提取网页的markdown表格利器

nlper

在线Markdown表格转换器

尝试1,直接通过html导入的功能

导入方法

import→URL→贴入复制的url→点击parse→往下拖动点击import data→把结果栏生成的结果copy到markdown
具体可见下面的GIF图嘞

从url中提取markdown表格

得到结果如下

尝试2:通过源码导入

导入方法

首先点击目标网页,右键→检查→选择页面中的元素(选择到table对应的元素)→复制table对应的html内容
import→HTML→贴入上一步复制的→import data→把结果栏生成的结果copy到markdown
具体可见下面的GIF图嘞

从url源码中提取markdown表格

得到结果如下

Command lineEnvironmentConfig fileDescription
-f, --locustfileLOCUST_LOCUSTFILElocustfilePython module file to import, e.g. ‘../other.py’. Default: locustfile
-H, --hostLOCUST_HOSThostHost to load test in the following format: http://10.21.32.33
-u, --usersLOCUST_USERSusersNumber of concurrent Locust users. Primarily used together with –headless. Can be changed during a test by inputs w, W(spawn 1, 10 users) and s, S(stop 1, 10 users)
-r, --spawn-rateLOCUST_SPAWN_RATEspawn-rateThe rate per second in which users are spawned. Primarily used together with –headless
--hatch-rateLOCUST_HATCH_RATEhatch-rate==SUPPRESS==
-t, --run-timeLOCUST_RUN_TIMErun-timeStop after the specified amount of time, e.g. (300s, 20m, 3h, 1h30m, etc.). Only used together with –headless. Defaults to run forever.
--web-hostLOCUST_WEB_HOSTweb-hostHost to bind the web interface to. Defaults to ‘*’ (all interfaces)
--web-port, -PLOCUST_WEB_PORTweb-portPort on which to run web host
--headlessLOCUST_HEADLESSheadlessDisable the web interface, and instead start the load test immediately. Requires -u and -t to be specified.
--headfulLOCUST_HEADFULheadful==SUPPRESS==
--web-authLOCUST_WEB_AUTHweb-authTurn on Basic Auth for the web interface. Should be supplied in the following format: username:password
--tls-certLOCUST_TLS_CERTtls-certOptional path to TLS certificate to use to serve over HTTPS
--tls-keyLOCUST_TLS_KEYtls-keyOptional path to TLS private key to use to serve over HTTPS
--masterLOCUST_MODE_MASTERmasterSet locust to run in distributed mode with this process as master
--master-bind-hostLOCUST_MASTER_BIND_HOSTmaster-bind-hostInterfaces (hostname, ip) that locust master should bind to. Only used when running with –master. Defaults to * (all available interfaces).
--master-bind-portLOCUST_MASTER_BIND_PORTmaster-bind-portPort that locust master should bind to. Only used when running with –master. Defaults to 5557.
--expect-workersLOCUST_EXPECT_WORKERSexpect-workersHow many workers master should expect to connect before starting the test (only when –headless used).
--workerLOCUST_MODE_WORKERworkerSet locust to run in distributed mode with this process as worker
--master-hostLOCUST_MASTER_NODE_HOSTmaster-hostHost or IP address of locust master for distributed load testing. Only used when running with –worker. Defaults to 127.0.0.1.
--master-portLOCUST_MASTER_NODE_PORTmaster-portThe port to connect to that is used by the locust master for distributed load testing. Only used when running with –worker. Defaults to 5557.
-T, --tagsLOCUST_TAGStagsList of tags to include in the test, so only tasks with any matching tags will be executed
-E, --exclude-tagsLOCUST_EXCLUDE_TAGSexclude-tagsList of tags to exclude from the test, so only tasks with no matching tags will be executed
--csvLOCUST_CSVcsvStore current request stats to files in CSV format. Setting this option will generate three files: [CSV_PREFIX]_stats.csv, [CSV_PREFIX]_stats_history.csv and [CSV_PREFIX]_failures.csv
--csv-full-historyLOCUST_CSV_FULL_HISTORYcsv-full-historyStore each stats entry in CSV format to _stats_history.csv file. You must also specify the ‘–csv’ argument to enable this.
--print-statsLOCUST_PRINT_STATSprint-statsPrint stats in the console
--only-summaryLOCUST_ONLY_SUMMARYonly-summaryOnly print the summary stats
--reset-statsLOCUST_RESET_STATSreset-statsReset statistics once spawning has been completed. Should be set on both master and workers when running in distributed mode
--htmlLOCUST_HTMLhtmlStore HTML report file
--skip-log-setupLOCUST_SKIP_LOG_SETUPskip-log-setupDisable Locust’s logging setup. Instead, the configuration is provided by the Locust test or Python defaults.
--loglevel, -LLOCUST_LOGLEVELloglevelChoose between DEBUG/INFO/WARNING/ERROR/CRITICAL. Default is INFO.
--logfileLOCUST_LOGFILElogfilePath to log file. If not set, log will go to stdout/stderr
--exit-code-on-errorLOCUST_EXIT_CODE_ON_ERRORexit-code-on-errorSets the process exit code to use when a test result contain any failure or error
-s, --stop-timeoutLOCUST_STOP_TIMEOUTstop-timeoutNumber of seconds to wait for a simulated user to complete any executing task before exiting. Default is to terminate immediately. This parameter only needs to be specified for the master process when running Locust distributed.
阅读 227

nlp,数据分析&数据挖掘相关

9 声望
0 粉丝
0 条评论
你知道吗?

nlp,数据分析&数据挖掘相关

9 声望
0 粉丝
文章目录
宣传栏