmd) //构造ChaincodeSpec
invocation := &pb.ChaincodeInvocationSpec{ChaincodeSpec: spec} //构造ChaincodeInvocationSpec
//代码在peer/chaincode/common.go

    3.3、创建Chaincode Proposal并签名

    creator, err := signer.Serialize()
var prop *pb.Proposal
prop, _, err = putils.CreateProposalFromCIS(pcommon.HeaderType_ENDORSER_TRANSACTION, cID, invocation, creator)
var signedProp *pb.SignedProposal
signedProp, err = putils.GetSignedProposal(prop, signer) //Proposal签名
//代码在peer/chaincode/common.go

    3.4、提交并处理Proposal、获取Proposal响应

    var proposalResp *pb.ProposalResponse
proposalResp, err = endorserClient.ProcessProposal(context.Background(), signedProp)
//代码在peer/chaincode/common.go

    3.5、创建签名交易Envelope并向orderer广播交易Envelope

    if invoke {
    env, err := putils.CreateSignedTx(prop, signer, proposalResp) //创建签名交易
    err = bc.Send(env) //广播交易
}
//代码在peer/chaincode/common.go

    4、peer chaincode query子命令实现（查询链码）

    与3、peer chaincode invoke子命令实现（调用链码）基本相同，区别在于提交并处理Proposal后，不再创建交易以及广播交易。

    fabric命令行区块链
    兄弟连区块链
    0 声望1 粉丝
    « 上一篇
    区块链教程Fabric1.0源代码分析Peer EndorserClient（Endorser客户端）
    下一篇 »
    兄弟连区块链教程Fabric1.0源代码分析Peer peer根命令入口及加载子命令一

    引用和评论

    推荐阅读
    头像
    区块链教程Fabric1.0源代码分析Peer（Endorser服务端）

    兄弟连区块链阅读 1.9k

    头像
    fabric.js 实现服装/商品定制预览效果

    秦少卫赞 2阅读 401

    头像
    300行ABAP代码实现一个最简单的区块链原型

    注销阅读 2.4k

    头像
    基于区块链技术的超级账本(Hyperledger) - 从理论到实战

    注销阅读 2.3k

    头像
    Follow ｜下一代信息浏览器 第二弹来了

    Meng小羽赞 1阅读 492

    头像
    直击黑客松：Solana 开发实战 — Web3 开发免费共学营（第25期）

    Hackquest阅读 631

    头像
    成为 Web3 开发者：why and how

    OpenBuild赞 1阅读 151

    0 条评论
    得票最新