使用 RKE 方式搭建 K8s 集群并部署 NebulaGraph

头像
NebulaGraph
     浙江
    阅读 40 分钟

    本文由社区用户 Albert 贡献，首发于 NebulaGraph 论坛，旨在提供多一种的部署方式使用 NebulaGraph。

    在本文，我将会详细地记录下我用 K8s 部署分布式图数据库 NebulaGraph 的过程。下面是本次实践的内容规划：

    1. 一到十章节为 K8s 集群搭建过程；
    2. 十一到十五章节为参考 NebulaGraph 官方文档安装部署 NebulaGraph的过程；

    本文所有实践是在本地虚拟机 3 台 CentOS 实例上完成

    一、集群环境准备

    本文所有集群都遵循以下的部署，仅供参考。

    首先，集群规划 方面：

    #把 xxx 替换为对应的主机名
192.168.222.141 node1
192.168.222.142 node2
192.168.222.143 node3

    配置静态 IP

    # vi /etc/sysconfig/network-scripts/ifcfg-enss3

IPADDR="192.168.222.XXX" # XXX 是自己规划的 IP
PREFIX="24"  # 掩码 4 个 255
GATEWAY="192.168.222.XXX" # 网关需要自己指定
DNS1="114.114.114.114" # DNS 也可以设置为其他，能用即可

    配置主机名

    hostnamectl set-hostname xxx
192.168.222.141 node1
192.168.222.142 node2
192.168.222.143 node3

    配置 ip_forward 及过滤机制

    # vim /etc/sysctl.conf
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
modprobe br_netfilter
sysctl -p /etc/sysctl.conf

    防火墙设置

    # systemctl stop firewalld
# systemctl disable firewalld

    SELinux 设置

    #永久关闭，一定要重启操作系统后生效。
sed -ri 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config

    主机 Swap 分区设置

    sed -ri 's/.*swap.*/#&/' /etc/fstab

    集群时间同步设置

    # yum -y install ntpdate
# crontab -e
0 */1 * * *  ntpdate time1.aliyun.com

    二、Docker 部署

    ⚠️ 所有主机均要按照下面方法进行配置。

    配置 Docker YUM 源

    # wget -O /etc/yum.repos.d/docker-ce.repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

    安装 Docker CE

    通过下面命令安装 Docker 社区版本：

    #  yum install docker-ce-18.09.8-3.el7.x86_64 -y

    ⚠️ 这里需要指定 Docker 版本，否则后面 RKE 安装会报 Docker 版本不兼容问题。

    启动 Docker 服务

    # systemctl enable docker
# systemctl start docker

    配置 Docker 容器镜像加速器

    登录个人阿里云账号，在镜像加速中查看配置，将 xxxxx 替换为自己的 ID：

    # vim /etc/docker/daemon.json
# cat /etc/docker/daemon.json
{
  "registry-mirrors": ["https://xxxxx.mirror.aliyuncs.com"]
}

    三、Docker Compose 安装

    通过以下方式安装 Docker Compose：

    # curl -L "https://github.com/docker/compose/releases/download/1.28.5/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
# chmod +x /usr/local/bin/docker-compose
# ln -s /usr/local/bin/docker-compose /usr/bin/docker-compose
# docker-compose --version

    四、添加 Rancher 用户

    在使用 CentOS 时，不能使用 root 账号，因此我们要添加专用的账号进行 Docker 相关操作。同之前一样，下面操作需要在所有机器上执行：

    # useradd rancher
# usermod -aG docker rancher
# echo 123 | passwd --stdin rancher

    五、生成 SSH 证书用于部署集群

    RKE 二进制文件安装主机上创建密钥，即为 control 主机，用于部署集群。

    生成 SSH 证书

    # ssh-keygen

    复制证书到集群中所有主机

    # 修改文件夹所属用户及所属组
chown -R rancher:rancher /home/rancher
# ssh-copy-id rancher@node1
# ssh-copy-id rancher@node2
# ssh-copy-id rancher@node3

    验证 SSH 证书是否可用

    本次实践主要在 node1 上部署 RKE 二进制文件，并在 RKE 二进制文件安装主机机测试连接其它集群主机，可通过 Docker 的命令 docker ps 来查看服务是否可用。

    # ssh rancher@主机名
远程主机# docker ps

    六、RKE 工具下载

    依旧是在 node1 上部署 RKE 二进制文件。

    # wget https://github.com/rancher/rke/releases/download/v1.3.7/rke_linux-amd64
# mv rke_linux-amd64 /usr/local/bin/rke
# chmod +x /usr/local/bin/rke
# rke --version
rke version v1.3.7

    七、初始化 RKE 配置文件

    # mkdir -p /app/rancher
# cd /app/rancher
# rke config --name cluster.yml
[+] Cluster Level SSH Private Key Path [~/.ssh/id_rsa]: 集群私钥路径
[+] Number of Hosts [1]: 3 集群中有 3 个节点
[+] SSH Address of host (1) [none]: 192.168.10.10 第一个节点 IP 地址
[+] SSH Port of host (1) [22]: 22 第一个节点 SSH 访问端口
[+] SSH Private Key Path of host (192.168.10.10) [none]: ~/.ssh/id_rsa 第一个节点私钥路径
[+] SSH User of host (192.168.10.10) [ubuntu]: rancher 远程用户名
[+] Is host (192.168.10.10) a Control Plane host (y/n)? [y]: y 是否为 K8s 集群控制节点
[+] Is host (192.168.10.10) a Worker host (y/n)? [n]: n 不是 worker 节点
[+] Is host (192.168.10.10) an etcd host (y/n)? [n]: n 不是 etcd 节点
[+] Override Hostname of host (192.168.10.10) [none]: 不覆盖现有主机名
[+] Internal IP of host (192.168.10.10) [none]: 主机局域网 IP 地址
[+] Docker socket path on host (192.168.10.10) [/var/run/docker.sock]: 主机上 docker.sock 路径
[+] SSH Address of host (2) [none]: 192.168.10.12 第二个节点
[+] SSH Port of host (2) [22]: 22 远程端口
[+] SSH Private Key Path of host (192.168.10.12) [none]: ~/.ssh/id_rsa 私钥路径
[+] SSH User of host (192.168.10.12) [ubuntu]: rancher 远程访问用户
[+] Is host (192.168.10.12) a Control Plane host (y/n)? [y]: n 不是控制节点
[+] Is host (192.168.10.12) a Worker host (y/n)? [n]: y 是 worker 节点
[+] Is host (192.168.10.12) an etcd host (y/n)? [n]: n 不是 etcd 节点
[+] Override Hostname of host (192.168.10.12) [none]: 不覆盖现有主机名
[+] Internal IP of host (192.168.10.12) [none]: 主机局域网 IP 地址
[+] Docker socket path on host (192.168.10.12) [/var/run/docker.sock]: 主机上 docker.sock 路径
[+] SSH Address of host (3) [none]: 192.168.10.14 第三个节点
[+] SSH Port of host (3) [22]: 22 远程端口
[+] SSH Private Key Path of host (192.168.10.14) [none]: ~/.ssh/id_rsa 私钥路径
[+] SSH User of host (192.168.10.14) [ubuntu]: rancher 远程访问用户
[+] Is host (192.168.10.14) a Control Plane host (y/n)? [y]: n 不是控制节点
[+] Is host (192.168.10.14) a Worker host (y/n)? [n]: n 不是 worker 节点
[+] Is host (192.168.10.14) an etcd host (y/n)? [n]: y 是 etcd 节点
[+] Override Hostname of host (192.168.10.14) [none]: 不覆盖现有主机名
[+] Internal IP of host (192.168.10.14) [none]: 主机局域网 IP 地址
[+] Docker socket path on host (192.168.10.14) [/var/run/docker.sock]: 主机上 docker.sock 路径
[+] Network Plugin Type (flannel, calico, weave, canal, aci) [canal]: 使用的网络插件
[+] Authentication Strategy [x509]: 认证策略
[+] Authorization Mode (rbac, none) [rbac]: 认证模式
[+] Kubernetes Docker image [rancher/hyperkube:v1.21.9-rancher1]: 集群容器镜像
[+] Cluster domain [cluster.local]: 集群域名
[+] Service Cluster IP Range [10.43.0.0/16]: 集群中 Servic IP 地址范围
[+] Enable PodSecurityPolicy [n]: 是否开启 Pod 安装策略
[+] Cluster Network CIDR [10.42.0.0/16]: 集群 Pod 网络
[+] Cluster DNS Service IP [10.43.0.10]: 集群 DNS Service IP 地址
[+] Add addon manifest URLs or YAML files [no]: 是否增加插件 manifest URL 或配置文件

    在部署过程中，需要注意 37 行版本的设置，这里设置为：rancher/hyperkube:v1.21.9-rancher1

    [root@node1 rancher]# ls
cluster.yml

    此外，在 cluster.yaml 文件中修改以下配置：

    kube-controller:
image: ""
extra_args:
# 如果后面需要部署 kubeflow 或 istio 则一定要配置以下参数
cluster-signing-cert-file: "/etc/kubernetes/ssl/kube-ca.pem"
cluster-signing-key-file: "/etc/kubernetes/ssl/kube-ca-key.pem"

    八、集群部署

    # pwd
/app/rancher
# rke up
输出：
INFO[0000] Running RKE version: v1.3.7
INFO[0000] Initiating Kubernetes cluster
INFO[0000] [dialer] Setup tunnel for host [192.168.10.14]
INFO[0000] [dialer] Setup tunnel for host [192.168.10.10]
INFO[0000] [dialer] Setup tunnel for host [192.168.10.12]
INFO[0000] Checking if container [cluster-state-deployer] is running on host [192.168.10.14], try #1
INFO[0000] Checking if container [cluster-state-deployer] is running on host [192.168.10.10], try #1
INFO[0000] Checking if container [cluster-state-deployer] is running on host [192.168.10.12], try #1
INFO[0000] [certificates] Generating CA kubernetes certificates
INFO[0000] [certificates] Generating Kubernetes API server aggregation layer requestheader client CA certificates
INFO[0000] [certificates] GenerateServingCertificate is disabled, checking if there are unused kubelet certificates
INFO[0000] [certificates] Generating Kubernetes API server certificates
INFO[0000] [certificates] Generating Service account token key
INFO[0000] [certificates] Generating Kube Controller certificates
INFO[0000] [certificates] Generating Kube Scheduler certificates
INFO[0000] [certificates] Generating Kube Proxy certificates
INFO[0001] [certificates] Generating Node certificate
INFO[0001] [certificates] Generating admin certificates and kubeconfig
INFO[0001] [certificates] Generating Kubernetes API server proxy client certificates
INFO[0001] [certificates] Generating kube-etcd-192-168-10-14 certificate and key
INFO[0001] Successfully Deployed state file at [./cluster.rkestate]
INFO[0001] Building Kubernetes cluster
INFO[0001] [dialer] Setup tunnel for host [192.168.10.12]
INFO[0001] [dialer] Setup tunnel for host [192.168.10.14]
INFO[0001] [dialer] Setup tunnel for host [192.168.10.10]
INFO[0001] [network] Deploying port listener containers
INFO[0001] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0001] Starting container [rke-etcd-port-listener] on host [192.168.10.14], try #1
INFO[0001] [network] Successfully started [rke-etcd-port-listener] container on host [192.168.10.14]
INFO[0001] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0001] Starting container [rke-cp-port-listener] on host [192.168.10.10], try #1
INFO[0002] [network] Successfully started [rke-cp-port-listener] container on host [192.168.10.10]
INFO[0002] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0002] Starting container [rke-worker-port-listener] on host [192.168.10.12], try #1
INFO[0002] [network] Successfully started [rke-worker-port-listener] container on host [192.168.10.12]
INFO[0002] [network] Port listener containers deployed successfully
INFO[0002] [network] Running control plane -> etcd port checks
INFO[0002] [network] Checking if host [192.168.10.10] can connect to host(s) [192.168.10.14] on port(s) [2379], try #1
INFO[0002] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0002] Starting container [rke-port-checker] on host [192.168.10.10], try #1
INFO[0002] [network] Successfully started [rke-port-checker] container on host [192.168.10.10]
INFO[0002] Removing container [rke-port-checker] on host [192.168.10.10], try #1
INFO[0002] [network] Running control plane -> worker port checks
INFO[0002] [network] Checking if host [192.168.10.10] can connect to host(s) [192.168.10.12] on port(s) [10250], try #1
INFO[0002] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0003] Starting container [rke-port-checker] on host [192.168.10.10], try #1
INFO[0003] [network] Successfully started [rke-port-checker] container on host [192.168.10.10]
INFO[0003] Removing container [rke-port-checker] on host [192.168.10.10], try #1
INFO[0003] [network] Running workers -> control plane port checks
INFO[0003] [network] Checking if host [192.168.10.12] can connect to host(s) [192.168.10.10] on port(s) [6443], try #1
INFO[0003] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0003] Starting container [rke-port-checker] on host [192.168.10.12], try #1
INFO[0003] [network] Successfully started [rke-port-checker] container on host [192.168.10.12]
INFO[0003] Removing container [rke-port-checker] on host [192.168.10.12], try #1
INFO[0003] [network] Checking KubeAPI port Control Plane hosts
INFO[0003] [network] Removing port listener containers
INFO[0003] Removing container [rke-etcd-port-listener] on host [192.168.10.14], try #1
INFO[0003] [remove/rke-etcd-port-listener] Successfully removed container on host [192.168.10.14]
INFO[0003] Removing container [rke-cp-port-listener] on host [192.168.10.10], try #1
INFO[0003] [remove/rke-cp-port-listener] Successfully removed container on host [192.168.10.10]
INFO[0003] Removing container [rke-worker-port-listener] on host [192.168.10.12], try #1
INFO[0003] [remove/rke-worker-port-listener] Successfully removed container on host [192.168.10.12]
INFO[0003] [network] Port listener containers removed successfully
INFO[0003] [certificates] Deploying kubernetes certificates to Cluster nodes
INFO[0003] Checking if container [cert-deployer] is running on host [192.168.10.14], try #1
INFO[0003] Checking if container [cert-deployer] is running on host [192.168.10.10], try #1
INFO[0003] Checking if container [cert-deployer] is running on host [192.168.10.12], try #1
INFO[0003] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0003] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0003] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0004] Starting container [cert-deployer] on host [192.168.10.14], try #1
INFO[0004] Starting container [cert-deployer] on host [192.168.10.12], try #1
INFO[0004] Starting container [cert-deployer] on host [192.168.10.10], try #1
INFO[0004] Checking if container [cert-deployer] is running on host [192.168.10.14], try #1
INFO[0004] Checking if container [cert-deployer] is running on host [192.168.10.12], try #1
INFO[0004] Checking if container [cert-deployer] is running on host [192.168.10.10], try #1
INFO[0009] Checking if container [cert-deployer] is running on host [192.168.10.14], try #1
INFO[0009] Removing container [cert-deployer] on host [192.168.10.14], try #1
INFO[0009] Checking if container [cert-deployer] is running on host [192.168.10.12], try #1
INFO[0009] Removing container [cert-deployer] on host [192.168.10.12], try #1
INFO[0009] Checking if container [cert-deployer] is running on host [192.168.10.10], try #1
INFO[0009] Removing container [cert-deployer] on host [192.168.10.10], try #1
INFO[0009] [reconcile] Rebuilding and updating local kube config
INFO[0009] Successfully Deployed local admin kubeconfig at [./kube_config_cluster.yml]
WARN[0009] [reconcile] host [192.168.10.10] is a control plane node without reachable Kubernetes API endpoint in the cluster
WARN[0009] [reconcile] no control plane node with reachable Kubernetes API endpoint in the cluster found
INFO[0009] [certificates] Successfully deployed kubernetes certificates to Cluster nodes
INFO[0009] [file-deploy] Deploying file [/etc/kubernetes/audit-policy.yaml] to node [192.168.10.10]
INFO[0009] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0009] Starting container [file-deployer] on host [192.168.10.10], try #1
INFO[0009] Successfully started [file-deployer] container on host [192.168.10.10]
INFO[0009] Waiting for [file-deployer] container to exit on host [192.168.10.10]
INFO[0009] Waiting for [file-deployer] container to exit on host [192.168.10.10]
INFO[0009] Container [file-deployer] is still running on host [192.168.10.10]: stderr: [], stdout: []
INFO[0010] Waiting for [file-deployer] container to exit on host [192.168.10.10]
INFO[0010] Removing container [file-deployer] on host [192.168.10.10], try #1
INFO[0010] [remove/file-deployer] Successfully removed container on host [192.168.10.10]
INFO[0010] [/etc/kubernetes/audit-policy.yaml] Successfully deployed audit policy file to Cluster control nodes
INFO[0010] [reconcile] Reconciling cluster state
INFO[0010] [reconcile] This is newly generated cluster
INFO[0010] Pre-pulling kubernetes images
INFO[0010] Pulling image [rancher/hyperkube:v1.21.9-rancher1] on host [192.168.10.10], try #1
INFO[0010] Pulling image [rancher/hyperkube:v1.21.9-rancher1] on host [192.168.10.14], try #1
INFO[0010] Pulling image [rancher/hyperkube:v1.21.9-rancher1] on host [192.168.10.12], try #1
INFO[0087] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.10]
INFO[0090] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.12]
INFO[0092] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.14]
INFO[0092] Kubernetes images pulled successfully
INFO[0092] [etcd] Building up etcd plane..
INFO[0092] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0092] Starting container [etcd-fix-perm] on host [192.168.10.14], try #1
INFO[0092] Successfully started [etcd-fix-perm] container on host [192.168.10.14]
INFO[0092] Waiting for [etcd-fix-perm] container to exit on host [192.168.10.14]
INFO[0092] Waiting for [etcd-fix-perm] container to exit on host [192.168.10.14]
INFO[0092] Container [etcd-fix-perm] is still running on host [192.168.10.14]: stderr: [], stdout: []
INFO[0093] Waiting for [etcd-fix-perm] container to exit on host [192.168.10.14]
INFO[0093] Removing container [etcd-fix-perm] on host [192.168.10.14], try #1
INFO[0093] [remove/etcd-fix-perm] Successfully removed container on host [192.168.10.14]
INFO[0093] Image [rancher/mirrored-coreos-etcd:v3.5.0] exists on host [192.168.10.14]
INFO[0093] Starting container [etcd] on host [192.168.10.14], try #1
INFO[0093] [etcd] Successfully started [etcd] container on host [192.168.10.14]
INFO[0093] [etcd] Running rolling snapshot container [etcd-snapshot-once] on host [192.168.10.14]
INFO[0093] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0094] Starting container [etcd-rolling-snapshots] on host [192.168.10.14], try #1
INFO[0094] [etcd] Successfully started [etcd-rolling-snapshots] container on host [192.168.10.14]
INFO[0099] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0099] Starting container [rke-bundle-cert] on host [192.168.10.14], try #1
INFO[0099] [certificates] Successfully started [rke-bundle-cert] container on host [192.168.10.14]
INFO[0099] Waiting for [rke-bundle-cert] container to exit on host [192.168.10.14]
INFO[0099] Container [rke-bundle-cert] is still running on host [192.168.10.14]: stderr: [], stdout: []
INFO[0100] Waiting for [rke-bundle-cert] container to exit on host [192.168.10.14]
INFO[0100] [certificates] successfully saved certificate bundle [/opt/rke/etcd-snapshots//pki.bundle.tar.gz] on host [192.168.10.14]
INFO[0100] Removing container [rke-bundle-cert] on host [192.168.10.14], try #1
INFO[0100] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0100] Starting container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0100] [etcd] Successfully started [rke-log-linker] container on host [192.168.10.14]
INFO[0100] Removing container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0100] [remove/rke-log-linker] Successfully removed container on host [192.168.10.14]
INFO[0100] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0101] Starting container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0101] [etcd] Successfully started [rke-log-linker] container on host [192.168.10.14]
INFO[0101] Removing container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0101] [remove/rke-log-linker] Successfully removed container on host [192.168.10.14]
INFO[0101] [etcd] Successfully started etcd plane.. Checking etcd cluster health
INFO[0101] [etcd] etcd host [192.168.10.14] reported healthy=true
INFO[0101] [controlplane] Building up Controller Plane..
INFO[0101] Checking if container [service-sidekick] is running on host [192.168.10.10], try #1
INFO[0101] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0101] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.10]
INFO[0101] Starting container [kube-apiserver] on host [192.168.10.10], try #1
INFO[0101] [controlplane] Successfully started [kube-apiserver] container on host [192.168.10.10]
INFO[0101] [healthcheck] Start Healthcheck on service [kube-apiserver] on host [192.168.10.10]
INFO[0106] [healthcheck] service [kube-apiserver] on host [192.168.10.10] is healthy
INFO[0106] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0107] Starting container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0107] [controlplane] Successfully started [rke-log-linker] container on host [192.168.10.10]
INFO[0107] Removing container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0107] [remove/rke-log-linker] Successfully removed container on host [192.168.10.10]
INFO[0107] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.10]
INFO[0107] Starting container [kube-controller-manager] on host [192.168.10.10], try #1
INFO[0107] [controlplane] Successfully started [kube-controller-manager] container on host [192.168.10.10]
INFO[0107] [healthcheck] Start Healthcheck on service [kube-controller-manager] on host [192.168.10.10]
INFO[0112] [healthcheck] service [kube-controller-manager] on host [192.168.10.10] is healthy
INFO[0112] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0113] Starting container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0113] [controlplane] Successfully started [rke-log-linker] container on host [192.168.10.10]
INFO[0113] Removing container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0113] [remove/rke-log-linker] Successfully removed container on host [192.168.10.10]
INFO[0113] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.10]
INFO[0113] Starting container [kube-scheduler] on host [192.168.10.10], try #1
INFO[0113] [controlplane] Successfully started [kube-scheduler] container on host [192.168.10.10]
INFO[0113] [healthcheck] Start Healthcheck on service [kube-scheduler] on host [192.168.10.10]
INFO[0118] [healthcheck] service [kube-scheduler] on host [192.168.10.10] is healthy
INFO[0118] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0119] Starting container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0119] [controlplane] Successfully started [rke-log-linker] container on host [192.168.10.10]
INFO[0119] Removing container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0119] [remove/rke-log-linker] Successfully removed container on host [192.168.10.10]
INFO[0119] [controlplane] Successfully started Controller Plane..
INFO[0119] [authz] Creating rke-job-deployer ServiceAccount
INFO[0119] [authz] rke-job-deployer ServiceAccount created successfully
INFO[0119] [authz] Creating system:node ClusterRoleBinding
INFO[0119] [authz] system:node ClusterRoleBinding created successfully
INFO[0119] [authz] Creating kube-apiserver proxy ClusterRole and ClusterRoleBinding
INFO[0119] [authz] kube-apiserver proxy ClusterRole and ClusterRoleBinding created successfully
INFO[0119] Successfully Deployed state file at [./cluster.rkestate]
INFO[0119] [state] Saving full cluster state to Kubernetes
INFO[0119] [state] Successfully Saved full cluster state to Kubernetes ConfigMap: full-cluster-state
INFO[0119] [worker] Building up Worker Plane..
INFO[0119] Checking if container [service-sidekick] is running on host [192.168.10.10], try #1
INFO[0119] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0119] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0119] [sidekick] Sidekick container already created on host [192.168.10.10]
INFO[0119] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.10]
INFO[0119] Starting container [kubelet] on host [192.168.10.10], try #1
INFO[0119] [worker] Successfully started [kubelet] container on host [192.168.10.10]
INFO[0119] [healthcheck] Start Healthcheck on service [kubelet] on host [192.168.10.10]
INFO[0119] Starting container [nginx-proxy] on host [192.168.10.14], try #1
INFO[0119] [worker] Successfully started [nginx-proxy] container on host [192.168.10.14]
INFO[0119] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0119] Starting container [nginx-proxy] on host [192.168.10.12], try #1
INFO[0119] [worker] Successfully started [nginx-proxy] container on host [192.168.10.12]
INFO[0119] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0119] Starting container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0120] Starting container [rke-log-linker] on host [192.168.10.12], try #1
INFO[0120] [worker] Successfully started [rke-log-linker] container on host [192.168.10.14]
INFO[0120] Removing container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0120] [remove/rke-log-linker] Successfully removed container on host [192.168.10.14]
INFO[0120] Checking if container [service-sidekick] is running on host [192.168.10.14], try #1
INFO[0120] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0120] [worker] Successfully started [rke-log-linker] container on host [192.168.10.12]
INFO[0120] Removing container [rke-log-linker] on host [192.168.10.12], try #1
INFO[0120] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.14]
INFO[0120] [remove/rke-log-linker] Successfully removed container on host [192.168.10.12]
INFO[0120] Checking if container [service-sidekick] is running on host [192.168.10.12], try #1
INFO[0120] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0120] Starting container [kubelet] on host [192.168.10.14], try #1
INFO[0120] [worker] Successfully started [kubelet] container on host [192.168.10.14]
INFO[0120] [healthcheck] Start Healthcheck on service [kubelet] on host [192.168.10.14]
INFO[0120] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.12]
INFO[0120] Starting container [kubelet] on host [192.168.10.12], try #1
INFO[0120] [worker] Successfully started [kubelet] container on host [192.168.10.12]
INFO[0120] [healthcheck] Start Healthcheck on service [kubelet] on host [192.168.10.12]
INFO[0124] [healthcheck] service [kubelet] on host [192.168.10.10] is healthy
INFO[0124] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0124] Starting container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0125] [worker] Successfully started [rke-log-linker] container on host [192.168.10.10]
INFO[0125] Removing container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0125] [remove/rke-log-linker] Successfully removed container on host [192.168.10.10]
INFO[0125] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.10]
INFO[0125] Starting container [kube-proxy] on host [192.168.10.10], try #1
INFO[0125] [worker] Successfully started [kube-proxy] container on host [192.168.10.10]
INFO[0125] [healthcheck] Start Healthcheck on service [kube-proxy] on host [192.168.10.10]
INFO[0125] [healthcheck] service [kubelet] on host [192.168.10.14] is healthy
INFO[0125] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0125] Starting container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0125] [healthcheck] service [kubelet] on host [192.168.10.12] is healthy
INFO[0125] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0125] [worker] Successfully started [rke-log-linker] container on host [192.168.10.14]
INFO[0125] Starting container [rke-log-linker] on host [192.168.10.12], try #1
INFO[0125] Removing container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0126] [remove/rke-log-linker] Successfully removed container on host [192.168.10.14]
INFO[0126] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.14]
INFO[0126] Starting container [kube-proxy] on host [192.168.10.14], try #1
INFO[0126] [worker] Successfully started [rke-log-linker] container on host [192.168.10.12]
INFO[0126] Removing container [rke-log-linker] on host [192.168.10.12], try #1
INFO[0126] [worker] Successfully started [kube-proxy] container on host [192.168.10.14]
INFO[0126] [healthcheck] Start Healthcheck on service [kube-proxy] on host [192.168.10.14]
INFO[0126] [remove/rke-log-linker] Successfully removed container on host [192.168.10.12]
INFO[0126] Image [rancher/hyperkube:v1.21.9-rancher1] exists on host [192.168.10.12]
INFO[0126] Starting container [kube-proxy] on host [192.168.10.12], try #1
INFO[0126] [worker] Successfully started [kube-proxy] container on host [192.168.10.12]
INFO[0126] [healthcheck] Start Healthcheck on service [kube-proxy] on host [192.168.10.12]
INFO[0130] [healthcheck] service [kube-proxy] on host [192.168.10.10] is healthy
INFO[0130] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0130] Starting container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0130] [worker] Successfully started [rke-log-linker] container on host [192.168.10.10]
INFO[0130] Removing container [rke-log-linker] on host [192.168.10.10], try #1
INFO[0130] [remove/rke-log-linker] Successfully removed container on host [192.168.10.10]
INFO[0131] [healthcheck] service [kube-proxy] on host [192.168.10.14] is healthy
INFO[0131] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0131] Starting container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0131] [healthcheck] service [kube-proxy] on host [192.168.10.12] is healthy
INFO[0131] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0131] [worker] Successfully started [rke-log-linker] container on host [192.168.10.14]
INFO[0131] Removing container [rke-log-linker] on host [192.168.10.14], try #1
INFO[0131] Starting container [rke-log-linker] on host [192.168.10.12], try #1
INFO[0131] [remove/rke-log-linker] Successfully removed container on host [192.168.10.14]
INFO[0131] [worker] Successfully started [rke-log-linker] container on host [192.168.10.12]
INFO[0131] Removing container [rke-log-linker] on host [192.168.10.12], try #1
INFO[0131] [remove/rke-log-linker] Successfully removed container on host [192.168.10.12]
INFO[0131] [worker] Successfully started Worker Plane..
INFO[0131] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.12]
INFO[0131] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.14]
INFO[0131] Image [rancher/rke-tools:v0.1.78] exists on host [192.168.10.10]
INFO[0132] Starting container [rke-log-cleaner] on host [192.168.10.14], try #1
INFO[0132] Starting container [rke-log-cleaner] on host [192.168.10.12], try #1
INFO[0132] Starting container [rke-log-cleaner] on host [192.168.10.10], try #1
INFO[0132] [cleanup] Successfully started [rke-log-cleaner] container on host [192.168.10.14]
INFO[0132] Removing container [rke-log-cleaner] on host [192.168.10.14], try #1
INFO[0132] [cleanup] Successfully started [rke-log-cleaner] container on host [192.168.10.12]
INFO[0132] Removing container [rke-log-cleaner] on host [192.168.10.12], try #1
INFO[0132] [cleanup] Successfully started [rke-log-cleaner] container on host [192.168.10.10]
INFO[0132] Removing container [rke-log-cleaner] on host [192.168.10.10], try #1
INFO[0132] [remove/rke-log-cleaner] Successfully removed container on host [192.168.10.14]
INFO[0132] [remove/rke-log-cleaner] Successfully removed container on host [192.168.10.12]
INFO[0132] [remove/rke-log-cleaner] Successfully removed container on host [192.168.10.10]
INFO[0132] [sync] Syncing nodes Labels and Taints
INFO[0132] [sync] Successfully synced nodes Labels and Taints
INFO[0132] [network] Setting up network plugin: canal
INFO[0132] [addons] Saving ConfigMap for addon rke-network-plugin to Kubernetes
INFO[0132] [addons] Successfully saved ConfigMap for addon rke-network-plugin to Kubernetes
INFO[0132] [addons] Executing deploy job rke-network-plugin
INFO[0137] [addons] Setting up coredns
INFO[0137] [addons] Saving ConfigMap for addon rke-coredns-addon to Kubernetes
INFO[0137] [addons] Successfully saved ConfigMap for addon rke-coredns-addon to Kubernetes
INFO[0137] [addons] Executing deploy job rke-coredns-addon
INFO[0142] [addons] CoreDNS deployed successfully
INFO[0142] [dns] DNS provider coredns deployed successfully
INFO[0142] [addons] Setting up Metrics Server
INFO[0142] [addons] Saving ConfigMap for addon rke-metrics-addon to Kubernetes
INFO[0142] [addons] Successfully saved ConfigMap for addon rke-metrics-addon to Kubernetes
INFO[0142] [addons] Executing deploy job rke-metrics-addon
INFO[0147] [addons] Metrics Server deployed successfully
INFO[0147] [ingress] Setting up nginx ingress controller
INFO[0147] [ingress] removing admission batch jobs if they exist
INFO[0147] [addons] Saving ConfigMap for addon rke-ingress-controller to Kubernetes
INFO[0147] [addons] Successfully saved ConfigMap for addon rke-ingress-controller to Kubernetes
INFO[0147] [addons] Executing deploy job rke-ingress-controller
INFO[0152] [ingress] removing default backend service and deployment if they exist
INFO[0152] [ingress] ingress controller nginx deployed successfully
INFO[0152] [addons] Setting up user addons
INFO[0152] [addons] no user addons defined
INFO[0152] Finished building Kubernetes cluster successfully

    假如你遇到部署失败，报错：

    WARN[0114] [etcd] host [xxxxxxx] failed to check etcd health: failed to get /health for host [xxxxxxx]: Get "https://xxxxxxxx:2379/health": remote error: tls: bad certificate
FATA[0114] [etcd] Failed to bring up Etcd Plane: etcd cluster is unhealthy: hosts [xxxxxxxx] failed to report healthy. Check etcd container logs on each host for more information

    可以对所有节点执行（无法删除就重启机器）：rm -rf /etc/kubernetes/ /var/lib/kubelet/ /var/lib/etcd/。

    九、安装 kubectl 客户端

    还是在 node1（控制节点）主机上操作。

    kubectl 客户端安装

    # wget https://storage.googleapis.com/kubernetes-release/release/v1.21.9/bin/linux/amd64/kubectl
# chmod +x kubectl 
# mv kubectl /usr/local/bin/kubectl
# kubectl version --client
Client Version: version.Info{Major:"1", Minor:"21", GitVersion:"v1.21.9", GitCommit:"f59f5c2fda36e4036b49ec027e556a15456108f0", GitTreeState:"clean", BuildDate:"2022-01-19T17:33:06Z", GoVersion:"go1.16.12", Compiler:"gc", Platform:"linux/amd64"}

    kubectl 客户端配置集群管理文件及应用验证

    [root@node1 ~]# ls /app/rancher/
cluster.rkestate  cluster.yml  kube_config_cluster.yml
[root@node1 ~]# mkdir ./.kube
[root@node1 ~]# cp /app/rancher/kube_config_cluster.yml /root/.kube/config
[root@node1 ~]# kubectl get nodes
NAME            STATUS   ROLES          AGE     VERSION
192.168.10.10   Ready    controlplane   9m13s   v1.21.9
192.168.10.12   Ready    worker         9m12s   v1.21.9
192.168.10.14   Ready    etcd           9m12s   v1.21.9
[root@node1 ~]# kubectl get pods -n kube-system
NAME                                         READY   STATUS      RESTARTS   AGE
calico-kube-controllers-5685fbd9f7-gcwj7     1/1     Running     0          9m36s
canal-fz2bg                                  2/2     Running     0          9m36s
canal-qzw4n                                  2/2     Running     0          9m36s
canal-sstjn                                  2/2     Running     0          9m36s
coredns-8578b6dbdd-ftnf6                     1/1     Running     0          9m30s
coredns-autoscaler-f7b68ccb7-fzdgc           1/1     Running     0          9m30s
metrics-server-6bc7854fb5-kwppz              1/1     Running     0          9m25s
rke-coredns-addon-deploy-job--1-x56w2        0/1     Completed   0          9m31s
rke-ingress-controller-deploy-job--1-wzp2b   0/1     Completed   0          9m21s
rke-metrics-addon-deploy-job--1-ltlgn        0/1     Completed   0          9m26s
rke-network-plugin-deploy-job--1-nsbfn       0/1     Completed   0          9m41s

    十、集群 Web 管理 Rancher

    Rancher 控制面板主要方便用于控制 K8s 集群，查看集群状态，编辑集群等操作。

    依旧在（控制节点）node1 运行以下命令：

    使用 docker run 启动一个 rancher

    # 注意映射端口改了
[root@node1 ~]# docker run -d --restart=unless-stopped --privileged --name rancher -p 1080:80 -p 1443:443 rancher/rancher:v2.5.9
[root@node1 ~]# docker ps
CONTAINER ID   IMAGE                                COMMAND                  CREATED          STATUS          PORTS                                                                      NAMES
0fd46ee77655   rancher/rancher:v2.5.9               "entrypoint.sh"          5 seconds ago    Up 3 seconds    0.0.0.0:80->80/tcp, :::80->80/tcp, 0.0.0.0:443->443/tcp, :::443->443/tcp   rancher

    访问 Rancher【这里映射端口 1080，1443】

    [root@node1 ~]# ss -anput | grep ":1080"
tcp    LISTEN     0      128       *:1080                    *:*                   users:(("docker-proxy",pid=29564,fd=4))
tcp    LISTEN     0      128    [::]:1080                 [::]:*                   users:(("docker-proxy",pid=29570,fd=4))

    以上便是 RKE 方式搭建 K8s 集群。

    下面来讲讲，如何搞定 NebulaGraph 部署。

    十一、搭建 NFS 服务器

    [root@nfsserver ~]# mkdir -p /data/nfs
[root@nfsserver ~]# vim /etc/exports
/data/nfs       *(rw,no_root_squash,sync)

    在所有节点中安装 NFS 客户端：

    yum install nfs-utils -y

    下面在工作节点中验证是否服务可用：

    showmount -e 192.168.222.143 #NFS 服务器的地址

    十二、使用 NFS 文件系统创建存储动态供给（Storage Class 安装）

    PV 对存储系统的支持可通过其插件来实现，目前，Kubernetes 支持如下类型的插件。

    官方地址：https://kubernetes.io/docs/concepts/storage/storage-classes/；

    但是，官方插件是不支持 NFS 动态供给的，我们可以用第三方的插件来实现，第三方插件地址：https://github.com/kubernetes-retired/external-storage。

    下载并创建 Storage Class

    [root@k8s-master1 ~]# wget https://raw.githubusercontent.com/kubernetes-sigs/nfs-subdir-external-provisioner/master/deploy/class.yaml

[root@k8s-master1 ~]# mv class.yaml storageclass-nfs.yml
[root@k8s-master1 ~]# cat storageclass-nfs.yml
apiVersion: storage.k8s.io/v1
kind: StorageClass                                # 类型
metadata:
  name: nfs-client                # 名称，要使用就需要调用此名称
provisioner: k8s-sigs.io/nfs-subdir-external-provisioner         # 动态供给插件
parameters:
  archiveOnDelete: "false"                # 删除数据时是否存档，false 表示不存档，true 表示存档
[root@k8s-master1 ~]# kubectl apply -f storageclass-nfs.yml
storageclass.storage.k8s.io/managed-nfs-storage created
[root@k8s-master1 ~]# kubectl get storageclass
NAME         PROVISIONER                                   RECLAIMPOLICY   VOLUMEBINDINGMODE   ALLOWVOLUMEEXPANSION   AGE
nfs-client   k8s-sigs.io/nfs-subdir-external-provisioner   Delete          Immediate           false                  10s

# RECLAIMPOLICY PV 回收策略，Pod 或 PVC 被删除后，PV 是否删除还是保留。
# VOLUMEBINDINGMODE Immediate 模式下 PVC 与 PV 立即绑定，主要是不等待相关 Pod 调度完成，不关心其运行节点，直接完成绑定。相反的 WaitForFirstConsumer 模式下需要等待 Pod 调度完成后进行 PV 绑定。
# ALLOWVOLUMEEXPANSION PVC 扩容

    下载并创建 RBAC

    因为 Storage 自动创建 PV 需要经过 kube-apiserver，所以需要授权。

    [root@k8s-master1 ~]# wget https://raw.githubusercontent.com/kubernetes-sigs/nfs-subdir-external-provisioner/master/deploy/rbac.yaml

[root@k8s-master1 ~]# mv rbac.yaml storageclass-nfs-rbac.yaml
[root@k8s-master1 ~]# cat storageclass-nfs-rbac.yaml
apiVersion: v1
kind: ServiceAccount
metadata:
  name: nfs-client-provisioner
  # replace with namespace where provisioner is deployed
  namespace: default
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: nfs-client-provisioner-runner
rules:
  - apiGroups: [""]
    resources: ["persistentvolumes"]
    verbs: ["get", "list", "watch", "create", "delete"]
  - apiGroups: [""]
    resources: ["persistentvolumeclaims"]
    verbs: ["get", "list", "watch", "update"]
  - apiGroups: ["storage.k8s.io"]
    resources: ["storageclasses"]
    verbs: ["get", "list", "watch"]
  - apiGroups: [""]
    resources: ["events"]
    verbs: ["create", "update", "patch"]
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: run-nfs-client-provisioner
subjects:
  - kind: ServiceAccount
    name: nfs-client-provisioner
    # replace with namespace where provisioner is deployed
    namespace: default
roleRef:
  kind: ClusterRole
  name: nfs-client-provisioner-runner
  apiGroup: rbac.authorization.k8s.io
---
kind: Role
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: leader-locking-nfs-client-provisioner
  # replace with namespace where provisioner is deployed
  namespace: default
rules:
  - apiGroups: [""]
    resources: ["endpoints"]
    verbs: ["get", "list", "watch", "create", "update", "patch"]
---
kind: RoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: leader-locking-nfs-client-provisioner
  # replace with namespace where provisioner is deployed
  namespace: default
subjects:
  - kind: ServiceAccount
    name: nfs-client-provisioner
    # replace with namespace where provisioner is deployed
    namespace: default
roleRef:
  kind: Role
  name: leader-locking-nfs-client-provisioner
  apiGroup: rbac.authorization.k8s.io
[root@k8s-master1 ~]# kubectl apply -f rbac.yaml
serviceaccount/nfs-client-provisioner created
clusterrole.rbac.authorization.k8s.io/nfs-client-provisioner-runner created
clusterrolebinding.rbac.authorization.k8s.io/run-nfs-client-provisioner created
role.rbac.authorization.k8s.io/leader-locking-nfs-client-provisioner created
rolebinding.rbac.authorization.k8s.io/leader-locking-nfs-client-provisioner created

    创建动态供给的 deployment

    这里需要一个 deployment 来专门实现 PV 与 PVC 的自动创建：

    [root@k8s-master1 ~]# vim deploy-nfs-client-provisioner.yml
apiVersion: apps/v1
kind: Deployment
metadata:
  name: nfs-client-provisioner
spec:
  replicas: 1
  strategy:
    type: Recreate
  selector:
    matchLabels:
      app: nfs-client-provisioner
  template:
    metadata:
      labels:
        app: nfs-client-provisioner
    spec:
      serviceAccount: nfs-client-provisioner
      containers:
        - name: nfs-client-provisioner
          image: registry.cn-beijing.aliyuncs.com/pylixm/nfs-subdir-external-provisioner:v4.0.0
          volumeMounts:
            - name: nfs-client-root
              mountPath: /persistentvolumes
          env:
            - name: PROVISIONER_NAME
              value: k8s-sigs.io/nfs-subdir-external-provisioner
            - name: NFS_SERVER
              value: 192.168.10.129
            - name: NFS_PATH
              value: /data/nfs
      volumes:
        - name: nfs-client-root
          nfs:
            server: 192.168.10.129
            path: /data/nfs
[root@k8s-master1 ~]# kubectl apply -f deploy-nfs-client-provisioner.yml
deployment.apps/nfs-client-provisioner created
[root@k8s-master1 ~]# kubectl get pods |grep nfs-client-provisioner
nfs-client-provisioner-5b5ddcd6c8-b6zbq   1/1     Running   0          34s

    十三、NebulaGraph Operator 安装部署

    这里参考官方文档来安装 NebulaGraph Operator 前，用户需要安装以下软件并确保安装版本的正确性（NebulaGraph Operator 不负责处理安装这些软件过程中出现的问题）。

    软件版本要求
    Kubernetes>= 1.16
    Helm>= 3.2.0
    CoreDNS>= 1.6.0

    这里需要安装下 Helm：

    [root@a ~]# curl https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3 | bash
% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                Dload  Upload   Total   Spent    Left  Speed
100 11345  100 11345    0     0  18830      0 --:--:-- --:--:-- --:--:-- 18845
[WARNING] Could not find git. It is required for plugin installation.
Downloading https://get.helm.sh/helm-v3.12.1-linux-amd64.tar.gz
Verifying checksum... Done.
Preparing to install helm into /usr/local/bin
helm installed into /usr/local/bin/helm

    而 CoreDNS 的安装，可以网上查阅资料，其实上面 RKE 安装过程中已经安装了 CoreDNS。
    再来一遍安装 NebulaGraph Operator 的具体流程：

    第一步，添加 NebulaGraph Operator Helm 仓库。

    helm repo add nebula-operator https://vesoft-inc.github.io/nebula-operator/charts

    第二步，拉取最新的 Operator Helm 仓库。

    helm repo update

    参考 Helm 仓库 以获取更多 helm repo 相关信息。

    第三步，创建命名空间用于安装 NebulaGraph Operator。

    kubectl create namespace <namespace_name>

    例如，创建 operator 命名空间。

    kubectl create namespace operator
    • nebula-operator Chart 中的所有资源都会安装在该命名空间下。
    • 用户也可自行创建其他命名空间。

    第四步，安装 NebulaGraph Operator。

    helm install nebula-operator nebula-operator/nebula-operator --namespace=<namespace_name> --version=${chart_version}

    目前 1.5.0 无法安装，可以不指定版本，默认安装最新版本。由于 gcr.io 无法下载镜像使用 kubesphere/kube-rbac-proxy:v0.8.0 代替。

    helm install nebula-operator nebula-operator/nebula-operator --namespace=nebula-operator-system --set image.kubeRBACProxy.image=kubesphere/kube-rbac-proxy:v0.8.0

    卸载 NebulaGraph Operator（如果需要卸载重新安装）

    1. 卸载 NebulaGraph Operator chart
    helm uninstall nebula-operator --namespace=operator
    1. 删除 CRD
    kubectl delete crd nebulaclusters.apps.nebula-graph.io

    十四、部署 NebulaGraph（kubectl）

    创建集群配置文件：创建名为 apps_v1alpha1_nebulacluster.yaml 的文件。官网提供了模板可以直接下载：

    apiVersion: apps.nebula-graph.io/v1alpha1
kind: NebulaCluster
metadata:
  name: nebula
spec:
  graphd:
    resources:
      requests:
        cpu: "500m"
        memory: "500Mi"
      limits:
        cpu: "1"
        memory: "1Gi"
    replicas: 1
    image: vesoft/nebula-graphd
    version: v3.5.0
    service:
      type: NodePort
      externalTrafficPolicy: Local
    logVolumeClaim:
      resources:
        requests:
          storage: 1Gi
      storageClassName: managed-nfs-storage
 metad:
  #    license:
   #      secretName: "nebula-license"
#      licenseKey: "nebula.license"
    resources:
      requests:
        cpu: "500m"
        memory: "500Mi"
      limits:
        cpu: "1"
        memory: "1Gi"
    replicas: 1
    image: vesoft/nebula-metad
    version: v3.5.0
    dataVolumeClaim:
      resources:
        requests:
          storage: 5Gi
      storageClassName:  managed-nfs-storage
    logVolumeClaim:
      resources:
        requests:
          storage: 1Gi
      storageClassName:  managed-nfs-storage
  storaged:
    resources:
      requests:
        cpu: "500m"
        memory: "500Mi"
      limits:
        cpu: "1"

    注意：所有的 storageClassName 需要和上面安装 storageclass 时名称相同。即，storageclass-nfs.yml 中的 metadata.name: nfs-client。

    来查看下服务状态：

    nebula-exporter-66457984-w6zpn            1/1     Running   0          31m
nebula-graphd-0                           2/2     Running   0          31m
nebula-metad-0                            2/2     Running   0          35m
nebula-storaged-0                         2/2     Running   0          35m
nebula-storaged-1                         0/2     Pending   0          35m
nebula-storaged-2                         0/2     Pending   0          35m
nfs-client-provisioner-6bd7f48698-m4v94   1/1     Running   0          57m

    十五、连接 NebulaGraph

    按照官网提供的模板修改：

    apiVersion: v1
kind: Service
metadata:
  labels:
    # modify the cluster name
    app.kubernetes.io/cluster: "nebula"
    app.kubernetes.io/component: graphd
    app.kubernetes.io/managed-by: nebula-operator
    app.kubernetes.io/name: nebula-graph
  name: nebula-graphd-nodeport-svc
  namespace: default
spec:
  externalTrafficPolicy: Cluster #改为local，无法连接到数据库，这里改为Cluster
  ports:
  - name: thrift
    port: 9669
    protocol: TCP
    targetPort: 9669
  - name: http
    port: 19669
    protocol: TCP
    targetPort: 19669
  selector:
    # modify the cluster name
    app.kubernetes.io/cluster: "nebula"
    app.kubernetes.io/component: graphd
    app.kubernetes.io/managed-by: nebula-operator
    app.kubernetes.io/name: nebula-graph
  type: NodePort

    执行以下命令使 Service 服务在集群中生效。

    kubectl create -f graphd-nodeport-service.yaml

    查看 Service 中 NebulaGraph 映射至集群节点的端口。

    kubectl get services -l app.kubernetes.io/cluster=<nebula>  #<nebula>为变量值，请用实际集群名称替换。

    返回：

    NAME                           TYPE        CLUSTER-IP     EXTERNAL-IP   PORT(S)                                          AGE
nebula-graphd-svc-nodeport     NodePort    10.107.153.129 <none>        9669:32236/TCP,19669:31674/TCP,19670:31057/TCP   24h
...

    NodePort 类型的 Service 中，映射至集群节点的端口为 32236。

    使用节点 IP 和上述映射的节点端口连接 NebulaGraph。

    kubectl run -ti --image vesoft/nebula-console:v3.5.0 --restart=Never -- <nebula_console_name> -addr <node_ip> -port <node_port> -u <username> -p <password>

    示例如下：

    kubectl run -ti --image vesoft/nebula-console:v3.5.0 --restart=Never -- nebula-console -addr 192.168.8.24 -port 32236 -u root -p vesoft
If you don't see a command prompt, try pressing enter.

(root@nebula) [(none)]>
    • --image：为连接 NebulaGraph 的工具 NebulaGraph Console 的镜像。
    • <nebula-console>：自定义的 Pod 名称，本示例为 nebula-console。
    • -addr：NebulaGraph 集群中任一节点 IP 地址，本示例为 192.168.8.24。
    • -port：NebulaGraph 映射至节点的端口，本示例为 32236。
    • -u：NebulaGraph 账号的用户名。未启用身份认证时，可以使用任意已存在的用户名（默认为 root）。
    • -p：用户名对应的密码。未启用身份认证时，密码可以填写任意字符。
      以上为本次实践，有任何问题欢迎论坛留言交流。

    参考资料：

    谢谢你读完本文 (///▽///)

    如果你想尝鲜图数据库 NebulaGraph，记得去 GitHub 下载、使用、(^з^)-☆ star 它 -> GitHub；和其他的 NebulaGraph 用户一起交流图数据库技术和应用技能，留下「你的名片」一起玩耍呀~

    图数据库nebula
    NebulaGraph
    169 声望686 粉丝

    NebulaGraph：一个开源的分布式图数据库。欢迎来 GitHub 交流：[链接]

    « 上一篇
    图技术在 LLM 下的应用：知识图谱驱动的大语言模型 Llama Index
    下一篇 »
    Jupyter Notebook 遇上 NebulaGraph，可视化探索图数据库

    引用和评论

    推荐阅读
    头像
    来领《黑神话：悟空》！NebulaGraph 用户案例征集ing

    NebulaGraph阅读 3.4k

    头像
    枫清·天枢多模态智能引擎 V2.1.2 版本正式发布！

    Fabarta阅读 143

    0 条评论
    得票最新