数据结构
struct flow
/*
* A flow in the network.
*
* Must be initialized to all zeros to make any compiler-induced padding
* zeroed. Helps also in keeping unused fields (such as mutually exclusive
* IPv4 and IPv6 addresses) zeroed out.
*
* The meaning of 'in_port' is context-dependent. In most cases, it is a
* 16-bit OpenFlow 1.0 port number. In the software datapath interface (dpif)
* layer and its implementations (e.g. dpif-netlink, dpif-netdev), it is
* instead a 32-bit datapath port number.
*
* The fields are organized in four segments to facilitate staged lookup, where
* lower layer fields are first used to determine if the later fields need to
* be looked at. This enables better wildcarding for datapath flows.
*
* NOTE: Order of the fields is significant, any change in the order must be
* reflected in miniflow_extract()!
*/
struct flow {
/* Metadata 隧道元数据*/
struct flow_tnl tunnel; /* Encapsulating tunnel parameters. 封装的隧道元数据 */
ovs_be64 metadata; /* OpenFlow Metadata. openflow元数据，用于在表格之间传递数据 */
uint32_t regs[FLOW_N_REGS]; /* Registers. 寄存器 */
uint32_t skb_priority; /* Packet priority for QoS. 报文优先级 */
uint32_t pkt_mark; /* Packet mark. 报文标记 */
uint32_t dp_hash; /* Datapath computed hash value. The exact
* computation is opaque to the user space.
* datapath计算的hash值，这个值与用户态是无关的 */
union flow_in_port in_port; /* Input port. 报文输入端口，可以是逻辑端口，也可以是物理端口 */
uint32_t recirc_id; /* Must be exact match. 重入流水线id，用于解冻的时候，一般是mpls和bond情况 */
uint16_t ct_state; /* Connection tracking state. 连接跟踪状态 */
uint16_t ct_zone; /* Connection tracking zone. 连接跟踪区域 */
uint32_t ct_mark; /* Connection mark.连接跟踪mark */
uint8_t pad1[4]; /* Pad to 64 bits. 填充 */
ovs_u128 ct_label; /* Connection label. 连接跟踪标签 */
uint32_t conj_id; /* Conjunction ID. 关联id，多个规则有关联关系 */
ofp_port_t actset_output; /* Output port in action set. 动作设置的出端口 */
/* L2, Order the same as in the Ethernet header! (64-bit aligned) */
/* 二层数据，这些值域以太网头顺序是一致的 */
struct eth_addr dl_dst; /* Ethernet destination address. */
struct eth_addr dl_src; /* Ethernet source address. */
ovs_be16 dl_type; /* Ethernet frame type. */
ovs_be16 vlan_tci; /* If 802.1Q, TCI | VLAN_CFI; otherwise 0. */
ovs_be32 mpls_lse[ROUND_UP(FLOW_MAX_MPLS_LABELS, 2)]; /* MPLS label stack
(with padding). */
/* L3 (64-bit aligned) */
/* 三层报文头元数据 */
ovs_be32 nw_src; /* IPv4 source address or ARP SPA. */
ovs_be32 nw_dst; /* IPv4 destination address or ARP TPA. */
struct in6_addr ipv6_src; /* IPv6 source address. */
struct in6_addr ipv6_dst; /* IPv6 destination address. */
ovs_be32 ipv6_label; /* IPv6 flow label. */
uint8_t nw_frag; /* FLOW_FRAG_* flags. */
uint8_t nw_tos; /* IP ToS (including DSCP and ECN). */
uint8_t nw_ttl; /* IP TTL/Hop Limit. */
uint8_t nw_proto; /* IP protocol or low 8 bits of ARP opcode. */
struct in6_addr nd_target; /* IPv6 neighbor discovery (ND) target. */
struct eth_addr arp_sha; /* ARP/ND source hardware address. */
struct eth_addr arp_tha; /* ARP/ND target hardware address. */
ovs_be16 tcp_flags; /* TCP flags. With L3 to avoid matching L4. */
ovs_be16 pad3; /* Pad to 64 bits. */
/* L4 (64-bit aligned) */
/* 四层报文数据 */
ovs_be16 tp_src; /* TCP/UDP/SCTP source port/ICMP type. 源端口 */
ovs_be16 tp_dst; /* TCP/UDP/SCTP destination port/ICMP code. 目的端口 */
ovs_be32 igmp_group_ip4; /* IGMP group IPv4 address. IGMP-IPV4组播地址
* Keep last for BUILD_ASSERT_DECL below. */
};struct miniflow
/* The number of value bits in an signed or unsigned integer TYPE:
*
* - _Bool has 1 value bit. bool类型的有一个bit
*
* - An N-bit unsigned integer type has N value bits. 一个N-BIT宽度整型数有n个值域
*
* - An N-bit signed integer type has N-1 value bits. 有符号的只有N-1个值域
* 该宏用于计算数据类型占用的bit数，bool类型占用1bit，无符号数使用字节数*每字节比特数，有符号数还需要减掉1个bit
* 符号位。
*/
#define TYPE_VALUE_BITS(TYPE) \
(TYPE_IS_BOOL(TYPE) ? 1 : sizeof(TYPE) * CHAR_BIT - TYPE_IS_SIGNED(TYPE))
/* The minimum or maximum value of a signed or unsigned integer TYPE. */
/* 根据类型获取其最小值：有符号数为最大值的负数减掉1，无符号数为0 */
#define TYPE_MINIMUM(TYPE) (TYPE_IS_SIGNED(TYPE) ? -TYPE_MAXIMUM(TYPE) - 1 : 0)
/* 根据类型获取对应类型的最大值，即该类型的1bit移动到最高位后减去1，再移动一位，然后加1
*/
#define TYPE_MAXIMUM(TYPE) \
((((TYPE)1 << (TYPE_VALUE_BITS(TYPE) - 1)) - 1) * 2 + 1)
typedef unsigned long long map_t; /* 是一个unsigned long long 8字节 */
#define MAP_T_BITS (sizeof(map_t) * CHAR_BIT) /* 一个占8*8=64个bit */
#define MAP_1 (map_t)1 /* 常数1，等价于0x1ull */
#define MAP_MAX TYPE_MAXIMUM(map_t)//类型最大值，即0xffffffffffffffffull
//判断map的第idx bit是否被设置了，设置了返回1，否则为0，idx从0开始
#define MAP_IS_SET(MAP, IDX) ((MAP) & (MAP_1 << (IDX)))
/* More efficient access to a map of single ullong. */
#define ULLONG_FOR_EACH_1(IDX, MAP) \
for (uint64_t map__ = (MAP); \
map__ && (((IDX) = raw_ctz(map__)), true); \
map__ = zero_rightmost_1bit(map__))
/* Iterate through the indices of all 1-bits in 'MAP'. */
/* 遍历map中每一个bit为1的位置，其中idx为1bit的位置 */
#define MAP_FOR_EACH_INDEX(IDX, MAP) \
ULLONG_FOR_EACH_1(IDX, MAP)
/* Returns X / Y, rounding up. X must be nonnegative to round correctly. */
/* 该宏定义的作用是计算X是Y的多少倍，并向上取整，比如X是5，Y是2，那么X除以Y=2.5，向上取整那么为3。
*/
#define DIV_ROUND_UP(X, Y) (((X) + ((Y) - 1)) / (Y))
/* 判断flow结构有多少个8字节 */
#define FLOW_U64S (sizeof(struct flow) / sizeof(uint64_t))
//判断需要多个FLOW_U64S是64的多少倍，取整
#define FLOWMAP_UNITS DIV_ROUND_UP(FLOW_U64S, MAP_T_BITS)
struct flowmap {
map_t bits[FLOWMAP_UNITS];
};
//该结构是一个压缩结构，一个bit代表flow结构中的8字节，一个map_t成员代表64*8个字节。
/* Compressed flow. */
/* A sparse representation of a "struct flow".
*
* A "struct flow" is fairly large and tends to be mostly zeros. Sparse
* representation has two advantages. First, it saves memory and, more
* importantly, minimizes the number of accessed cache lines. Second, it saves
* time when the goal is to iterate over only the nonzero parts of the struct.
*
* The map member hold one bit for each uint64_t in a "struct flow". Each
* 0-bit indicates that the corresponding uint64_t is zero, each 1-bit that it
* *may* be nonzero (see below how this applies to minimasks).
*
* The values indicated by 'map' always follow the miniflow in memory. The
* user of the miniflow is responsible for always having enough storage after
* the struct miniflow corresponding to the number of 1-bits in maps.
*
* Elements in values array are allowed to be zero. This is useful for "struct
* minimatch", for which ensuring that the miniflow and minimask members have
* same maps allows optimization. This allowance applies only to a miniflow
* that is not a mask. That is, a minimask may NOT have zero elements in its
* values.
*
* A miniflow is always dynamically allocated so that the maps are followed by
* at least as many elements as there are 1-bits in maps. */
struct miniflow {
struct flowmap map;
/* Followed by:
* uint64_t values[n];
* where 'n' is miniflow_n_values(miniflow). */
};
//一个flow结构非常大，非常耗费内存，所以使用miniflow这个结构进行压缩存储。该结构分为两部分：
//struct flowmap map;是bit数组，使用其中的bit表示flow中哪个8字节存在有效数据，flow中占多少个8字节，那么
//就需要map中多个个bit，并且按照64bit向上取整。
//第二部分是有效数据，有效数据动态分配，根据struct flowmap map;中1bit数个数进行分配，大小为bit数*8字节，该
//部分直接跟在map后面。
函数
FLOWMAP_SET
//计算对应域在flow中的字节偏移，然后转换成8字节的倍数
#define FLOW_U64_OFFSET(FIELD) \
(offsetof(struct flow, FIELD) / sizeof(uint64_t))
/* Number of 64-bit units spanned by a 'FIELD'. */
/* 需要设置的域按照8字节对齐后，跨越了多少个8字节(起始和结束地址对8字节对齐后的总大小是多少个8字节) */
#define FLOW_U64_SIZE(FIELD) \
DIV_ROUND_UP(FLOW_U64_OFFREM(FIELD) + MEMBER_SIZEOF(struct flow, FIELD), \
sizeof(uint64_t))
/* Set the 'n_bits' consecutive bits in 'fm', starting at bit 'idx'.
* 'n_bits' can be at most MAP_T_BITS.
* fm为miniflow的map成员，idx是8字节起始偏移，nbits为多少个8字节bit需要设置。
*/
static inline void
flowmap_set(struct flowmap *fm, size_t idx, unsigned int n_bits)
{
map_t n_bits_mask = (MAP_1 << n_bits) - 1;//取掩码
size_t unit = idx / MAP_T_BITS;//计算位于第几个64bit
idx %= MAP_T_BITS;//本64bit中的偏移
//设置位
fm->bits[unit] |= n_bits_mask << idx;
/* The seemingly unnecessary bounds check on 'unit' is a workaround for a
* false-positive array out of bounds error by GCC 4.9. */
/* 对于跨越两个64bit的位进行调整，比如有10个bit需要设置，但是起始的bit为62，也就是
** 本64bit fm->bits[unit]只能存储两位即62和63，剩下8位需要设置到下一个64bit位置
** 即fm->bits[unit+1]
** 判断条件unit + 1 < FLOWMAP_UNITS是防止越界，idx + n_bits > MAP_T_BITS表示确实跨越了
** 两个64bit域
*/
if (unit + 1 < FLOWMAP_UNITS && idx + n_bits > MAP_T_BITS) {
/* 'MAP_T_BITS - idx' bits were set on 'unit', set the remaining
* bits from the next unit. */
fm->bits[unit + 1] |= n_bits_mask >> (MAP_T_BITS - idx);
}
}
//将flow中的有效域在miniflow中的map中的对应bit设置上。
#define FLOWMAP_SET(FM, FIELD) \
flowmap_set(FM, FLOW_U64_OFFSET(FIELD), FLOW_U64_SIZE(FIELD))
#define miniflow_set_map(MF, OFS) \
{ \
ASSERT_FLOWMAP_NOT_SET(&MF.map, (OFS)); \
flowmap_set(&MF.map, (OFS), 1); \
}
//OFS是field在flow中的偏移，OFS / 8表示该field在第几个8字节中
#define miniflow_push_uint32_(MF, OFS, VALUE) \
{ \
MINIFLOW_ASSERT(MF.data < MF.end); \
//在8字节前四字节。直接设置对应的8字节bit位即可 \
if ((OFS) % 8 == 0) { \
miniflow_set_map(MF, OFS / 8); \
*(uint32_t *)MF.data = VALUE; \
} else if ((OFS) % 8 == 4) { \
miniflow_assert_in_map(MF, OFS / 8); \
*((uint32_t *)MF.data + 1) = VALUE; \//在8字节后四字节
MF.data++; \
} \
}
//将一个32bit的域设置到miniflow中，包括设置map和value
#define miniflow_push_be32(MF, FIELD, VALUE) \
miniflow_push_be32_(MF, offsetof(struct flow, FIELD), VALUE)miniflow_extract
该函数用于将报文内容提取出来构建miniflow结构。
/* Caller is responsible for initializing 'dst' with enough storage for
* FLOW_U64S * 8 bytes. */
void
miniflow_extract(struct dp_packet *packet, struct miniflow *dst)
{
const struct pkt_metadata *md = &packet->md;/* 报文元数据 */
const void *data = dp_packet_data(packet);/* 获取起始位置 */
size_t size = dp_packet_size(packet);/* 获取报文大小 */
uint64_t *values = miniflow_values(dst);/* 获取掩码的起始位置 */
struct mf_ctx mf = { FLOWMAP_EMPTY_INITIALIZER, values,
values + FLOW_U64S };
const char *l2;
ovs_be16 dl_type;
uint8_t nw_frag, nw_tos, nw_ttl, nw_proto;
/* Metadata. */
if (flow_tnl_dst_is_set(&md->tunnel)) {/* 判断隧道的目的mac地址是否已经设置了，没有设置说明隧道还没有用，不需要提取 */
miniflow_push_words(mf, tunnel, &md->tunnel,
offsetof(struct flow_tnl, metadata) /
sizeof(uint64_t));
if (!(md->tunnel.flags & FLOW_TNL_F_UDPIF)) {
if (md->tunnel.metadata.present.map) {
miniflow_push_words(mf, tunnel.metadata, &md->tunnel.metadata,
sizeof md->tunnel.metadata /
sizeof(uint64_t));
}
} else {
if (md->tunnel.metadata.present.len) {
miniflow_push_words(mf, tunnel.metadata.present,
&md->tunnel.metadata.present, 1);
miniflow_push_words(mf, tunnel.metadata.opts.gnv,
md->tunnel.metadata.opts.gnv,
DIV_ROUND_UP(md->tunnel.metadata.present.len,
sizeof(uint64_t)));
}
}
}
if (md->skb_priority || md->pkt_mark) {
miniflow_push_uint32(mf, skb_priority, md->skb_priority);
miniflow_push_uint32(mf, pkt_mark, md->pkt_mark);
}
miniflow_push_uint32(mf, dp_hash, md->dp_hash);
miniflow_push_uint32(mf, in_port, odp_to_u32(md->in_port.odp_port));
if (md->recirc_id || md->ct_state) {
miniflow_push_uint32(mf, recirc_id, md->recirc_id);
miniflow_push_uint16(mf, ct_state, md->ct_state);
miniflow_push_uint16(mf, ct_zone, md->ct_zone);
}
if (md->ct_state) {
miniflow_push_uint32(mf, ct_mark, md->ct_mark);
miniflow_pad_to_64(mf, ct_mark);
if (!ovs_u128_is_zero(md->ct_label)) {
miniflow_push_words(mf, ct_label, &md->ct_label,
sizeof md->ct_label / sizeof(uint64_t));
}
}
/* Initialize packet's layer pointer and offsets. */
l2 = data;
dp_packet_reset_offsets(packet);
/* Must have full Ethernet header to proceed. */
if (OVS_UNLIKELY(size < sizeof(struct eth_header))) {
goto out;
} else {
ovs_be16 vlan_tci;
/* Link layer. */
ASSERT_SEQUENTIAL(dl_dst, dl_src);
miniflow_push_macs(mf, dl_dst, data);
/* dl_type, vlan_tci. */
vlan_tci = parse_vlan(&data, &size);
dl_type = parse_ethertype(&data, &size);
miniflow_push_be16(mf, dl_type, dl_type);
miniflow_push_be16(mf, vlan_tci, vlan_tci);
}
/* Parse mpls. 如果是mpls报文，提取后，后面的内容将不在提取*/
if (OVS_UNLIKELY(eth_type_mpls(dl_type))) {
int count;
const void *mpls = data;
packet->l2_5_ofs = (char *)data - l2;
count = parse_mpls(&data, &size);
miniflow_push_words_32(mf, mpls_lse, mpls, count);
}
/* Network layer. */
packet->l3_ofs = (char *)data - l2;
//ip报文，去取网络层信息,从这里可以看出，ovs暂时只支持IP,IPV6,ARP,RARP报文
nw_frag = 0;
if (OVS_LIKELY(dl_type == htons(ETH_TYPE_IP))) {
const struct ip_header *nh = data;
int ip_len;
uint16_t tot_len;
if (OVS_UNLIKELY(size < IP_HEADER_LEN)) {
goto out;
}
ip_len = IP_IHL(nh->ip_ihl_ver) * 4;
if (OVS_UNLIKELY(ip_len < IP_HEADER_LEN)) {
goto out;
}
if (OVS_UNLIKELY(size < ip_len)) {
goto out;
}
tot_len = ntohs(nh->ip_tot_len);
if (OVS_UNLIKELY(tot_len > size || ip_len > tot_len)) {
goto out;
}
if (OVS_UNLIKELY(size - tot_len > UINT8_MAX)) {
goto out;
}
dp_packet_set_l2_pad_size(packet, size - tot_len);
size = tot_len; /* Never pull padding. */
/* Push both source and destination address at once. */
miniflow_push_words(mf, nw_src, &nh->ip_src, 1);
miniflow_push_be32(mf, ipv6_label, 0); /* Padding for IPv4. */
nw_tos = nh->ip_tos;
nw_ttl = nh->ip_ttl;
nw_proto = nh->ip_proto;
if (OVS_UNLIKELY(IP_IS_FRAGMENT(nh->ip_frag_off))) {
nw_frag = FLOW_NW_FRAG_ANY;
if (nh->ip_frag_off & htons(IP_FRAG_OFF_MASK)) {
nw_frag |= FLOW_NW_FRAG_LATER;
}
}
data_pull(&data, &size, ip_len);
} else if (dl_type == htons(ETH_TYPE_IPV6)) {
const struct ovs_16aligned_ip6_hdr *nh;
ovs_be32 tc_flow;
uint16_t plen;
if (OVS_UNLIKELY(size < sizeof *nh)) {
goto out;
}
nh = data_pull(&data, &size, sizeof *nh);
plen = ntohs(nh->ip6_plen);
if (OVS_UNLIKELY(plen > size)) {
goto out;
}
/* Jumbo Payload option not supported yet. */
if (OVS_UNLIKELY(size - plen > UINT8_MAX)) {
goto out;
}
dp_packet_set_l2_pad_size(packet, size - plen);
size = plen; /* Never pull padding. */
miniflow_push_words(mf, ipv6_src, &nh->ip6_src,
sizeof nh->ip6_src / 8);
miniflow_push_words(mf, ipv6_dst, &nh->ip6_dst,
sizeof nh->ip6_dst / 8);
tc_flow = get_16aligned_be32(&nh->ip6_flow);
{
ovs_be32 label = tc_flow & htonl(IPV6_LABEL_MASK);
miniflow_push_be32(mf, ipv6_label, label);
}
nw_tos = ntohl(tc_flow) >> 20;
nw_ttl = nh->ip6_hlim;
nw_proto = nh->ip6_nxt;
if (!parse_ipv6_ext_hdrs__(&data, &size, &nw_proto, &nw_frag)) {
goto out;
}
} else {
if (dl_type == htons(ETH_TYPE_ARP) ||
dl_type == htons(ETH_TYPE_RARP)) {
struct eth_addr arp_buf[2];
const struct arp_eth_header *arp = (const struct arp_eth_header *)
data_try_pull(&data, &size, ARP_ETH_HEADER_LEN);
if (OVS_LIKELY(arp) && OVS_LIKELY(arp->ar_hrd == htons(1))
&& OVS_LIKELY(arp->ar_pro == htons(ETH_TYPE_IP))
&& OVS_LIKELY(arp->ar_hln == ETH_ADDR_LEN)
&& OVS_LIKELY(arp->ar_pln == 4)) {
miniflow_push_be32(mf, nw_src,
get_16aligned_be32(&arp->ar_spa));
miniflow_push_be32(mf, nw_dst,
get_16aligned_be32(&arp->ar_tpa));
/* We only match on the lower 8 bits of the opcode. */
if (OVS_LIKELY(ntohs(arp->ar_op) <= 0xff)) {
miniflow_push_be32(mf, ipv6_label, 0); /* Pad with ARP. */
miniflow_push_be32(mf, nw_frag, htonl(ntohs(arp->ar_op)));
}
/* Must be adjacent. */
ASSERT_SEQUENTIAL(arp_sha, arp_tha);
arp_buf[0] = arp->ar_sha;
arp_buf[1] = arp->ar_tha;
miniflow_push_macs(mf, arp_sha, arp_buf);
miniflow_pad_to_64(mf, arp_tha);
}
}
goto out;
}
packet->l4_ofs = (char *)data - l2;
miniflow_push_be32(mf, nw_frag,
BYTES_TO_BE32(nw_frag, nw_tos, nw_ttl, nw_proto));
//提取传输层，从这里可以看出，ovs暂时支持传输层协议有TCP,UDP,SCTP,ICMP,ICMPV6
if (OVS_LIKELY(!(nw_frag & FLOW_NW_FRAG_LATER))) {
if (OVS_LIKELY(nw_proto == IPPROTO_TCP)) {
if (OVS_LIKELY(size >= TCP_HEADER_LEN)) {
const struct tcp_header *tcp = data;
miniflow_push_be32(mf, arp_tha.ea[2], 0);
miniflow_push_be32(mf, tcp_flags,
TCP_FLAGS_BE32(tcp->tcp_ctl));
miniflow_push_be16(mf, tp_src, tcp->tcp_src);
miniflow_push_be16(mf, tp_dst, tcp->tcp_dst);
miniflow_pad_to_64(mf, tp_dst);
}
} else if (OVS_LIKELY(nw_proto == IPPROTO_UDP)) {
if (OVS_LIKELY(size >= UDP_HEADER_LEN)) {
const struct udp_header *udp = data;
miniflow_push_be16(mf, tp_src, udp->udp_src);
miniflow_push_be16(mf, tp_dst, udp->udp_dst);
miniflow_pad_to_64(mf, tp_dst);
}
} else if (OVS_LIKELY(nw_proto == IPPROTO_SCTP)) {
if (OVS_LIKELY(size >= SCTP_HEADER_LEN)) {
const struct sctp_header *sctp = data;
miniflow_push_be16(mf, tp_src, sctp->sctp_src);
miniflow_push_be16(mf, tp_dst, sctp->sctp_dst);
miniflow_pad_to_64(mf, tp_dst);
}
} else if (OVS_LIKELY(nw_proto == IPPROTO_ICMP)) {
if (OVS_LIKELY(size >= ICMP_HEADER_LEN)) {
const struct icmp_header *icmp = data;
miniflow_push_be16(mf, tp_src, htons(icmp->icmp_type));
miniflow_push_be16(mf, tp_dst, htons(icmp->icmp_code));
miniflow_pad_to_64(mf, tp_dst);
}
} else if (OVS_LIKELY(nw_proto == IPPROTO_IGMP)) {
if (OVS_LIKELY(size >= IGMP_HEADER_LEN)) {
const struct igmp_header *igmp = data;
miniflow_push_be16(mf, tp_src, htons(igmp->igmp_type));
miniflow_push_be16(mf, tp_dst, htons(igmp->igmp_code));
miniflow_push_be32(mf, igmp_group_ip4,
get_16aligned_be32(&igmp->group));
}
} else if (OVS_LIKELY(nw_proto == IPPROTO_ICMPV6)) {
if (OVS_LIKELY(size >= sizeof(struct icmp6_hdr))) {
const struct in6_addr *nd_target = NULL;
struct eth_addr arp_buf[2] = { { { { 0 } } } };
const struct icmp6_hdr *icmp = data_pull(&data, &size,
sizeof *icmp);
parse_icmpv6(&data, &size, icmp, &nd_target, arp_buf);
if (nd_target) {
miniflow_push_words(mf, nd_target, nd_target,
sizeof *nd_target / sizeof(uint64_t));
}
miniflow_push_macs(mf, arp_sha, arp_buf);
miniflow_pad_to_64(mf, arp_tha);
miniflow_push_be16(mf, tp_src, htons(icmp->icmp6_type));
miniflow_push_be16(mf, tp_dst, htons(icmp->icmp6_code));
miniflow_pad_to_64(mf, tp_dst);
}
}
}
out:
dst->map = mf.map;
}miniflow_expand
该函数用于将miniflow还原成flow。
/* Perform a bitwise OR of miniflow 'src' flow data specified in 'subset' with
* the equivalent fields in 'dst', storing the result in 'dst'. 'subset' must
* be a subset of 'src's map. */
static inline void
flow_union_with_miniflow_subset(struct flow *dst, const struct miniflow *src,
struct flowmap subset)
{
uint64_t *dst_u64 = (uint64_t *) dst;/* 将dst强制类型转换为8字节类型的指针 */
const uint64_t *p = miniflow_get_values(src);/* 指向miniflow的data部分 */
map_t map;
FLOWMAP_FOR_EACH_MAP (map, subset) {/* subset为src->map，这里是遍历map数组的每一个元素，一个元素是8字节 */
size_t idx;
MAP_FOR_EACH_INDEX(idx, map) {/* 遍历64个bit，如果该bit为1，则进行赋值，idx为8字节偏移 */
dst_u64[idx] |= *p++;/* 进行或赋值 */
}
/* 指向下一个填充域，MAP_T_BITS为64，即一个MAP_FOR_EACH_INDEX循环处理64*8字节 */
dst_u64 += MAP_T_BITS;
}
}
/* Perform a bitwise OR of miniflow 'src' flow data with the equivalent
* fields in 'dst', storing the result in 'dst'.
* 通过按位或进行flow的等价填充
*/
static inline void
flow_union_with_miniflow(struct flow *dst, const struct miniflow *src)
{
flow_union_with_miniflow_subset(dst, src, src->map);
}
/* Initializes 'dst' as a copy of 'src'. */
/* 将src还原成flow的dst */
void
miniflow_expand(const struct miniflow *src, struct flow *dst)
{
memset(dst, 0, sizeof *dst);/* 现将dst清零 */
flow_union_with_miniflow(dst, src);
}
ubuntu
**粗体** _斜体_ [链接](http://example.com) `代码` - 列表 > 引用。你还可以使用@来通知其他用户。