聊聊flink的logback配置

序

本文主要研究一下flink的logback配置

client端pom文件配置

<dependencies>
    <!-- Add the two required logback dependencies -->
    <dependency>
        <groupId>ch.qos.logback</groupId>
        <artifactId>logback-core</artifactId>
        <version>1.2.3</version>
    </dependency>
    <dependency>
        <groupId>ch.qos.logback</groupId>
        <artifactId>logback-classic</artifactId>
        <version>1.2.3</version>
    </dependency>

    <!-- Add the log4j -> sfl4j (-> logback) bridge into the classpath
     Hadoop is logging to log4j! -->
    <dependency>
        <groupId>org.slf4j</groupId>
        <artifactId>log4j-over-slf4j</artifactId>
        <version>1.7.15</version>
    </dependency>

    <dependency>
        <groupId>org.apache.flink</groupId>
        <artifactId>flink-java</artifactId>
        <version>1.7.1</version>
        <exclusions>
            <exclusion>
                <groupId>log4j</groupId>
                <artifactId>*</artifactId>
            </exclusion>
            <exclusion>
                <groupId>org.slf4j</groupId>
                <artifactId>slf4j-log4j12</artifactId>
            </exclusion>
        </exclusions>
    </dependency>
    <dependency>
        <groupId>org.apache.flink</groupId>
        <artifactId>flink-streaming-java_2.11</artifactId>
        <version>1.7.1</version>
        <exclusions>
            <exclusion>
                <groupId>log4j</groupId>
                <artifactId>*</artifactId>
            </exclusion>
            <exclusion>
                <groupId>org.slf4j</groupId>
                <artifactId>slf4j-log4j12</artifactId>
            </exclusion>
        </exclusions>
    </dependency>
    <dependency>
        <groupId>org.apache.flink</groupId>
        <artifactId>flink-clients_2.11</artifactId>
        <version>1.7.1</version>
        <exclusions>
            <exclusion>
                <groupId>log4j</groupId>
                <artifactId>*</artifactId>
            </exclusion>
            <exclusion>
                <groupId>org.slf4j</groupId>
                <artifactId>slf4j-log4j12</artifactId>
            </exclusion>
        </exclusions>
    </dependency>
</dependencies>

添加logback-core、logback-classic及log4j-over-slf4j依赖，之后对flink-java、flink-streaming-java_2.11、flink-clients_2.11等配置log4j及slf4j-log4j12的exclusions；最后通过mvn dependency:tree查看是否还有log4j12，以确认下是否都全部排除了

服务端配置

添加logback-classic.jar、logback-core.jar、log4j-over-slf4j.jar到flink的lib目录下(比如/opt/flink/lib)
移除flink的lib目录下(比如/opt/flink/lib)log4j及slf4j-log4j12的jar(比如log4j-1.2.17.jar及slf4j-log4j12-1.7.15.jar)
如果要自定义logback的配置的话，可以覆盖flink的conf目录下的logback.xml、logback-console.xml或者logback-yarn.xml

flink-daemon.sh

flink-release-1.7.1/flink-dist/src/main/flink-bin/bin/flink-daemon.sh

#!/usr/bin/env bash
################################################################################
#  Licensed to the Apache Software Foundation (ASF) under one
#  or more contributor license agreements.  See the NOTICE file
#  distributed with this work for additional information
#  regarding copyright ownership.  The ASF licenses this file
#  to you under the Apache License, Version 2.0 (the
#  "License"); you may not use this file except in compliance
#  with the License.  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
# limitations under the License.
################################################################################

# Start/stop a Flink daemon.
USAGE="Usage: flink-daemon.sh (start|stop|stop-all) (taskexecutor|zookeeper|historyserver|standalonesession|standalonejob) [args]"

STARTSTOP=$1
DAEMON=$2
ARGS=("${@:3}") # get remaining arguments as array

bin=`dirname "$0"`
bin=`cd "$bin"; pwd`

. "$bin"/config.sh

case $DAEMON in
    (taskexecutor)
        CLASS_TO_RUN=org.apache.flink.runtime.taskexecutor.TaskManagerRunner
    ;;

    (zookeeper)
        CLASS_TO_RUN=org.apache.flink.runtime.zookeeper.FlinkZooKeeperQuorumPeer
    ;;

    (historyserver)
        CLASS_TO_RUN=org.apache.flink.runtime.webmonitor.history.HistoryServer
    ;;

    (standalonesession)
        CLASS_TO_RUN=org.apache.flink.runtime.entrypoint.StandaloneSessionClusterEntrypoint
    ;;

    (standalonejob)
        CLASS_TO_RUN=org.apache.flink.container.entrypoint.StandaloneJobClusterEntryPoint
    ;;

    (*)
        echo "Unknown daemon '${DAEMON}'. $USAGE."
        exit 1
    ;;
esac

if [ "$FLINK_IDENT_STRING" = "" ]; then
    FLINK_IDENT_STRING="$USER"
fi

FLINK_TM_CLASSPATH=`constructFlinkClassPath`

pid=$FLINK_PID_DIR/flink-$FLINK_IDENT_STRING-$DAEMON.pid

mkdir -p "$FLINK_PID_DIR"

# Log files for daemons are indexed from the process ID's position in the PID
# file. The following lock prevents a race condition during daemon startup
# when multiple daemons read, index, and write to the PID file concurrently.
# The lock is created on the PID directory since a lock file cannot be safely
# removed. The daemon is started with the lock closed and the lock remains
# active in this script until the script exits.
command -v flock >/dev/null 2>&1
if [[ $? -eq 0 ]]; then
    exec 200<"$FLINK_PID_DIR"
    flock 200
fi

# Ascending ID depending on number of lines in pid file.
# This allows us to start multiple daemon of each type.
id=$([ -f "$pid" ] && echo $(wc -l < "$pid") || echo "0")

FLINK_LOG_PREFIX="${FLINK_LOG_DIR}/flink-${FLINK_IDENT_STRING}-${DAEMON}-${id}-${HOSTNAME}"
log="${FLINK_LOG_PREFIX}.log"
out="${FLINK_LOG_PREFIX}.out"

log_setting=("-Dlog.file=${log}" "-Dlog4j.configuration=file:${FLINK_CONF_DIR}/log4j.properties" "-Dlogback.configurationFile=file:${FLINK_CONF_DIR}/logback.xml")

JAVA_VERSION=$(${JAVA_RUN} -version 2>&1 | sed 's/.*version "\(.*\)\.\(.*\)\..*"/\1\2/; 1q')

# Only set JVM 8 arguments if we have correctly extracted the version
if [[ ${JAVA_VERSION} =~ ${IS_NUMBER} ]]; then
    if [ "$JAVA_VERSION" -lt 18 ]; then
        JVM_ARGS="$JVM_ARGS -XX:MaxPermSize=256m"
    fi
fi

case $STARTSTOP in

    (start)
        # Rotate log files
        rotateLogFilesWithPrefix "$FLINK_LOG_DIR" "$FLINK_LOG_PREFIX"

        # Print a warning if daemons are already running on host
        if [ -f "$pid" ]; then
          active=()
          while IFS='' read -r p || [[ -n "$p" ]]; do
            kill -0 $p >/dev/null 2>&1
            if [ $? -eq 0 ]; then
              active+=($p)
            fi
          done < "${pid}"

          count="${#active[@]}"

          if [ ${count} -gt 0 ]; then
            echo "[INFO] $count instance(s) of $DAEMON are already running on $HOSTNAME."
          fi
        fi

        # Evaluate user options for local variable expansion
        FLINK_ENV_JAVA_OPTS=$(eval echo ${FLINK_ENV_JAVA_OPTS})

        echo "Starting $DAEMON daemon on host $HOSTNAME."
        $JAVA_RUN $JVM_ARGS ${FLINK_ENV_JAVA_OPTS} "${log_setting[@]}" -classpath "`manglePathList "$FLINK_TM_CLASSPATH:$INTERNAL_HADOOP_CLASSPATHS"`" ${CLASS_TO_RUN} "${ARGS[@]}" > "$out" 200<&- 2>&1 < /dev/null &

        mypid=$!

        # Add to pid file if successful start
        if [[ ${mypid} =~ ${IS_NUMBER} ]] && kill -0 $mypid > /dev/null 2>&1 ; then
            echo $mypid >> "$pid"
        else
            echo "Error starting $DAEMON daemon."
            exit 1
        fi
    ;;

    (stop)
        if [ -f "$pid" ]; then
            # Remove last in pid file
            to_stop=$(tail -n 1 "$pid")

            if [ -z $to_stop ]; then
                rm "$pid" # If all stopped, clean up pid file
                echo "No $DAEMON daemon to stop on host $HOSTNAME."
            else
                sed \$d "$pid" > "$pid.tmp" # all but last line

                # If all stopped, clean up pid file
                [ $(wc -l < "$pid.tmp") -eq 0 ] && rm "$pid" "$pid.tmp" || mv "$pid.tmp" "$pid"

                if kill -0 $to_stop > /dev/null 2>&1; then
                    echo "Stopping $DAEMON daemon (pid: $to_stop) on host $HOSTNAME."
                    kill $to_stop
                else
                    echo "No $DAEMON daemon (pid: $to_stop) is running anymore on $HOSTNAME."
                fi
            fi
        else
            echo "No $DAEMON daemon to stop on host $HOSTNAME."
        fi
    ;;

    (stop-all)
        if [ -f "$pid" ]; then
            mv "$pid" "${pid}.tmp"

            while read to_stop; do
                if kill -0 $to_stop > /dev/null 2>&1; then
                    echo "Stopping $DAEMON daemon (pid: $to_stop) on host $HOSTNAME."
                    kill $to_stop
                else
                    echo "Skipping $DAEMON daemon (pid: $to_stop), because it is not running anymore on $HOSTNAME."
                fi
            done < "${pid}.tmp"
            rm "${pid}.tmp"
        fi
    ;;

    (*)
        echo "Unexpected argument '$STARTSTOP'. $USAGE."
        exit 1
    ;;

esac

使用flink-daemon.sh启动的flink使用的logback配置文件是logback.xml

flink-console.sh

flink-release-1.7.1/flink-dist/src/main/flink-bin/bin/flink-console.sh

#!/usr/bin/env bash
################################################################################
#  Licensed to the Apache Software Foundation (ASF) under one
#  or more contributor license agreements.  See the NOTICE file
#  distributed with this work for additional information
#  regarding copyright ownership.  The ASF licenses this file
#  to you under the Apache License, Version 2.0 (the
#  "License"); you may not use this file except in compliance
#  with the License.  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
# limitations under the License.
################################################################################

# Start a Flink service as a console application. Must be stopped with Ctrl-C
# or with SIGTERM by kill or the controlling process.
USAGE="Usage: flink-console.sh (taskexecutor|zookeeper|historyserver|standalonesession|standalonejob) [args]"

SERVICE=$1
ARGS=("${@:2}") # get remaining arguments as array

bin=`dirname "$0"`
bin=`cd "$bin"; pwd`

. "$bin"/config.sh

case $SERVICE in
    (taskexecutor)
        CLASS_TO_RUN=org.apache.flink.runtime.taskexecutor.TaskManagerRunner
    ;;

    (historyserver)
        CLASS_TO_RUN=org.apache.flink.runtime.webmonitor.history.HistoryServer
    ;;

    (zookeeper)
        CLASS_TO_RUN=org.apache.flink.runtime.zookeeper.FlinkZooKeeperQuorumPeer
    ;;

    (standalonesession)
        CLASS_TO_RUN=org.apache.flink.runtime.entrypoint.StandaloneSessionClusterEntrypoint
    ;;

    (standalonejob)
        CLASS_TO_RUN=org.apache.flink.container.entrypoint.StandaloneJobClusterEntryPoint
    ;;

    (*)
        echo "Unknown service '${SERVICE}'. $USAGE."
        exit 1
    ;;
esac

FLINK_TM_CLASSPATH=`constructFlinkClassPath`

log_setting=("-Dlog4j.configuration=file:${FLINK_CONF_DIR}/log4j-console.properties" "-Dlogback.configurationFile=file:${FLINK_CONF_DIR}/logback-console.xml")

JAVA_VERSION=$(${JAVA_RUN} -version 2>&1 | sed 's/.*version "\(.*\)\.\(.*\)\..*"/\1\2/; 1q')

# Only set JVM 8 arguments if we have correctly extracted the version
if [[ ${JAVA_VERSION} =~ ${IS_NUMBER} ]]; then
    if [ "$JAVA_VERSION" -lt 18 ]; then
        JVM_ARGS="$JVM_ARGS -XX:MaxPermSize=256m"
    fi
fi

echo "Starting $SERVICE as a console application on host $HOSTNAME."
exec $JAVA_RUN $JVM_ARGS ${FLINK_ENV_JAVA_OPTS} "${log_setting[@]}" -classpath "`manglePathList "$FLINK_TM_CLASSPATH:$INTERNAL_HADOOP_CLASSPATHS"`" ${CLASS_TO_RUN} "${ARGS[@]}"

使用flink-console.sh启动的flink使用的logback配置文件是logback-console.xml

yarn-session.sh

flink-release-1.7.1/flink-dist/src/main/flink-bin/yarn-bin/yarn-session.sh

#!/usr/bin/env bash
################################################################################
#  Licensed to the Apache Software Foundation (ASF) under one
#  or more contributor license agreements.  See the NOTICE file
#  distributed with this work for additional information
#  regarding copyright ownership.  The ASF licenses this file
#  to you under the Apache License, Version 2.0 (the
#  "License"); you may not use this file except in compliance
#  with the License.  You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
#  Unless required by applicable law or agreed to in writing, software
#  distributed under the License is distributed on an "AS IS" BASIS,
#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#  See the License for the specific language governing permissions and
# limitations under the License.
################################################################################

bin=`dirname "$0"`
bin=`cd "$bin"; pwd`

# get Flink config
. "$bin"/config.sh

if [ "$FLINK_IDENT_STRING" = "" ]; then
        FLINK_IDENT_STRING="$USER"
fi

JVM_ARGS="$JVM_ARGS -Xmx512m"

CC_CLASSPATH=`manglePathList $(constructFlinkClassPath):$INTERNAL_HADOOP_CLASSPATHS`

log=$FLINK_LOG_DIR/flink-$FLINK_IDENT_STRING-yarn-session-$HOSTNAME.log
log_setting="-Dlog.file="$log" -Dlog4j.configuration=file:"$FLINK_CONF_DIR"/log4j-yarn-session.properties -Dlogback.configurationFile=file:"$FLINK_CONF_DIR"/logback-yarn.xml"

export FLINK_CONF_DIR

$JAVA_RUN $JVM_ARGS -classpath "$CC_CLASSPATH" $log_setting org.apache.flink.yarn.cli.FlinkYarnSessionCli -j "$FLINK_LIB_DIR"/flink-dist*.jar "$@"

使用yarn-session.sh启动的flink使用的logback配置文件是logback-yarn.xml

小结

client端使用logback的话，要在pom文件添加logback-core、logback-classic及log4j-over-slf4j依赖，之后对flink-java、flink-streaming-java_2.11、flink-clients_2.11等配置log4j及slf4j-log4j12的exclusions；最后通过mvn dependency:tree查看是否还有log4j12，以确认下是否都全部排除了
服务端使用logback的话，要在添加logback-classic.jar、logback-core.jar、log4j-over-slf4j.jar到flink的lib目录下(比如/opt/flink/lib)；移除flink的lib目录下(比如/opt/flink/lib)log4j及slf4j-log4j12的jar(比如log4j-1.2.17.jar及slf4j-log4j12-1.7.15.jar)；如果要自定义logback的配置的话，可以覆盖flink的conf目录下的logback.xml、logback-console.xml或者logback-yarn.xml
使用flink-daemon.sh启动的flink使用的logback配置文件是logback.xml；使用flink-console.sh启动的flink使用的logback配置文件是logback-console.xml；使用yarn-session.sh启动的flink使用的logback配置文件是logback-yarn.xml

doc

Using Logback instead of Log4j

聊聊flink的logback配置

序

client端pom文件配置

服务端配置

flink-daemon.sh

flink-console.sh

yarn-session.sh

小结

doc

codecraft

引用和评论

Java23的新特性

饿了么基于Flink+Paimon+StarRocks的实时湖仓探索

Flink CDC：新一代实时数据集成框架

读Flink源码谈设计：图的抽象与分层

Apache Flink 2.0-preview released

Fluss：面向实时分析设计的下一代流存储

Flink在全局并行度为1，keyBy之后不同的key，Watermark的推进