聊聊kingbus的binlog_server_handler.go

序

本文主要研究一下kingbus的binlog_server_handler.go

StartBinlogServer

kingbus/api/binlog_server_handler.go

//StartBinlogServer implements start a binlog server
func (h *BinlogServerHandler) StartBinlogServer(echoCtx echo.Context) error {
    h.l.Lock()
    defer h.l.Unlock()

    var args config.BinlogServerConfig
    var err error

    defer func() {
        if err != nil {
            log.Log.Errorf("StartBinlogServer error,err: %s", err)
            echoCtx.JSON(http.StatusInternalServerError, utils.NewResp().SetError(err.Error()))
        }
    }()

    err = echoCtx.Bind(&args)
    if err != nil {
        return err
    }
    kingbusIP := h.svr.GetIP()
    //check args
    err = args.Check(kingbusIP)
    if err != nil {
        return err
    }
    //start syncer server
    err = h.svr.StartServer(config.BinlogServerType, &args)
    if err != nil {
        log.Log.Errorf("start server error,err:%s,args:%v", err, args)
        return err
    }

    return echoCtx.JSON(http.StatusOK, utils.NewResp().SetData(""))
}

• StartBinlogServer方法主要是通过h.svr.StartServer(config.BinlogServerType, &args)来启动binlog server

StartServer

kingbus/server/server.go

//StartServer start sub servers:syncer server or binlog master server
func (s *KingbusServer) StartServer(svrType config.SubServerType, args interface{}) error {
    var err error
    switch svrType {
    case config.SyncerServerType:
        if s.IsSyncerStarted() {
            return ErrStarted
        }
        syncerArgs, ok := args.(*config.SyncerArgs)
        if !ok {
            log.Log.Errorf("StartServer args is illegal,args:%v", args)
            return ErrArgs
        }
        err = s.startSyncerServer(syncerArgs)
        if err != nil {
            log.Log.Errorf("startSyncerServer error,err:%s,args:%v", err, *syncerArgs)
            return ErrArgs
        }
        //start to propose binlog event to raft cluster
        s.StartProposeBinlog(s.syncer.ctx)
        log.Log.Debugf("start syncer,and propose!!!")
        return nil
    case config.BinlogServerType:
        if s.IsBinlogServerStarted() {
            return ErrStarted
        }
        masterArgs, ok := args.(*config.BinlogServerConfig)
        if !ok {
            log.Log.Errorf("StartServer args is illegal,args:%v", args)
            return ErrArgs
        }
        err = s.startMasterServer(masterArgs)
        if err != nil {
            log.Log.Errorf("startMasterServer error,err:%s,args:%v", err, *masterArgs)
            return ErrArgs
        }
        return nil
    default:
        log.Log.Fatalf("StartServer:server type not support,serverType:%v", svrType)
    }
    return nil
}

• StartServer方法根据svrType参数来启动不同的server，若是config.SyncerServerType则启动的是SyncerServer，若是config.BinlogServerType则启动的是BinlogServer

StopBinlogServer

kingbus/api/binlog_server_handler.go

//StopBinlogServer implements stop binlog server
func (h *BinlogServerHandler) StopBinlogServer(echoCtx echo.Context) error {
    h.l.Lock()
    defer h.l.Unlock()
    h.svr.StopServer(config.BinlogServerType)
    return echoCtx.JSON(http.StatusOK, utils.NewResp().SetData(""))
}

• StopBinlogServer方法通过h.svr.StopServer(config.BinlogServerType)来关闭binlog server

StopServer

kingbus/server/server.go

//StopServer stop sub server
func (s *KingbusServer) StopServer(svrType config.SubServerType) {
    switch svrType {
    case config.SyncerServerType:
        if s.IsSyncerStarted() {
            s.syncer.Stop()
        }
    case config.BinlogServerType:
        if s.IsBinlogServerStarted() {
            s.master.Stop()
        }
    default:
        log.Log.Fatalf("StopServer:server type not support,serverType:%v", svrType)
    }
}

• StopServer方法根据svrType参数来关闭不同的server，若是config.SyncerServerType则关闭的是SyncerServer，若是config.BinlogServerType则关闭的是BinlogServer

GetBinlogServerStatus

kingbus/api/binlog_server_handler.go

//GetBinlogServerStatus implements get binlog server status in the runtime state
func (h *BinlogServerHandler) GetBinlogServerStatus(echoCtx echo.Context) error {
    h.l.Lock()
    defer h.l.Unlock()

    status := h.svr.GetServerStatus(config.BinlogServerType)
    if masterStatus, ok := status.(*config.BinlogServerStatus); ok {
        return echoCtx.JSON(http.StatusOK, utils.NewResp().SetData(masterStatus))
    }
    return echoCtx.JSON(http.StatusInternalServerError, utils.NewResp().SetError("no resp"))
}

• GetBinlogServerStatus方法通过h.svr.GetServerStatus(config.BinlogServerType)来获取server status

GetServerStatus

//GetServerStatus get the sub server status
func (s *KingbusServer) GetServerStatus(svrType config.SubServerType) interface{} {
    switch svrType {
    case config.SyncerServerType:
        var syncerStatus config.SyncerStatus
        if s.IsSyncerStarted() {
            cfg := s.syncer.cfg
            syncerStatus.MysqlAddr = fmt.Sprintf("%s:%d", cfg.Host, cfg.Port)
            syncerStatus.MysqlUser = cfg.User
            syncerStatus.MysqlPassword = cfg.Password
            syncerStatus.SemiSync = cfg.SemiSyncEnabled

            syncerStatus.Status = config.ServerRunningStatus
            syncerStatus.CurrentGtid = s.CurrentGtidStr()
            syncerStatus.LastBinlogFile = s.LastBinlogFile()
            syncerStatus.LastFilePosition = s.LastFilePosition()
            syncerStatus.ExecutedGtidSet = s.ExecutedGtidSetStr()

            purgedGtids, err := s.store.GetGtidSet("mysql", storage.GtidPurgedKey)
            if err != nil {
                log.Log.Fatalf("get PurgedGtidSet error,err:%s", err)
            }
            syncerStatus.PurgedGtidSet = purgedGtids.String()
        } else {
            syncerStatus.Status = config.ServerStoppedStatus
        }
        return &syncerStatus
    case config.BinlogServerType:
        var status config.BinlogServerStatus
        if s.IsBinlogServerStarted() {
            cfg := s.master.cfg
            status.Addr = cfg.Addr
            status.User = cfg.User
            status.Password = cfg.Password

            status.Slaves = make([]*mysql.Slave, 0, 2)
            slaves := s.master.GetSlaves()
            for _, s := range slaves {
                status.Slaves = append(status.Slaves, s)
            }
            status.CurrentGtid = s.CurrentGtidStr()
            status.LastBinlogFile = s.LastBinlogFile()
            status.LastFilePosition = s.LastFilePosition()
            status.ExecutedGtidSet = s.ExecutedGtidSetStr()

            purgedGtids, err := s.store.GetGtidSet("mysql", storage.GtidPurgedKey)
            if err != nil {
                log.Log.Fatalf("get PurgedGtidSet error,err:%s", err)
            }
            status.PurgedGtidSet = purgedGtids.String()
            status.Status = config.ServerRunningStatus
        } else {
            status.Status = config.ServerStoppedStatus
        }
        return &status
    default:
        log.Log.Fatalf("StopServer:server type not support,serverType:%v", svrType)
    }
    return nil
}

• GetServerStatus方法根据svrType参数来获取不同的status，若是config.SyncerServerType则获取的是SyncerStatus，若是config.BinlogServerType则获取的是BinlogServerStatus

小结

kingbus的binlog_server_handler提供了StartBinlogServer、StopBinlogServer、GetBinlogServerStatus，他们均委托给了server.go的对应方法

doc

• binlog_server_handler