NI IMAQ Error Code 一览表

-1074397183

IMG_ERR_NCAP

NI-IMAQ cannot perform the requested operation.

-1074397182

IMG_ERR_OVRN

Too many interfaces open.

-1074397181

IMG_ERR_EMEM

Not enough memory to perform the operation.

-1074397180

IMG_ERR_OSER

Operating system error occurred.

-1074397179

IMG_ERR_PAR1

Function-specific; see function description.

-1074397178

IMG_ERR_PAR2

Function-specific; see function description.

-1074397177

IMG_ERR_PAR3

Function-specific; see function description.

-1074397176

IMG_ERR_PAR4

Function-specific; see function description.

-1074397175

IMG_ERR_PAR5

Function-specific; see function description.

-1074397174

IMG_ERR_PAR6

Function-specific; see function description.

-1074397173

IMG_ERR_PAR7

Function-specific; see function description.

-1074397172

IMG_ERR_MXBF

Too many buffers already allocated.

-1074397171

IMG_ERR_DLLE

DLL internal error; bad logic state.

-1074397170

IMG_ERR_BSIZ

Buffer size used is too small for minimum acquisition frame.

-1074397169

IMG_ERR_MXBI

Exhausted buffer IDs.

-1074397168

IMG_ERR_ELCK

Operating system unable to lock the requested amount of memory.

-1074397167

IMG_ERR_DISE

Error releasing the image buffer.

-1074397166

IMG_ERR_BBUF

Bad buffer pointer in list.

-1074397165

IMG_ERR_NLCK

Buffer list is not locked for this acquisition.

-1074397164

IMG_ERR_NCAM

No camera defined for this channel.

-1074397163

IMG_ERR_BINT

The passed in interface or session is invalid.

-1074397162

IMG_ERR_BROW

The bytes per row value is less than region of interest.

-1074397161

IMG_ERR_BROI

Region of interest is larger than the acquisition area.

-1074397160

IMG_ERR_BCMF

Camera file is missing or corrupted.

-1074397159

IMG_ERR_NVBL

The hardware is incapable of performing the requested action.

-1074397158

IMG_ERR_NCFG

No buffers configured for session.

-1074397157

IMG_ERR_BBLF

Buffer list does not contain a valid final command.

-1074397156

IMG_ERR_BBLE

Buffer list contains an invalid command.

-1074397155

IMG_ERR_BBLB

One or more of the buffers in the buffer list is not configured.

-1074397154

IMG_ERR_NAIP

No acquisition in progress.

-1074397153

IMG_ERR_VLCK

Cannot detect recognizable video source.

-1074397152

IMG_ERR_BDMA

Bad DMA transfer.

-1074397151

IMG_ERR_AIOP

Cannot perform request; acquisition currently in progress.

-1074397150

IMG_ERR_TIMO

A timeout error occurred while waiting for the specified event. If waiting for an image, verify that all video data is acquired within the timeout period. If waiting for a signal, verify that the signal assertion occurs within the timeout period.

-1074397149

IMG_ERR_NBUF

No buffers available; too early in acquisition.

-1074397148

IMG_ERR_ZBUF

The buffer has a size of zero.

-1074397147

IMG_ERR_HLPR

Parameter value set lower than valid range.

-1074397146

IMG_ERR_BTRG

Trigger loopback problem; cannot drive with action enabled.

-1074397145

IMG_ERR_NINF

No interface found.

-1074397144

IMG_ERR_NDLL

Unable to load DLL.

-1074397143

IMG_ERR_NFNC

Unable to find API function in DLL.

-1074397142

IMG_ERR_NOSR

Unable to allocate system resources.

-1074397141

IMG_ERR_BTAC

No trigger action; acquisition will time out.

-1074397140

IMG_ERR_FIFO

FIFO overflow caused acquisition to halt.

-1074397139

IMG_ERR_MLCK

Operating system denied request to lock down memory.

-1074397138

IMG_ERR_ILCK

Interface locked.

-1074397137

IMG_ERR_NEPK

No pixel clock detected from camera.

-1074397136

IMG_ERR_SCLM

Field scaling mode not supported.

-1074397135

IMG_ERR_SCC1

Channel not set to 1 when using StillColor RGB acquisition.

-1074397134

IMG_ERR_SMALLALLOC

Error during small buffer allocation.

-1074397133

IMG_ERR_ALLOC

Error during large buffer allocation.

-1074397132

IMG_ERR_BADCAMTYPE

This camera type is not supported by this hardware.

-1074397131

IMG_ERR_BADPIXTYPE

Camera not supported; must be an 8-bit camera.

-1074397130

IMG_ERR_BADCAMPARAM

Bad camera parameter in configuration file.

-1074397129

IMG_ERR_PALKEYDTCT

Unable to recognize color component in PAL signal.

-1074397128

IMG_ERR_BFRQ

Bad clock frequency.

-1074397127

IMG_ERR_BITP

Bad interface type.

-1074397126

IMG_ERR_HWNC

Hardware not capable of supporting this operation.

-1074397125

IMG_ERR_SERIAL

Serial port error.

-1074397124

IMG_ERR_MXPI

No more pulse IDs are available. Dispose of an existing pulse first.

-1074397123

IMG_ERR_BPID

Bad pulse ID.

-1074397122

IMG_ERR_NEVR

DLL internal error; bad logic state.

-1074397121

IMG_ERR_SERIAL_TIMO

Unable to perform the requested serial operation within the timeout period.

-1074397120

IMG_ERR_PG_TOO_MANY

Too many pattern generation transitions defined.

-1074397119

IMG_ERR_PG_BAD_TRANS

Bad pattern generation transition time.

-1074397118

IMG_ERR_PLNS

Pulse not started.

-1074397117

IMG_ERR_BPMD

Bad pulse mode.

-1074397116

IMG_ERR_NSAT

This attribute cannot be set.

-1074397115

IMG_ERR_HYBRID

Cannot mix system and onboard memory buffers.

-1074397114

IMG_ERR_BADFILFMT

Pixel depth not supported with this file format.

-1074397113

IMG_ERR_BADFILEXT

File extension is not supported.

-1074397112

IMG_ERR_NRTSI

Too many RTSI triggers mapped; you can use only four RTSI lines at once.

-1074397111

IMG_ERR_MXTRG

Exhausted trigger resources.

-1074397110

IMG_ERR_MXRC

Exhausted resources.

-1074397109

IMG_ERR_OOR

Parameter out of range.

-1074397108

IMG_ERR_NPROG

FPGA not programmed.

-1074397107

IMG_ERR_NEOM

Not enough onboard memory to perform the operation.

-1074397106

IMG_ERR_BDTYPE

Bad display type; buffer cannot be displayed with imgPlot.

-1074397105

IMG_ERR_THRDACCDEN

Thread denied access to function.

-1074397104

IMG_ERR_BADFILWRT

Could not write the file.

-1074397103

IMG_ERR_AEXM

This buffer is currently protected. Release it to allow new data to be written.

-1074397102

IMG_ERR_BAD_LUT_TYPE

The LUT type is invalid.

-1074397101

IMG_ERR_ATTRIBUTE_NOT_READABLE

The selected attribute is not readable.

-1074397100

IMG_ERR_BOARD_NOT_SUPPORTED

This version of NI-IMAQ does not support this device.

-1074397099

IMG_ERR_BAD_FRAME_FIELD

The value of IMG_ATTR_FRAME_FIELD is invalid.

-1074397098

IMG_ERR_INVALID_ATTRIBUTE

The requested attribute is invalid.

-1074397097

IMG_ERR_BAD_LINE_MAP

The physical data lines are incorrectly mapped to bit values.

-1074397095

IMG_ERR_BAD_CHANNEL

The requested channel is invalid for this device.

-1074397094

IMG_ERR_BAD_CHROMA_FILTER

The value of IMG_ATTR_CHROMA_FILTER is invalid.

-1074397093

IMG_ERR_BAD_SCALE

The value of IMG_ATTR_HSCALE or IMG_ATTR_VSCALE is invalid.

-1074397091

IMG_ERR_BAD_TRIGGER_MODE

The requested triggering mode is invalid.

-1074397090

IMG_ERR_BAD_CLAMP_START

The clamp start value is invalid.

-1074397089

IMG_ERR_BAD_CLAMP_STOP

The requested clamp stop value is invalid.

-1074397088

IMG_ERR_BAD_BRIGHTNESS

The requested brightness level is out of range.

-1074397087

IMG_ERR_BAD_CONTRAST

The requested contrast level is out of range.

-1074397086

IMG_ERR_BAD_SATURATION

The requested saturation level is out of range.

-1074397085

IMG_ERR_BAD_TINT

The requested tint level is out of range.

-1074397084

IMG_ERR_BAD_HUE_OFF_ANGLE

The requested hue offset angle is out of range.

-1074397083

IMG_ERR_BAD_ACQUIRE_FIELD

The field requested to be acquired is invalid.

-1074397082

IMG_ERR_BAD_LUMA_BANDWIDTH

The requested luma bandwidth value is invalid.

-1074397081

IMG_ERR_BAD_LUMA_COMB

The requested luma comb setting is invalid.

-1074397080

IMG_ERR_BAD_CHROMA_PROCESS

The requested chroma processing value is invalid.

-1074397079

IMG_ERR_BAD_CHROMA_BANDWIDTH

The requested chroma bandwidth value is invalid.

-1074397078

IMG_ERR_BAD_CHROMA_COMB

The requested chroma comb setting value is invalid.

-1074397077

IMG_ERR_BAD_RGB_CORING

The requested minimum level of saturation (coring) for the RGB color space is invalid.

-1074397076

IMG_ERR_BAD_HUE_REPLACE_VALUE

The requested HSL hue replacement value is out of range.

-1074397075

IMG_ERR_BAD_RED_GAIN

The requested red gain value is out of range.

-1074397074

IMG_ERR_BAD_GREEN_GAIN

The requested green gain value is out of range.

-1074397073

IMG_ERR_BAD_BLUE_GAIN

The requested blue gain value is out of range.

-1074397072

IMG_ERR_BAD_START_FIELD

The requested start field value is invalid.

-1074397071

IMG_ERR_BAD_TAP_DIRECTION

The direction of the tap scan is invalid.

-1074397070

IMG_ERR_BAD_MAX_IMAGE_RECT

The maximum image rectangle value is invalid.

-1074397069

IMG_ERR_BAD_TAP_TYPE

The tap configuration is invalid.

-1074397068

IMG_ERR_BAD_SYNC_RECT

The synchronization rectangle is invalid.

-1074397067

IMG_ERR_BAD_ACQWINDOW_RECT

The requested acquisition window is invalid.

-1074397066

IMG_ERR_BAD_HSL_CORING

The requested minimum level of saturation (coring) for the HSL color space is out of range.

-1074397065

IMG_ERR_BAD_TAP_0_VALID_RECT

The rectangle defined for Tap 0 is invalid.

-1074397064

IMG_ERR_BAD_TAP_1_VALID_RECT

The rectangle defined for Tap 1 is invalid.

-1074397063

IMG_ERR_BAD_TAP_2_VALID_RECT

The rectangle defined for Tap 2 is invalid.

-1074397062

IMG_ERR_BAD_TAP_3_VALID_RECT

The rectangle defined for Tap 3 is invalid.

-1074397061

IMG_ERR_BAD_TAP_RECT

The tap rectangle is invalid.

-1074397060

IMG_ERR_BAD_NUM_TAPS

The number of taps is invalid.

-1074397059

IMG_ERR_BAD_TAP_NUM

The tap number is invalid.

-1074397058

IMG_ERR_BAD_QUAD_NUM

The scarab quadrant number is invalid.

-1074397057

IMG_ERR_BAD_NUM_DATA_LINES

The number of data lines requested is invalid for this image acquisition device.

-1074397056

IMG_ERR_BAD_BITS_PER_COMPONENT

The bits-per-component value is invalid.

-1074397055

IMG_ERR_BAD_NUM_COMPONENTS

The number of components value is invalid.

-1074397054

IMG_ERR_BAD_BIN_THRESHOLD_LOW

The requested lower binary threshold value is out of range.

-1074397053

IMG_ERR_BAD_BIN_THRESHOLD_HIGH

The requested upper binary threshold value is out of range.

-1074397052

IMG_ERR_BAD_BLACK_REF_VOLT

The requested black reference voltage value is out of range.

-1074397051

IMG_ERR_BAD_WHITE_REF_VOLT

The requested white reference voltage value is out of range.

-1074397050

IMG_ERR_BAD_FREQ_STD

The video standard frequency value selected for the 6431 chip is invalid.

-1074397049

IMG_ERR_BAD_HDELAY

The HDELAY value is out of range.

-1074397048

IMG_ERR_BAD_LOCK_SPEED

The setting for lock speed is invalid.

-1074397047

IMG_ERR_BAD_BUFFER_LIST

The buffer list is invalid.

-1074397046

IMG_ERR_BOARD_NOT_INITIALIZED

The image aquisition device is not yet initialized.

-1074397045

IMG_ERR_BAD_PCLK_SOURCE

The requested pixel clock source is invalid for this image acquisition device.

-1074397044

IMG_ERR_BAD_VIDEO_LOCK_CHANNEL

The selected video timing signal source is invalid for this image acquisition device.

-1074397043

IMG_ERR_BAD_LOCK_SEL

The selected lock mode is invalid.

-1074397042

IMG_ERR_BAD_BAUD_RATE

The selected baud rate is invalid for this image acquisition device.

-1074397041

IMG_ERR_BAD_STOP_BITS

The requested serial stop bits setting is invalid for this image acquisition device.

-1074397040

IMG_ERR_BAD_DATA_BITS

The requested serial data bits setting is invalid for this image acquisition device.

-1074397039

IMG_ERR_BAD_PARITY

The requested serial parity setting is invalid for this image acquisition device.

-1074397038

IMG_ERR_TERM_STRING_NOT_FOUND

The requested serial termination string was not found in the returned buffer.

-1074397037

IMG_ERR_SERIAL_READ_TIMEOUT

The serial read did not complete within the specified timeout period.

-1074397036

IMG_ERR_SERIAL_WRITE_TIMEOUT

The serial write operation could not execute within the specified timeout period.

-1074397035

IMG_ERR_BAD_SYNCHRONICITY

The async setting in imgSessionAcquire is invalid.

-1074397034

IMG_ERR_BAD_INTERLACING_CONFIG

This tap configuration cannot be interlaced.

-1074397032

IMG_ERR_BAD_CHIP_CODE

The requested chip code is invalid. Could not find a matching chip.

-1074397031

IMG_ERR_LUT_NOT_PRESENT

The LUT chip does not exist on this image acquisition device.

-1074397030

IMG_ERR_DSPFILTER_NOT_PRESENT

The DSP filter does not exist on this image acquisition device.

-1074397029

IMG_ERR_DEVICE_NOT_FOUND

The image acquisition device was not found.

-1074397028

IMG_ERR_ONBOARD_MEM_CONFIG

An error occurred during onboard memory configuration.

-1074397027

IMG_ERR_BAD_POINTER

The pointer provided is either NULL when it should not be, or is non-NULL when it should be NULL.

-1074397026

IMG_ERR_BAD_BUFFER_LIST_INDEX

The requested buffer list index is invalid.

-1074397025

IMG_ERR_INVALID_BUFFER_ATTRIBUTE

The requested buffer attribute is invalid.

-1074397024

IMG_ERR_INVALID_BUFFER_PTR

The requested buffer was not created by the NI-IMAQ driver software.

-1074397023

IMG_ERR_BUFFER_LIST_ALREADY_LOCKED

This image acquisition device already has a buffer list locked down in memory.

-1074397022

IMG_ERR_BAD_DEVICE_TYPE

The type of image acquisition device requested is invalid.

-1074397021

IMG_ERR_BAD_BAR_SIZE

The size of one or more Base Address Register windows is incorrect.

-1074397019

IMG_ERR_NO_VALID_COUNTER_RECT

The selected region of interest is not valid for the camera tap configuration.

-1074397018

IMG_ERR_ACQ_STOPPED

The wait terminated because the acquisition stopped.

-1074397017

IMG_ERR_BAD_TRIGGER_ACTION

The requested trigger action is invalid.

-1074397016

IMG_ERR_BAD_TRIGGER_POLARITY

The trigger polarity is invalid.

-1074397015

IMG_ERR_BAD_TRIGGER_NUMBER

The requested trigger line is invalid. Please verify that this trigger line exists and is properly connected to your device.

-1074397014

IMG_ERR_BUFFER_NOT_AVAILABLE

The requested buffer has been overwritten and is no longer available.

-1074397012

IMG_ERR_BAD_PULSE_ID

The pulse ID is invalid.

-1074397011

IMG_ERR_BAD_PULSE_TIMEBASE

The requested timebase for the pulse is invalid.

-1074397010

IMG_ERR_BAD_PULSE_GATE

The gate signal for the pulse is invalid.

-1074397009

IMG_ERR_BAD_PULSE_GATE_POLARITY

The polarity of the pulse gate signal is invalid.

-1074397008

IMG_ERR_BAD_PULSE_OUTPUT

The output signal for the pulse is invalid.

-1074397007

IMG_ERR_BAD_PULSE_OUTPUT_POLARITY

The requested polarity of the pulse output signal is invalid.

-1074397006

IMG_ERR_BAD_PULSE_MODE

The requested pulse mode is invalid.

-1074397005

IMG_ERR_NOT_ENOUGH_RESOURCES

There are not enough system resources to complete the requested option.

-1074397004

IMG_ERR_INVALID_RESOURCE

The requested resource is invalid.

-1074397003

IMG_ERR_BAD_FVAL_ENABLE

The selected FVAL enable mode is invalid.

-1074397002

IMG_ERR_BAD_WRITE_ENABLE_MODE

The specified combination of enable lines is invalid.

-1074397001

IMG_ERR_COMPONENT_MISMATCH

Internal Error: The installed components of the NI-IMAQ driver software are incompatible. Reinstall NI-IMAQ.

-1074397000

IMG_ERR_FPGA_PROGRAMMING_FAILED

Internal Error: The attempt to download the program to an FPGA was unsuccessful.

-1074396999

IMG_ERR_CONTROL_FPGA_FAILED

Internal Error: The control FPGA did not initialize properly.

-1074396998

IMG_ERR_CHIP_NOT_READABLE

Internal Error: Attempted to read a write-only chip.

-1074396997

IMG_ERR_CHIP_NOT_WRITABLE

Internal Error: Attempted to write to a read-only chip.

-1074396996

IMG_ERR_I2C_BUS_FAILED

Internal Error: The I2C bus did not respond correctly.

-1074396995

IMG_ERR_DEVICE_IN_USE

The requested image acquisition device is already in use.

-1074396994

IMG_ERR_BAD_TAP_DATALANES

The requested data lanes on a particular tap are invalid.

-1074396993

IMG_ERR_BAD_VIDEO_GAIN

The requested video gain value is out of range.

-1074396992

IMG_ERR_VHA_MODE_NOT_ALLOWED

The current device configuration does not allow VHA mode.

-1074396991

IMG_ERR_BAD_TRACKING_SPEED

The color video tracking speed is invalid.

-1074396990

IMG_ERR_BAD_COLOR_INPUT_SELECT

The selected input connector is not valid.

-1074396989

IMG_ERR_BAD_HAV_OFFSET

The offset value for the Horizontal Active Video color decoder setting is invalid.

-1074396988

IMG_ERR_BAD_HS1_OFFSET

The Horizontal Sync 1offset value for the color decoder is invalid.

-1074396987

IMG_ERR_BAD_HS2_OFFSET

The Horizontal Sync 2 offset value for the color decoder is invalid.

-1074396986

IMG_ERR_BAD_IF_CHROMA

The chroma IF compensation setting is invalid.

-1074396985

IMG_ERR_BAD_COLOR_OUTPUT_FORMAT

The color output format is invalid.

-1074396984

IMG_ERR_BAD_SAMSUNG_SCHCMP

The phase constant specified for the color decoder is invalid.

-1074396983

IMG_ERR_BAD_SAMSUNG_CDLY

The chroma path group delay setting is invalid.

-1074396982

IMG_ERR_BAD_SECAM_DETECT

The SECAM detection method is invalid.

-1074396981

IMG_ERR_BAD_FSC_DETECT

The FSC detection method is invalid.

-1074396980

IMG_ERR_BAD_SAMSUNG_CFTC

The chroma frequency tracking time constant is invalid.

-1074396979

IMG_ERR_BAD_SAMSUNG_CGTC

The chroma gain tracking time constant setting is invalid.

-1074396978

IMG_ERR_BAD_SAMSUNG_SAMPLE_RATE

The pixel sampling rate is invalid.

-1074396977

IMG_ERR_BAD_SAMSUNG_VSYNC_EDGE

The requested VSYNC edge to synchronize with is invalid.

-1074396976

IMG_ERR_SAMSUNG_LUMA_GAIN_CTRL

The method used to control the gain setting for luminance is invalid.

-1074396975

IMG_ERR_BAD_SET_COMB_COEF

The chrominance comb coefficients setting is invalid.

-1074396974

IMG_ERR_SAMSUNG_CHROMA_TRACK

The method used to track chrominance is invalid.

-1074396973

IMG_ERR_SAMSUNG_DROP_LINES

The algorithm for dropping video lines is invalid.

-1074396972

IMG_ERR_VHA_OPTIMIZATION_NOT_ALLOWED

VHA optimization is not applicable for the current configuration.

-1074396971

IMG_ERR_BAD_PG_TRANSITION

A pattern generation is invalid.

-1074396970

IMG_ERR_TOO_MANY_PG_TRANSITIONS

The number of pattern generation transitions exceeds the maximum allowed for the selected image acquisition device.

-1074396969

IMG_ERR_BAD_CL_DATA_CONFIG

The data configuration for the channel link chip is invalid.

-1074396968

IMG_ERR_BAD_OCCURRENCE

The requested occurrence is invalid.

-1074396967

IMG_ERR_BAD_PG_MODE

The pattern generation mode is invalid.

-1074396966

IMG_ERR_BAD_PG_SOURCE

The pattern generation source signal is invalid.

-1074396965

IMG_ERR_BAD_PG_GATE

The pattern generation gate signal is invalid.

-1074396964

IMG_ERR_BAD_PG_GATE_POLARITY

The pattern generation gate polarity is invalid.

-1074396963

IMG_ERR_BAD_PG_WAVEFORM_INITIAL_STATE

The initial state for the pattern generation waveform is invalid.

-1074396962

IMG_ERR_INVALID_CAMERA_ATTRIBUTE

The requested camera attribute is invalid.

-1074396961

IMG_ERR_BOARD_CLOSED

The request failed because the device is closed.

-1074396960

IMG_ERR_FILE_NOT_FOUND

The requested file could not be found.

-1074396959

IMG_ERR_BAD_1409_DSP_FILE

The dspfilter1409.bin file is corrupt or missing.

-1074396958

IMG_ERR_BAD_SCARABXCV200_32_FILE

The scarabXCV200.bin file is corrupt or missing.

-1074396957

IMG_ERR_BAD_SCARABXCV200_16_FILE

The scarab16bit.bin file is corrupt or missing.

-1074396956

IMG_ERR_BAD_CAMERA_LINK_FILE

The Camera Link FPGA bin file is corrupt or missing.

-1074396955

IMG_ERR_BAD_1411_CSC_FILE

The colorspace.bin file is corrupt or missing.

-1074396954

IMG_ERR_BAD_ERROR_CODE

The error code passed into imgShowError is unknown.

-1074396953

IMG_ERR_DRIVER_TOO_OLD

The image acquisition device requires a newer version of the NI-IMAQ driver software.

-1074396952

IMG_ERR_INSTALLATION_CORRUPT

The NI-IMAQ driver software installation is corrupt.

-1074396951

IMG_ERR_NO_ONBOARD_MEMORY

NI-IMAQ cannot perform an onboard acquisition because there is no onboard memory.

-1074396950

IMG_ERR_BAD_BAYER_PATTERN

The Bayer pattern specified is invalid.

-1074396949

IMG_ERR_CANNOT_INITIALIZE_BOARD

The image acquisition device is not operating correctly and cannot be initialized.

-1074396948

IMG_ERR_CALIBRATION_DATA_CORRUPT

The stored calibration data has been corrupted.

-1074396947

IMG_ERR_DRIVER_FAULT

NI-IMAQ attempted to perform an illegal operation.

-1074396946

IMG_ERR_ADDRESS_OUT_OF_RANGE

NI-IMAQ attempted to access a chip beyond the applicable addressable range.

-1074396945

IMG_ERR_ONBOARD_ACQUISITION

The requested operation is not valid for onboard acquisitions.

-1074396944

IMG_ERR_NOT_AN_ONBOARD_ACQUISITION

The requested operation is valid only for onboard acquisitions.

-1074396943

IMG_ERR_BOARD_ALREADY_INITIALIZED

NI-IMAQ attempted to call an initialization function on an image acquisition device that was already initialized.

-1074396942

IMG_ERR_NO_SERIAL_PORT

The image acquisition device does not have a serial port. Serial functions are invalid.

-1074396941

IMG_ERR_BAD_VENABLE_GATING_MODE

The VENABLE gating mode selection is invalid.

-1074396940

IMG_ERR_BAD_1407_LUT_FILE

The lutfpga1407.bin file is corrupt or missing.

-1074396939

IMG_ERR_BAD_SYNC_DETECT_LEVEL

The synchronization signal detection level is out of range.

-1074396938

IMG_ERR_BAD_1405_GAIN_FILE

The gain1405.bin file is corrupt or missing.

-1074396937

IMG_ERR_CLAMP_DAC_NOT_PRESENT

The image acquisition device does not have a clamp DAC.

-1074396936

IMG_ERR_GAIN_DAC_NOT_PRESENT

The image acquisition device does not have a gain DAC.

-1074396935

IMG_ERR_REF_DAC_NOT_PRESENT

The image acquisition device does not have a reference DAC.

-1074396934

IMG_ERR_BAD_SCARABXC2S200_FILE

The scarabXC2S200.bin file is corrupt or missing.

-1074396933

IMG_ERR_BAD_LUT_GAIN

The specified LUT gain is invalid.

-1074396932

IMG_ERR_BAD_MAX_BUF_LIST_ITER

The requested number of buffer lists for an onboard acquisition is invalid.

-1074396931

IMG_ERR_BAD_PG_LINE_NUM

The requested line number for pattern generation is invalid.

-1074396930

IMG_ERR_BAD_BITS_PER_PIXEL

The requested number of bits per pixel is invalid.

-1074396929

IMG_ERR_TRIGGER_ALARM

Triggers are coming in too fast to handle them and maintain system responsiveness. Check for noise on your trigger line.

-1074396928

IMG_ERR_BAD_SCARABXC2S200_03052009_FILE

The scarabXC2S200_03052009.bin file is corrupt or missing.

-1074396927

IMG_ERR_LUT_CONFIG

Internal Error: An error occurred while configuring the LUT.

-1074396926

IMG_ERR_CONTROL_FPGA_REQUIRES_NEWER_DRIVER

A firmware update has been applied to the device. The image acquisition device requires a newer version of the NI-IMAQ driver software to work with the update.

-1074396925

IMG_ERR_CONTROL_FPGA_PROGRAMMING_FAILED

An error occurred while updating the firmware on the device.

-1074396924

IMG_ERR_BAD_TRIGGER_SIGNAL_LEVEL

The trigger line does not support the requested signaling level.

-1074396923

IMG_ERR_CAMERA_FILE_REQUIRES_NEWER_DRIVER

This camera file requires a newer version of NI-IMAQ.

-1074396922

IMG_ERR_DUPLICATED_BUFFER

An image cannot be placed in the same buffer list more than once.

-1074396921

IMG_ERR_NO_ERROR

No error

-1074396920

IMG_ERR_INTERFACE_NOT_SUPPORTED

The camera file does not support the current interface type.

-1074396919

IMG_ERR_BAD_PCLK_POLARITY

The requested polarity for the pixel clock is invalid.

-1074396918

IMG_ERR_BAD_ENABLE_POLARITY

The requested polarity for the enable line is invalid.

-1074396917

IMG_ERR_BAD_PCLK_SIGNAL_LEVEL

The requested signaling level for the pixel clock is invalid.

-1074396916

IMG_ERR_BAD_ENABLE_SIGNAL_LEVEL

The requested signaling level for the enable line is invalid.

-1074396915

IMG_ERR_BAD_DATA_SIGNAL_LEVEL

The requested signaling level for the data lines is invalid.

-1074396914

IMG_ERR_BAD_CTRL_SIGNAL_LEVEL

The requested signaling level for the control lines is invalid.

-1074396913

IMG_ERR_BAD_WINDOW_HANDLE

The requested window handle is invalid.

-1074396912

IMG_ERR_CANNOT_WRITE_FILE

Cannot open the requested file for writing.

-1074396911

IMG_ERR_CANNOT_READ_FILE

Cannot open the requested file for reading.

-1074396910

IMG_ERR_BAD_SIGNAL_TYPE

Cannot wait on the requested signal.

-1074396909

IMG_ERR_BAD_SAMPLES_PER_LINE

The specified number of samples per line is invalid.

-1074396908

IMG_ERR_BAD_SAMPLES_PER_LINE_REF

The specified reference value for samples per line is invalid.

-1074396907

IMG_ERR_USE_EXTERNAL_HSYNC

The current video signal requires an external HSYNC to be used to lock the signal.

-1074396906

IMG_ERR_BUFFER_NOT_ALIGNED

An image buffer is not properly aligned. All image buffers must be aligned to a 4-byte boundary.

-1074396905

IMG_ERR_ROWPIXELS_TOO_SMALL

The number of pixels per row is less than the region of interest width.

-1074396904

IMG_ERR_ROWPIXELS_NOT_ALIGNED

The number of pixels per row is not properly aligned. The total number of bytes per row must be aligned to a 4-byte boundary.

-1074396903

IMG_ERR_ROI_WIDTH_NOT_ALIGNED

The ROI width is not properly aligned. The total number of bytes bounded by the ROI width must be aligned to a 4-byte boundary.

-1074396902

IMG_ERR_LINESCAN_NOT_ALLOWED

Linescan mode is not valid for this tap configuration.

-1074396901

IMG_ERR_INTERFACE_FILE_REQUIRES_NEWER_DRIVER

This interface file requires a newer version of NI-IMAQ.

-1074396900

IMG_ERR_BAD_SKIP_COUNT

The requested skip count value is out of range.

-1074396899

IMG_ERR_BAD_NUM_X_ZONES

The number of X zones in the tap configuration of the camera is invalid.

-1074396898

IMG_ERR_BAD_NUM_Y_ZONES

The number of Y zones in the tap configuration of the camera is invalid.

-1074396897

IMG_ERR_BAD_NUM_TAPS_PER_X_ZONE

The number of taps per X zone in the tap configuration of the camera is invalid.

-1074396896

IMG_ERR_BAD_NUM_TAPS_PER_Y_ZONE

The number of taps per Y zone in the tap configuration of the camera is invalid.

-1074396895

IMG_ERR_BAD_TEST_IMAGE_TYPE

The requested test image type is invalid.

-1074396894

IMG_ERR_CANNOT_ACQUIRE_FROM_CAMERA

This firmware is not capable of acquiring from a camera.

-1074396893

IMG_ERR_BAD_CTRL_LINE_SOURCE

The source for the camera control line is invalid.

-1074396892

IMG_ERR_BAD_PIXEL_EXTRACTOR

The requested pixel extractor is invalid.

-1074396891

IMG_ERR_BAD_NUM_TIME_SLOTS

The requested number of time slots is invalid.

-1074396890

IMG_ERR_BAD_PLL_VCO_DIVIDER

The requested VCO divide down number is invalid. The only valid values are 2, 4, 8 and 16.

-1074396889

IMG_ERR_CRITICAL_TEMP

The device temperature exceeded the critical temperature threshold.

-1074396888

IMG_ERR_BAD_DPA_OFFSET

The requested dynamic phase aligner offset is invalid.

-1074396887

IMG_ERR_BAD_NUM_POST_TRIGGER_BUFFERS

The requested number of post trigger buffers is invalid.

-1074396886

IMG_ERR_BAD_DVAL_MODE

The requested DVAL mode is invalid.

-1074396885

IMG_ERR_BAD_TRIG_GEN_REARM_SOURCE

The requested trigger generator rearm source signal is invalid.

-1074396884

IMG_ERR_BAD_ASM_GATE_SOURCE

The requested ASM gate signal is invalid.

-1074396883

IMG_ERR_TOO_MANY_BUFFERS

The requested number of buffer list buffers is not supported by this image acquisition device.

-1074396882

IMG_ERR_BAD_TAP_4_VALID_RECT

The rectangle defined for Tap 4 is invalid.

-1074396881

IMG_ERR_BAD_TAP_5_VALID_RECT

The rectangle defined for Tap 5 is invalid.

-1074396880

IMG_ERR_BAD_TAP_6_VALID_RECT

The rectangle defined for Tap 6 is invalid.

-1074396879

IMG_ERR_BAD_TAP_7_VALID_RECT

The rectangle defined for Tap 7 is invalid.

-1074396878

IMG_ERR_FRONT_END_BANDWIDTH_EXCEEDED

The camera is providing image data faster than the image acquisition device can receive it.

-1074396877

IMG_ERR_BAD_PORT_NUMBER

The requested port number does not exist.

-1074396876

IMG_ERR_PORT_CONFIG_CONFLICT

The requested port cannot be cannot be configured due to a conflict with another port that is currently opened.

-1074396875

IMG_ERR_BITSTREAM_INCOMPATIBLE

The requested bitstream is not compatible with the image acquisition device.

-1074396874

IMG_ERR_SERIAL_PORT_IN_USE

The requested serial port is currently in use and is not accessible.

-1074396873

IMG_ERR_BAD_ENCODER_DIVIDE_FACTOR

The requested encoder divide factor is invalid.

-1074396872

IMG_ERR_ENCODER_NOT_SUPPORTED

Encoder support is not present for this image acquisition device. Please verify that this device is capable of handling encoder signals and that phase A and B are connected.

-1074396871

IMG_ERR_BAD_ENCODER_POLARITY

The requested encoder phase signal polarity is invalid.

-1074396870

IMG_ERR_BAD_ENCODER_FILTER

The requested encoder filter setting is invalid.

-1074396869

IMG_ERR_ENCODER_POSITION_NOT_SUPPORTED

This image acquisition device does not support reading the absolute encoder position.

-1074396868

IMG_ERR_IMAGE_IN_USE

The image appears to be in use. Please name the images differently to avoid this situation.

-1074396867

IMG_ERR_BAD_SCARABXL4000_FILE

The scarab.bin file is corrupt or missing.

-1074396866

IMG_ERR_BAD_CAMERA_ATTRIBUTE_VALUE

The requested camera attribute value is invalid. For numeric camera attributes, please ensure that the value is properly aligned and within the allowable range.

-1074396865

IMG_ERR_BAD_PULSE_WIDTH

The requested pulse width is invalid.

-1074396864

IMG_ERR_FPGA_FILE_NOT_FOUND

The requested FPGA bitstream file could not be found.

-1074396863

IMG_ERR_FPGA_FILE_CORRUPT

The requested FPGA bitstream file is corrupt.

-1074396862

IMG_ERR_BAD_PULSE_DELAY

The requested pulse delay is invalid.

-1074396861

IMG_ERR_BAD_PG_IDLE_SIGNAL_LEVEL

The pattern generation (PG) idle state is invalid. Camera control lines sourced from the PG unit must be all tristate or all non-tristate.

-1074396860

IMG_ERR_BAD_PG_WAVEFORM_IDLE_STATE

The idle state for the pattern generation waveform is invalid.

-1074396859

IMG_ERR_64_BIT_MEMORY_NOT_SUPPORTED

This device only supports acquiring into the 32-bit address space; however, portions of the image buffer list reside outside of 32-bit physical memory.

-1074396858

IMG_ERR_64_BIT_MEMORY_UPDATE_AVAILABLE

This 32-bit device is operating on a 64-bit OS with more than 3GB of physical memory. An update is available to allow acquisitions into 64-bit physical memory. Launch the updater from the menu in MAX: Tools»NI Vision»Update NI-IMAQ Device Firmware.

-1074396857

IMG_ERR_32_BIT_MEMORY_LIMITATION

This 32-bit device is operating on a 64-bit OS with more than 3GB of physical memory. This configuration could allocate 64-bit memory which is unsupported by the device. To solve this problem, reduce the amount of physical memory in the system.

-1074396856

IMG_ERR_KERNEL_NOT_LOADED

The kernel component of the driver, niimaqk.sys, is not loaded. Verify that an IMAQ device is in your system or reinstall the driver.

-1074396855

IMG_ERR_BAD_SENSOR_SHUTTER_PERIOD

The sensor shutter period is invalid. Check the horizontal and vertical shutter period values.

-1074396854

IMG_ERR_BAD_SENSOR_CCD_TYPE

The sensor CCD type is invalid.

-1074396853

IMG_ERR_BAD_SENSOR_PARTIAL_SCAN

The sensor partial scan mode is invalid.

-1074396852

IMG_ERR_BAD_SENSOR_BINNING

The sensor binning mode is invalid.

-1074396851

IMG_ERR_BAD_SENSOR_GAIN

The sensor gain value is invalid.

-1074396850

IMG_ERR_BAD_SENSOR_BRIGHTNESS

The sensor brightness value is invalid.

-1074396849

IMG_ERR_BAD_LED_STATE

The LED state is invalid.

-1074396848

IMG_ERR_64_BIT_NOT_SUPPORTED

The operation is not supported for 64-bit applications.

-1074396847

IMG_ERR_BAD_TRIGGER_DELAY

The requested trigger delay value is not supported.

-1074396846

IMG_ERR_LIGHTING_CURRENT_EXCEEDS_LIMITS

The configured lighting current level exceeds the hardware or user's configured limits.

-1074396845

IMG_ERR_LIGHTING_INVALID_MODE

The configured lighting mode is invalid.

-1074396844

IMG_ERR_LIGHTING_EXTERNAL_INVALID_MODE

The configured external lighting mode is invalid.

-1074396843

IMG_ERR_BAD_SENSOR_EXPOSURE

The sensor exposure time is invalid.

-1074396842

IMG_ERR_BAD_FRAME_RATE

The frame rate is invalid for the current configuration.

-1074396841

IMG_ERR_BAD_SENSOR_PARTIAL_SCAN_BINNING_COMBINATION

The partial scan mode / binning mode combination is invalid.

-1074396840

IMG_ERR_SOFTWARE_TRIGGER_NOT_CONFIGURED

The requested software trigger is not configured.

-1074396839

IMG_ERR_FREE_RUN_MODE_NOT_ALLOWED

Free-run mode is not allowed in the current configuration. This is typically caused by simultaneously enabling free-run mode and a triggered acquisition.

-1074396838

IMG_ERR_BAD_LIGHTING_RAMPUP

The lighting ramp-up delay is either less than the minimum value allowed or larger than the maximum time that the light is allowed to be on.

-1074396837

IMG_ERR_AFE_CONFIG_TIMEOUT

Internal Error: A write to the AFEConfig register did not complete properly.

-1074396836

IMG_ERR_LIGHTING_ARM_TIMEOUT

Internal Error: The arming of the lighting controller did not complete properly.

-1074396835

IMG_ERR_LIGHTING_SHORT_CIRCUIT

The Direct Drive lighting controller has detected an abnormal load condition, such as a short circuit. Correct the abnormal load condition before restarting the acquisition.

-1074396834

IMG_ERR_BAD_BOARD_HEALTH

The board health register has indicated an internal problem.

-1074396833

IMG_ERR_LIGHTING_BAD_CONTINUOUS_CURRENT_LIMIT

The requested continuous current limit for the lighting controller is less than the minimum allowed current level.

-1074396832

IMG_ERR_LIGHTING_BAD_STROBE_DUTY_CYCLE_LIMIT

The requested duty cycle limit for the lighting controller strobe mode is invalid.

-1074396831

IMG_ERR_LIGHTING_BAD_STROBE_DURATION_LIMIT

The requested duration limit for the lighting controller strobe mode is invalid.

-1074396830

IMG_ERR_BAD_LIGHTING_CURRENT_EXPOSURE_COMBINATION

The lighting current is invalid because the exposure time plus the lighting ramp-up time exceeds either the strobe duration limit or the strobe duty cycle limit.

-1074396829

IMG_ERR_LIGHTING_HEAD_CONFIG_NOT_FOUND

The configuration for the desired light head was not found.

-1074396828

IMG_ERR_LIGHTING_HEAD_DATA_CORRUPT

The data for the desired light head configuration is invalid or corrupt.

-1074396827

IMG_ERR_LIGHTING_ABORT_TIMEOUT

Internal Error: The abort of the lighting controller did not complete properly.

-1074396826

IMG_ERR_LIGHTING_BAD_STROBE_CURRENT_LIMIT

The requested strobe current limit for the lighting controller is less than the minimum allowed current.

-1074396825

IMG_ERR_DMA_ENGINE_UNRESPONSIVE

Internal Error: The DMA engine is unresponsive. Reboot the target. If the problem persists contact National Instruments.

-1074396824

IMG_ERR_IMAGE_NOT_32BYTE_ALIGNED

The image width is not a multiple of 32-bytes. The current configuration requires that the image width be a multiple of 32-bytes.

-1074396823

IMG_ERR_IMAGE_BORDER_NONZERO

The image border is not zero. The current configuration requires that the image have no border.

-1074396822

IMG_ERR_UNKNOWN_CAMERA_FILE

No valid camera file selected for this interface.

-1074396821

IMG_ERR_ONBOARD_DECODING_NOT_CHANGEABLE_DURING_ACQ

The Bayer pattern cannot be change to None or away from None while the acquisition is running and onboard Bayer decoding is enabled.

-1074396820

IMG_ERR_BAD_BAYER_GAIN_FOR_ONBOARD_DECODE

The specified Bayer gain is not supported when onboard Bayer decoding is enabled.

-1074396819

IMG_ERR_BAD_BAYER_PATTERN_FOR_ONBOARD_DECODE

The specified Bayer pattern is not supported when onboard Bayer decoding is enabled.

-1074396818

IMG_ERR_BAD_NUM_COMPONENTS_FOR_ONBOARD_DECODE

The number of components value in the camera file must be 1 when onboard Bayer decoding is enabled.

-1074396817

IMG_ERR_BAD_NUM_PHANTOM_COMPONENTS_FOR_ONBOARD_DECODE

The number of phantom components value in the camera file must be 0 when onboard Bayer decoding is enabled.

-1074396816

IMG_ERR_POCL_FAULT

The Power Over CameraLink circuitry has encountered an unexpected error.

-1074396815

IMG_ERR_POCL_VIDEO_LOCK

The Power Over CameraLink circuitry is unable to provide power and the device cannot detect a recognizable video source.

-1074396814

IMG_ERR_POCL_BAD_FUSE

The Power Over CameraLink circuitry cannot provide power due to a blown fuse.

-1074396813

IMG_ERR_POCL_NO_AUX_POWER

The Power Over CameraLink circuitry cannot provide power due to a missing auxilliary power connection

-1074396812

IMG_ERR_PULSE_UPDATE_NOT_SUPPORTED

This image acquisition device does not support updating pulses.

-1074396811

IMG_ERR_BAD_BITS_PER_COMPONENT_FOR_ONBOARD_DECODE

The bits per component value in the camera file must be less than 16 when onboard Bayer decoding is enabled.

-1074396810

IMG_ERR_IO_BOARD_NOT_PRESENT

The requested configuration requires the IO extension board, but the IO extension board is not connected.