Dolphinscheduler Worker模块源码剖析

1、Worker接收Master RPC请求架构图

Worker服务的Netty提供和Master JDK 动态代理接口调用，请参考 Dolphinscheduler 告警模块解说，不再重复的说

简说 :
org.apache.dolphinscheduler.extract.worker.ITaskInstanceOperator

@RpcService
public interface ITaskInstanceOperator {

    @RpcMethod
    TaskInstanceDispatchResponse dispatchTask(TaskInstanceDispatchRequest taskInstanceDispatchRequest);

    @RpcMethod
    TaskInstanceKillResponse killTask(TaskInstanceKillRequest taskInstanceKillRequest);

    @RpcMethod
    TaskInstancePauseResponse pauseTask(TaskInstancePauseRequest taskPauseRequest);

    @RpcMethod
    UpdateWorkflowHostResponse updateWorkflowInstanceHost(UpdateWorkflowHostRequest updateWorkflowHostRequest);
}

对实现了@RpcService的接口和@RpcMethod的方法，进行Worker的Netty handler注入和Master动态代理实现

2、分发任务(TaskInstanceDispatchOperationFunction)

2.1、WorkerConfig

WorkerConfig : 其实就是从Worker模块下 application.yaml 下读取 worker 开头的配置

2.2、WorkerTaskExecutorFactoryBuilder

WorkerTaskExecutorFactoryBuilder : 是任务执行器工厂的构造器，里面封装了 DefaultWorkerTaskExecutorFactory(默认Worker任务执行器工厂) ，DefaultWorkerTaskExecutorFactory工厂又封装了 DefaultWorkerTaskExecutor 的创建。DefaultWorkerTaskExecutor 的父类是WorkerTaskExecutor，WorkerTaskExecutor又是一个线程。好玩不？

2.3、WorkerTaskExecutorThreadPool

WorkerTaskExecutorThreadPool : 其实就是Fixed线程池的封装而已

2.4、从operator开始说

public TaskInstanceDispatchResponse operate(TaskInstanceDispatchRequest taskInstanceDispatchRequest) {
    log.info("Receive TaskInstanceDispatchRequest: {}", taskInstanceDispatchRequest);
    // TODO 任务执行上下文
    TaskExecutionContext taskExecutionContext = taskInstanceDispatchRequest.getTaskExecutionContext();
    try {
        // TODO 设置worker地址
        taskExecutionContext.setHost(workerConfig.getWorkerAddress());
        // TODO 设置task日志存放路径
        taskExecutionContext.setLogPath(LogUtils.getTaskInstanceLogFullPath(taskExecutionContext));

        // TODO MDC中设置流程实例id和任务实例id，好像只是put，没有get使用
        LogUtils.setWorkflowAndTaskInstanceIDMDC(
                taskExecutionContext.getProcessInstanceId(),
                taskExecutionContext.getTaskInstanceId());

        // check server status, if server is not running, return failed to reject this task
        if (!ServerLifeCycleManager.isRunning()) {
            log.error("server is not running. reject task: {}", taskExecutionContext.getProcessInstanceId());
            return TaskInstanceDispatchResponse.failed(taskExecutionContext.getTaskInstanceId(),
                    "server is not running");
        }

        TaskMetrics.incrTaskTypeExecuteCount(taskExecutionContext.getTaskType());

        // TODO 通过WorkerTaskExecutorFactoryBuilder创建了一个WorkerTaskExecutor
        WorkerTaskExecutor workerTaskExecutor = workerTaskExecutorFactoryBuilder
                .createWorkerTaskExecutorFactory(taskExecutionContext)
                .createWorkerTaskExecutor();
        // todo: hold the workerTaskExecutor
        // TODO 直接进行任务的提交
        if (!workerTaskExecutorThreadPool.submitWorkerTaskExecutor(workerTaskExecutor)) {
            log.info("Submit task: {} to wait queue failed", taskExecutionContext.getTaskName());
            return TaskInstanceDispatchResponse.failed(taskExecutionContext.getTaskInstanceId(),
                    "WorkerManagerThread is full");
        } else {
            log.info("Submit task: {} to wait queue success", taskExecutionContext.getTaskName());
            return TaskInstanceDispatchResponse.success(taskExecutionContext.getTaskInstanceId());
        }
    } finally {
        LogUtils.removeWorkflowAndTaskInstanceIdMDC();
    }
}

LogUtils.getTaskInstanceLogFullPath(taskExecutionContext) 解析
org.apache.dolphinscheduler.plugin.task.api.utils.LogUtils#getTaskInstanceLogFullPath : 获取任务日志的全路径

/**
     * Get task instance log full path.
     *
     * @param taskExecutionContext task execution context.
     * @return task instance log full path.
     */
    public static String getTaskInstanceLogFullPath(TaskExecutionContext taskExecutionContext) {
        return getTaskInstanceLogFullPath(
                DateUtils.timeStampToDate(taskExecutionContext.getFirstSubmitTime()),
                taskExecutionContext.getProcessDefineCode(),
                taskExecutionContext.getProcessDefineVersion(),
                taskExecutionContext.getProcessInstanceId(),
                taskExecutionContext.getTaskInstanceId());
    }

org.apache.dolphinscheduler.plugin.task.api.utils.LogUtils#getTaskInstanceLogFullPath : 拼接出任务日志的全路径

/**
     * todo: Remove the submitTime parameter?
     * The task instance log full path, the path is like:{log.base}/{taskSubmitTime}/{workflowDefinitionCode}/{workflowDefinitionVersion}/{}workflowInstance}/{taskInstance}.log
     *
     * @param taskFirstSubmitTime       task first submit time
     * @param workflowDefinitionCode    workflow definition code
     * @param workflowDefinitionVersion workflow definition version
     * @param workflowInstanceId        workflow instance id
     * @param taskInstanceId            task instance id.
     * @return task instance log full path.
     */
    public static String getTaskInstanceLogFullPath(Date taskFirstSubmitTime,
                                                    Long workflowDefinitionCode,
                                                    int workflowDefinitionVersion,
                                                    int workflowInstanceId,
                                                    int taskInstanceId) {
        if (TASK_INSTANCE_LOG_BASE_PATH == null) {
            throw new IllegalArgumentException(
                    "Cannot find the task instance log base path, please check your logback.xml file");
        }
        final String taskLogFileName = Paths.get(
                String.valueOf(workflowDefinitionCode),
                String.valueOf(workflowDefinitionVersion),
                String.valueOf(workflowInstanceId),
                String.format("%s.log", taskInstanceId)).toString();
        return TASK_INSTANCE_LOG_BASE_PATH
                .resolve(DateUtils.format(taskFirstSubmitTime, DateConstants.YYYYMMDD, null))
                .resolve(taskLogFileName)
                .toString();
    }

org.apache.dolphinscheduler.plugin.task.api.utils.LogUtils#getTaskInstanceLogBasePath : 读取logback-spring.xml中的配置，获取任务实例日志的基础路径，其实就是获取根目录下/logs为基础路径

/**
     * Get task instance log base absolute path, this is defined in logback.xml
     *
     * @return
     */
    public static Path getTaskInstanceLogBasePath() {
        return Optional.of(LoggerFactory.getILoggerFactory())
                .map(e -> (AppenderAttachable<ILoggingEvent>) (e.getLogger("ROOT")))
                .map(e -> (SiftingAppender) (e.getAppender("TASKLOGFILE")))
                .map(e -> ((TaskLogDiscriminator) (e.getDiscriminator())))
                .map(TaskLogDiscriminator::getLogBase)
                .map(e -> Paths.get(e).toAbsolutePath())
                .orElse(null);
    }

worker的 logback-spring.xml :

<configuration scan="true" scanPeriod="120 seconds">
  <property name="log.base" value="logs"/>
  ...
  <appender name="TASKLOGFILE" class="ch.qos.logback.classic.sift.SiftingAppender">
          <filter class="org.apache.dolphinscheduler.plugin.task.api.log.TaskLogFilter"/>
          <Discriminator class="org.apache.dolphinscheduler.plugin.task.api.log.TaskLogDiscriminator">
              <key>taskInstanceLogFullPath</key>
              <logBase>${log.base}</logBase>
          </Discriminator>
          <sift>
              <appender name="FILE-${taskInstanceLogFullPath}" class="ch.qos.logback.core.FileAppender">
                  <file>${taskInstanceLogFullPath}</file>
                  <encoder>
                      <pattern>
                          [%level] %date{yyyy-MM-dd HH:mm:ss.SSS Z} - %message%n
                      </pattern>
                      <charset>UTF-8</charset>
                  </encoder>
                  <append>true</append>
              </appender>
          </sift>
      </appender>
  ...
  <root level="INFO">
      <appender-ref ref="STDOUT"/>
      <appender-ref ref="TASKLOGFILE"/>
  </root>

</configuration>

最终地址是 :

/opt/dolphinscheduler/worker-server/logs/20240615/13929490938784/1/1815/1202.log

示例参考 : https://segmentfault.com/a/1190000044967912

2.5、DefaultWorkerTaskExecutor解说

org.apache.dolphinscheduler.server.worker.runner.operator.TaskInstanceDispatchOperationFunction#operate

...
// TODO 通过WorkerTaskExecutorFactoryBuilder创建了一个WorkerTaskExecutor
            WorkerTaskExecutor workerTaskExecutor = workerTaskExecutorFactoryBuilder
                    .createWorkerTaskExecutorFactory(taskExecutionContext)
                    .createWorkerTaskExecutor();
            // todo: hold the workerTaskExecutor
            // TODO 直接进行任务的提交
            if (!workerTaskExecutorThreadPool.submitWorkerTaskExecutor(workerTaskExecutor)) {
                log.info("Submit task: {} to wait queue failed", taskExecutionContext.getTaskName());
                return TaskInstanceDispatchResponse.failed(taskExecutionContext.getTaskInstanceId(),
                        "WorkerManagerThread is full");
            } else {
                log.info("Submit task: {} to wait queue success", taskExecutionContext.getTaskName());
                return TaskInstanceDispatchResponse.success(taskExecutionContext.getTaskInstanceId());
            }
...

直接使用 workerTaskExecutorThreadPool.submitWorkerTaskExecutor(workerTaskExecutor) 进行任务的提交

WorkerTaskExecutor 是一个线程，既然是线程，是不是要看一下run :

public void run() {
        try {
            // TODO MDC中设置流程实例和任务实例，其实就相当于是ThreadLocal使用一样
            LogUtils.setWorkflowAndTaskInstanceIDMDC(
                    taskExecutionContext.getProcessInstanceId(),
                    taskExecutionContext.getTaskInstanceId());

            // TODO MDC中设置任务的日志路径
            LogUtils.setTaskInstanceLogFullPathMDC(taskExecutionContext.getLogPath());

            // TODO 打印任务的头部
            TaskInstanceLogHeader.printInitializeTaskContextHeader();

            // TODO 进行任务的初始化，其实就是做了任务的开始时间和taskAppId(流程实例id + 任务实例id)
            initializeTask();

            // TODO DRY_RUN其实就是空跑，其实就是直接设置状态为成功
            if (DRY_RUN_FLAG_YES == taskExecutionContext.getDryRun()) {
                taskExecutionContext.setCurrentExecutionStatus(TaskExecutionStatus.SUCCESS);
                taskExecutionContext.setEndTime(System.currentTimeMillis());
                WorkerTaskExecutorHolder.remove(taskExecutionContext.getTaskInstanceId());
                // TODO 通过worker消息发送器将结果信息发送过去
                workerMessageSender.sendMessageWithRetry(taskExecutionContext,
                        ITaskInstanceExecutionEvent.TaskInstanceExecutionEventType.FINISH);
                log.info(
                        "The current execute mode is dry run, will stop the subsequent process and set the taskInstance status to success");
                return;
            }
            // TODO 打印任务插件的头部
            TaskInstanceLogHeader.printLoadTaskInstancePluginHeader();

            // TODO 执行之前
            beforeExecute();

            // TODO 回调函数
            TaskCallBack taskCallBack = TaskCallbackImpl.builder()
                    .workerMessageSender(workerMessageSender)
                    .taskExecutionContext(taskExecutionContext)
                    .build();

            TaskInstanceLogHeader.printExecuteTaskHeader();
            // TODO 执行
            executeTask(taskCallBack);

            TaskInstanceLogHeader.printFinalizeTaskHeader();

            // TODO 执行之后
            afterExecute();

            closeLogAppender();
        } catch (Throwable ex) {
            log.error("Task execute failed, due to meet an exception", ex);
            afterThrowing(ex);
            closeLogAppender();
        } finally {
            LogUtils.removeWorkflowAndTaskInstanceIdMDC();
            LogUtils.removeTaskInstanceLogFullPathMDC();
        }
    }

重点分析 :

2.5.1、空跑

如果是空跑，任务直接成功，不执行

// TODO DRY_RUN其实就是空跑，其实就是直接设置状态为成功
            if (DRY_RUN_FLAG_YES == taskExecutionContext.getDryRun()) {
                taskExecutionContext.setCurrentExecutionStatus(TaskExecutionStatus.SUCCESS);
                taskExecutionContext.setEndTime(System.currentTimeMillis());
                WorkerTaskExecutorHolder.remove(taskExecutionContext.getTaskInstanceId());
                // TODO 通过worker消息发送器将结果信息发送过去
                workerMessageSender.sendMessageWithRetry(taskExecutionContext,
                        ITaskInstanceExecutionEvent.TaskInstanceExecutionEventType.FINISH);
                log.info(
                        "The current execute mode is dry run, will stop the subsequent process and set the taskInstance status to success");
                return;
            }

2.5.2、 beforeExecute()

执行之前的准备工作，比如说给Master汇报说自己正在运行、创建租户(linux上用户)、创建工作路径、下载所需资源文件、任务初始化**

protected void beforeExecute() {
        // TODO 先设置为RUNNING状态
        taskExecutionContext.setCurrentExecutionStatus(TaskExecutionStatus.RUNNING_EXECUTION);
        // TODO 向Master发送消息，告诉Master这个任务正在运行
        workerMessageSender.sendMessageWithRetry(taskExecutionContext,
                ITaskInstanceExecutionEvent.TaskInstanceExecutionEventType.RUNNING);
        log.info("Send task status {} master: {}", TaskExecutionStatus.RUNNING_EXECUTION.name(),
                taskExecutionContext.getWorkflowInstanceHost());

        // In most of case the origin tenant is the same as the current tenant
        // Except `default` tenant. The originTenant is used to download the resources
        // TODO 租户信息
        String originTenant = taskExecutionContext.getTenantCode();
        String tenant = TaskExecutionContextUtils.getOrCreateTenant(workerConfig, taskExecutionContext);
        taskExecutionContext.setTenantCode(tenant);
        log.info("TenantCode: {} check successfully", taskExecutionContext.getTenantCode());

        // TODO 创建工作路径
        TaskExecutionContextUtils.createTaskInstanceWorkingDirectory(taskExecutionContext);
        log.info("WorkflowInstanceExecDir: {} check successfully", taskExecutionContext.getExecutePath());

        TaskChannel taskChannel =
                Optional.ofNullable(taskPluginManager.getTaskChannelMap().get(taskExecutionContext.getTaskType()))
                        .orElseThrow(() -> new TaskPluginException(taskExecutionContext.getTaskType()
                                + " task plugin not found, please check the task type is correct."));

        log.info("Create TaskChannel: {} successfully", taskChannel.getClass().getName());

        // TODO 下载资源
        ResourceContext resourceContext = TaskExecutionContextUtils.downloadResourcesIfNeeded(originTenant, taskChannel,
                storageOperate, taskExecutionContext);

        taskExecutionContext.setResourceContext(resourceContext);
        log.info("Download resources successfully: \n{}", taskExecutionContext.getResourceContext());

        TaskFilesTransferUtils.downloadUpstreamFiles(taskExecutionContext, storageOperate);
        log.info("Download upstream files: {} successfully",
                TaskFilesTransferUtils.getFileLocalParams(taskExecutionContext, Direct.IN));

        // TODO 创建任务
        task = taskChannel.createTask(taskExecutionContext);
        log.info("Task plugin instance: {} create successfully", taskExecutionContext.getTaskType());

        // todo: remove the init method, this should initialize in constructor method
        // TODO 任务进行初始化
        task.init();
        log.info("Success initialized task plugin instance successfully");

        task.getParameters().setVarPool(taskExecutionContext.getVarPool());
        log.info("Set taskVarPool: {} successfully", taskExecutionContext.getVarPool());
    }

1、日志打印

log.info("Send task status {} master: {}", TaskExecutionStatus.RUNNING_EXECUTION.name(),
                taskExecutionContext.getWorkflowInstanceHost());
这里需要打印的是 taskExecutionContext.getWorkflowInstanceHost()，不应该是taskExecutionContext.getHost()。就是说你给Master汇报信息的呢，打印自己Worker节点的host干啥(自己肯定知道啊)，有用的是当前Worker节点是给哪个Master节点汇报自己的任务状态的

2、创建租户
org.apache.dolphinscheduler.server.worker.utils.TaskExecutionContextUtils#getOrCreateTenant

public static String getOrCreateTenant(WorkerConfig workerConfig, TaskExecutionContext taskExecutionContext) {
        try {
            TenantConfig tenantConfig = workerConfig.getTenantConfig();

            String tenantCode = taskExecutionContext.getTenantCode();
            if (TenantConstants.DEFAULT_TENANT_CODE.equals(tenantCode) && tenantConfig.isDefaultTenantEnabled()) {
                log.info("Current tenant is default tenant, will use bootstrap user: {} to execute the task",
                        TenantConstants.BOOTSTRAPT_SYSTEM_USER);
                return TenantConstants.BOOTSTRAPT_SYSTEM_USER;
            }
            boolean osUserExistFlag;
            // if Using distributed is true and Currently supported systems are linux,Should not let it
            // automatically
            // create tenants,so TenantAutoCreate has no effect
            if (tenantConfig.isDistributedTenantEnabled() && SystemUtils.IS_OS_LINUX) {
                // use the id command to judge in linux
                osUserExistFlag = OSUtils.existTenantCodeInLinux(tenantCode);
            } else if (OSUtils.isSudoEnable() && tenantConfig.isAutoCreateTenantEnabled()) {
                // if not exists this user, then create
                // TODO 默认走的是这里的分支，直接通过 sudo useradd -g %s %s 进行创建
                OSUtils.createUserIfAbsent(tenantCode);
                osUserExistFlag = OSUtils.getUserList().contains(tenantCode);
            } else {
                osUserExistFlag = OSUtils.getUserList().contains(tenantCode);
            }
            if (!osUserExistFlag) {
                throw new TaskException(String.format("TenantCode: %s doesn't exist", tenantCode));
            }
            return tenantCode;
        } catch (TaskException ex) {
            throw ex;
        } catch (Exception ex) {
            throw new TaskException(
                    String.format("TenantCode: %s doesn't exist", taskExecutionContext.getTenantCode()));
        }
    }

3、TaskChannel
TaskPluginManager Master启动的时候通 google的 @AutoService来完成SPI注册，参考 : https://segmentfault.com/a/1190000044973137

Master启动时候TaskPluginManager初始化
org.apache.dolphinscheduler.server.master.MasterServer#run

@PostConstruct
    public void run() throws SchedulerException {
        ......

        // install task plugin
        // TODO 是通过 google的 @AutoService来进行SPI注册的
        this.taskPluginManager.loadPlugin();

       ......
    }

org.apache.dolphinscheduler.plugin.task.api.TaskPluginManager#loadPlugin

public void loadPlugin() {
        if (!loadedFlag.compareAndSet(false, true)) {
            log.warn("The task plugin has already been loaded");
            return;
        }

        // TODO 实例化的时候是通过SPI进行加载的
        PrioritySPIFactory<TaskChannelFactory> prioritySPIFactory = new PrioritySPIFactory<>(TaskChannelFactory.class);
        for (Map.Entry<String, TaskChannelFactory> entry : prioritySPIFactory.getSPIMap().entrySet()) {
            String factoryName = entry.getKey();
            TaskChannelFactory factory = entry.getValue();

            log.info("Registering task plugin: {} - {}", factoryName, factory.getClass().getSimpleName());

            taskChannelFactoryMap.put(factoryName, factory);
            taskChannelMap.put(factoryName, factory.create());

            log.info("Registered task plugin: {} - {}", factoryName, factory.getClass().getSimpleName());
        }

    }

核心逻辑其实就是

TaskChannelFactory 接口 :

public interface TaskChannelFactory extends UiChannelFactory, PrioritySPI {

    TaskChannel create();

    default SPIIdentify getIdentify() {
        return SPIIdentify.builder().name(getName()).build();
    }
}

Task插件都实现了TaskChannelFactory接口并使用@AutoService注解 :
以ShellTaskChannelFactory为例 :

@AutoService(TaskChannelFactory.class)
public class ShellTaskChannelFactory implements TaskChannelFactory {

    @Override
    public TaskChannel create() {
        return new ShellTaskChannel();
    }

    @Override
    public String getName() {
        return "SHELL";
    }

    @Override
    public List<PluginParams> getParams() {
        List<PluginParams> paramsList = new ArrayList<>();

        InputParam nodeName = InputParam.newBuilder("name", "$t('Node name')")
                .addValidate(Validate.newBuilder()
                        .setRequired(true)
                        .build())
                .build();

        RadioParam runFlag = RadioParam.newBuilder("runFlag", "RUN_FLAG")
                .addParamsOptions(new ParamsOptions("NORMAL", "NORMAL", false))
                .addParamsOptions(new ParamsOptions("FORBIDDEN", "FORBIDDEN", false))
                .build();

        paramsList.add(nodeName);
        paramsList.add(runFlag);
        return paramsList;
    }
}

在这里创建了 ShellTaskChannel，也就是TaskChannel

4、下载所需资源
org.apache.dolphinscheduler.server.worker.utils.TaskExecutionContextUtils#downloadResourcesIfNeeded

public static ResourceContext downloadResourcesIfNeeded(String tenant,
                                                            TaskChannel taskChannel,
                                                            StorageOperate storageOperate,
                                                            TaskExecutionContext taskExecutionContext) {
        AbstractParameters abstractParameters = taskChannel.parseParameters(
                ParametersNode.builder()
                        .taskType(taskExecutionContext.getTaskType())
                        .taskParams(taskExecutionContext.getTaskParams())
                        .build());

        // TODO 其实这里如果要是Sql，这里直接 ArrayList<>()了，下面就不走了
        List<ResourceInfo> resourceFilesList = abstractParameters.getResourceFilesList();
        if (CollectionUtils.isEmpty(resourceFilesList)) {
            log.debug("There is no resource file need to download");
            return new ResourceContext();
        }

        ResourceContext resourceContext = new ResourceContext();
        String taskWorkingDirectory = taskExecutionContext.getExecutePath();

        for (ResourceInfo resourceInfo : resourceFilesList) {
            // TODO 在存储中的路径，比如说hdfs上的文件路径
            String resourceAbsolutePathInStorage = resourceInfo.getResourceName();
            // TODO 文件名称
            String resourceRelativePath = storageOperate.getResourceFileName(tenant, resourceAbsolutePathInStorage);
            // TODO 本地的绝对路径
            String resourceAbsolutePathInLocal = Paths.get(taskWorkingDirectory, resourceRelativePath).toString();
            File file = new File(resourceAbsolutePathInLocal);
            if (!file.exists()) {
                try {
                    long resourceDownloadStartTime = System.currentTimeMillis();
                    // TODO 资源进行下载
                    storageOperate.download(resourceAbsolutePathInStorage, resourceAbsolutePathInLocal, true);
                    log.debug("Download resource file {} under: {} successfully", resourceAbsolutePathInStorage,
                            resourceAbsolutePathInLocal);
                    FileUtils.setFileTo755(file);
                    WorkerServerMetrics
                            .recordWorkerResourceDownloadTime(System.currentTimeMillis() - resourceDownloadStartTime);
                    WorkerServerMetrics
                            .recordWorkerResourceDownloadSize(Files.size(Paths.get(resourceAbsolutePathInLocal)));
                    WorkerServerMetrics.incWorkerResourceDownloadSuccessCount();
                } catch (Exception ex) {
                    WorkerServerMetrics.incWorkerResourceDownloadFailureCount();
                    throw new TaskException(
                            String.format("Download resource file: %s error", resourceAbsolutePathInStorage), ex);
                }
            }

            // TODO 封装resourceContext
            ResourceContext.ResourceItem resourceItem = ResourceContext.ResourceItem.builder()
                    .resourceAbsolutePathInStorage(resourceAbsolutePathInStorage)
                    .resourceRelativePath(resourceRelativePath)
                    .resourceAbsolutePathInLocal(resourceAbsolutePathInLocal)
                    .build();
            resourceContext.addResourceItem(resourceItem);
        }
        return resourceContext;
    }

5、下载上游文件(上下游文件的传递)
示例如下 :

upTask ：

downTask :

核心逻辑 : 上下游文件传递其实也很简单，就是针对本节点来说就是在本地生成对应的文件，然后上传到比如说HDFS类型的资源中心，然后下游节点会跟进上游taskName.输出变量进行指定资源中心文件的下载

downTask中的downloadUpstreamFiles逻辑 :
org.apache.dolphinscheduler.server.worker.utils.TaskFilesTransferUtils#downloadUpstreamFiles

public static void downloadUpstreamFiles(TaskExecutionContext taskExecutionContext, StorageOperate storageOperate) {
        // TODO 上游传递过来的变量池
        List<Property> varPools = getVarPools(taskExecutionContext);

        // get map of varPools for quick search
        Map<String, Property> varPoolsMap = varPools.stream().collect(Collectors.toMap(Property::getProp, x -> x));

        // get "IN FILE" parameters
        // TODO 其实就是看localParams的参数有没有为IN的FILE的本地参数
        List<Property> localParamsProperty = getFileLocalParams(taskExecutionContext, Direct.IN);

        // TODO 一般情况下，就是这里就结束了
        if (localParamsProperty.isEmpty()) {
            return;
        }

        String executePath = taskExecutionContext.getExecutePath();
        // data path to download packaged data
        // TODO 下载的临时目录
        String downloadTmpPath = String.format("%s/%s", executePath, DOWNLOAD_TMP);

        log.info("Download upstream files...");
        for (Property property : localParamsProperty) {
            // TODO 这里其实就是获取
            /**
             * varPoolsMap 如下 :
             * {"prop":"upTask.file-data","direct":"IN","type":"FILE","value":"DATA_TRANSFER/20240624/13978983404960/2_1893/upTask_1320_text.txt"}
             * {"prop":"upTask.dir-data","direct":"IN","type":"FILE","value":"DATA_TRANSFER/20240624/13978983404960/2_1893/upTask_1320_data_ds_pack.zip"}
             *
             * localParamsProperty 如下 :
             * {"prop":"input_dir","direct":"IN","type":"FILE","value":"upTask.dir-data"}
             */
            // TODO 所以这里是不为null的
            Property inVarPool = varPoolsMap.get(property.getValue());
            if (inVarPool == null) {
                log.error("{} not in  {}", property.getValue(), varPoolsMap.keySet());
                throw new TaskException(String.format("Can not find upstream file using %s, please check the key",
                        property.getValue()));
            }

            String resourcePath = inVarPool.getValue();
            // TODO 其实就是在封装本地的路径
            // TODO 这里注意啊，比如说脚本中 cat input_dir/test1/text.txt，input_dir这个东西是下载路径拼接上的
            String targetPath = String.format("%s/%s", executePath, property.getProp());

            String downloadPath;
            // If the data is packaged, download it to a special directory (DOWNLOAD_TMP) and unpack it to the
            // targetPath
            // TODO 判断是否是zip压缩
            boolean isPack = resourcePath.endsWith(PACK_SUFFIX);
            if (isPack) {
                downloadPath = String.format("%s/%s", downloadTmpPath, new File(resourcePath).getName());
            } else {
                downloadPath = targetPath;
            }

            try {
                // TODO 资源中心路径
                String resourceWholePath =
                        storageOperate.getResourceFullName(taskExecutionContext.getTenantCode(), resourcePath);
                log.info("{} --- Remote:{} to Local:{}", property, resourceWholePath, downloadPath);
                // TODO 系在到本地
                storageOperate.download(resourceWholePath, downloadPath, true);
            } catch (IOException ex) {
                throw new TaskException("Download file from storage error", ex);
            }

            // unpack if the data is packaged
            if (isPack) {
                File downloadFile = new File(downloadPath);
                log.info("Unpack {} to {}", downloadPath, targetPath);
                // TODO 如果是zip就是将本地临时目录下的压缩文件解压到目标路径下
                ZipUtil.unpack(downloadFile, new File(targetPath));
            }
        }

        // delete DownloadTmp Folder if DownloadTmpPath exists
        try {
            // TODO 临时目录下文件删除掉
            org.apache.commons.io.FileUtils.deleteDirectory(new File(downloadTmpPath));
        } catch (IOException e) {
            log.error("Delete DownloadTmpPath {} failed, this will not affect the task status", downloadTmpPath, e);
        }
    }

6、创建任务并初始化
其实就是步骤3中，创建完毕TaskChannel，然后调用createTask，返回AbstractTask，然后调用init方法

......
// TODO 创建任务
task = taskChannel.createTask(taskExecutionContext);
log.info("Task plugin instance: {} create successfully", taskExecutionContext.getTaskType());

// todo: remove the init method, this should initialize in constructor method
// TODO 任务进行初始化
task.init();
log.info("Success initialized task plugin instance successfully");
......

7、给AbstractParameters设置变量池

// TODO 给任务设置变量池
// TODO 一般情况下 taskExecutionContext.getVarPool()这里就为null
task.getParameters().setVarPool(taskExecutionContext.getVarPool());
log.info("Set taskVarPool: {} successfully", taskExecutionContext.getVarPool());

注意 : 默认情况下，这个taskExecutionContext.getVarPool()是空的，除非上游有OUT变量

2.5.3、任务执行

// TODO 回调函数，这个还是很关键的把workerMessageSender、taskExecutionContext以构造函数放到了TaskCallBack中
// TODO 所以taskExecutionContext里面是有之前的内容的
TaskCallBack taskCallBack = TaskCallbackImpl.builder()
        .workerMessageSender(workerMessageSender)
        .taskExecutionContext(taskExecutionContext)
        .build();
.......

// TODO 执行
executeTask(taskCallBack);

executeTask(taskCallBack); 是核心代码，封装了Worker任务的真正的执行逻辑，参数传递的TaskCallBack，用于任务状态的回报(向Master)

下面就来细说executeTask(taskCallBack)的逻辑 :

public void executeTask(TaskCallBack taskCallBack) throws TaskException {
    if (task == null) {
        throw new IllegalArgumentException("The task plugin instance is not initialized");
    }

    // TODO 这里会进行真正的任务处理
    task.handle(taskCallBack);
}

其中的task其实就是AbstractTask，在beforeExecute中 taskChannel.createTask。是Task抽象父类(以ShellTask为例展开说明，其他任务类型类似)

org.apache.dolphinscheduler.plugin.task.shell.ShellTask#handle

public void handle(TaskCallBack taskCallBack) throws TaskException {
    try {

        IShellInterceptorBuilder<?, ?> shellActuatorBuilder = ShellInterceptorBuilderFactory.newBuilder()
                .properties(ParameterUtils.convert(taskExecutionContext.getPrepareParamsMap())) // TODO 这里就是要进行变量的替换
                .appendScript(shellParameters.getRawScript());

        // TODO shell执行
        TaskResponse commandExecuteResult = shellCommandExecutor.run(shellActuatorBuilder, taskCallBack);
        // TODO 执行结果，退出状态码
        setExitStatusCode(commandExecuteResult.getExitStatusCode());
        // TODO 设置进程ID
        setProcessId(commandExecuteResult.getProcessId());
        // TODO shellCommandExecutor.getTaskOutputParams()这返回的是 output -> 123
        shellParameters.dealOutParam(shellCommandExecutor.getTaskOutputParams());
    } catch (InterruptedException e) {
        Thread.currentThread().interrupt();
        log.error("The current Shell task has been interrupted", e);
        setExitStatusCode(EXIT_CODE_FAILURE);
        throw new TaskException("The current Shell task has been interrupted", e);
    } catch (Exception e) {
        log.error("shell task error", e);
        setExitStatusCode(EXIT_CODE_FAILURE);
        throw new TaskException("Execute shell task error", e);
    }
}

---

org.apache.dolphinscheduler.plugin.task.api.shell.ShellInterceptorBuilderFactory
默认走的是 BashShellInterceptorBuilder

public class ShellInterceptorBuilderFactory {
    private final static String INTERCEPTOR_TYPE = PropertyUtils.getString("shell.interceptor.type", "bash");

    @SuppressWarnings("unchecked")
    public static IShellInterceptorBuilder newBuilder() {
        // TODO 默认的走的是这个逻辑
        if (INTERCEPTOR_TYPE.equalsIgnoreCase("bash")) {
            return new BashShellInterceptorBuilder();
        }
        if (INTERCEPTOR_TYPE.equalsIgnoreCase("sh")) {
            return new ShShellInterceptorBuilder();
        }
        if (INTERCEPTOR_TYPE.equalsIgnoreCase("cmd")) {
            return new CmdShellInterceptorBuilder();
        }
        throw new IllegalArgumentException("not support shell type: " + INTERCEPTOR_TYPE);
    }
}

---

.properties(ParameterUtils.convert(taskExecutionContext.getPrepareParamsMap()))  

是向BaseShellInterceptorBuilder的propertyMap中进行taskExecutionContext.getPrepareParamsMap()参数的设置(注意 : taskExecutionContext.getPrepareParamsMap()这玩意是在Master中进行的封装，参考https://segmentfault.com/a/1190000044982236)

---

.appendScript(shellParameters.getRawScript())

是向BaseShellInterceptorBuilder的scripts进行设置值

---

org.apache.dolphinscheduler.plugin.task.api.AbstractCommandExecutor#run

public TaskResponse run(IShellInterceptorBuilder iShellInterceptorBuilder,
                            TaskCallBack taskCallBack) throws Exception {
    TaskResponse result = new TaskResponse();
    // todo: we need to use state like JDK Thread to make sure the killed task should not be executed
    iShellInterceptorBuilder = iShellInterceptorBuilder
            // TODO 设置执行路径
            .shellDirectory(taskRequest.getExecutePath())
            // TODO 这里设置shell 名字
            .shellName(taskRequest.getTaskAppId());

    // Set system env
    // TODO 在这里是设置默认的，比如说可以设置为 /etc/profile
    if (CollectionUtils.isNotEmpty(ShellUtils.ENV_SOURCE_LIST)) {
        // TODO 这里其实就是向 systemEnvs 中加入ENV_SOURCE_LIST中配置的环境文件的列表
        ShellUtils.ENV_SOURCE_LIST.forEach(iShellInterceptorBuilder::appendSystemEnv);
    }

    // Set custom env
    // TODO 设置自定义的env
    if (StringUtils.isNotBlank(taskRequest.getEnvironmentConfig())) {
        // TODO 向 customEnvScripts 中加入
        iShellInterceptorBuilder.appendCustomEnvScript(taskRequest.getEnvironmentConfig());
    }

    // Set k8s config (This is only work in Linux)
    if (taskRequest.getK8sTaskExecutionContext() != null) {
        iShellInterceptorBuilder.k8sConfigYaml(taskRequest.getK8sTaskExecutionContext().getConfigYaml());
    }

    // Set sudo (This is only work in Linux)
    // TODO 设置sudo为true的模式
    iShellInterceptorBuilder.sudoMode(OSUtils.isSudoEnable());

    // Set tenant (This is only work in Linux)
    // TODO 设置租户
    iShellInterceptorBuilder.runUser(taskRequest.getTenantCode());

    // Set CPU Quota (This is only work in Linux)
    if (taskRequest.getCpuQuota() != null) {
        iShellInterceptorBuilder.cpuQuota(taskRequest.getCpuQuota());
    }

    // Set memory Quota (This is only work in Linux)
    if (taskRequest.getMemoryMax() != null) {
        iShellInterceptorBuilder.memoryQuota(taskRequest.getMemoryMax());
    }

    // TODO 这个是重点
    IShellInterceptor iShellInterceptor = iShellInterceptorBuilder.build();
    // TODO 使用ProcessBuilder进行执行，支持sudo模式，和bash模式
    process = iShellInterceptor.execute();

    // parse process output
    // TODO 这里解析到进程的输出
    parseProcessOutput(this.process);

    // collect pod log
    collectPodLogIfNeeded();

    int processId = getProcessId(this.process);

    result.setProcessId(processId);

    // cache processId
    taskRequest.setProcessId(processId);

    // print process id
    log.info("process start, process id is: {}", processId);

    // if timeout occurs, exit directly
    long remainTime = getRemainTime();

    // update pid before waiting for the run to finish
    if (null != taskCallBack) {
        // TODO 更新任务实例信息
        taskCallBack.updateTaskInstanceInfo(processId);
    }

    // waiting for the run to finish
    boolean status = this.process.waitFor(remainTime, TimeUnit.SECONDS);

    TaskExecutionStatus kubernetesStatus =
            ProcessUtils.getApplicationStatus(taskRequest.getK8sTaskExecutionContext(), taskRequest.getTaskAppId());

    if (taskOutputFuture != null) {
        try {
            // Wait the task log process finished.
            taskOutputFuture.get();
        } catch (ExecutionException e) {
            log.error("Handle task log error", e);
        }
    }

    if (podLogOutputFuture != null) {
        try {
            // Wait kubernetes pod log collection finished
            podLogOutputFuture.get();
            // delete pod after successful execution and log collection
            ProcessUtils.cancelApplication(taskRequest);
        } catch (ExecutionException e) {
            log.error("Handle pod log error", e);
        }
    }

    // if SHELL task exit
    if (status && kubernetesStatus.isSuccess()) {

        // SHELL task state
        result.setExitStatusCode(this.process.exitValue());

    } else {
        log.error("process has failure, the task timeout configuration value is:{}, ready to kill ...",
                taskRequest.getTaskTimeout());
        result.setExitStatusCode(EXIT_CODE_FAILURE);
        cancelApplication();
    }
    int exitCode = this.process.exitValue();
    String exitLogMessage = EXIT_CODE_KILL == exitCode ? "process has killed." : "process has exited.";
    log.info("{} execute path:{}, processId:{} ,exitStatusCode:{} ,processWaitForStatus:{} ,processExitValue:{}",
            exitLogMessage, taskRequest.getExecutePath(), processId, result.getExitStatusCode(), status, exitCode);
    return result;
}

---

设置默认的环境变量 :

// Set system env
// TODO 在这里是设置默认的，比如说可以设置为 /etc/profile
if (CollectionUtils.isNotEmpty(ShellUtils.ENV_SOURCE_LIST)) {
    // TODO 这里其实就是向 systemEnvs 中加入ENV_SOURCE_LIST中配置的环境文件的列表 ShellUtils.ENV_SOURCE_LIST.forEach(iShellInterceptorBuilder::appendSystemEnv);
}

org.apache.dolphinscheduler.plugin.task.api.utils.ShellUtils

public List<String> ENV_SOURCE_LIST = Arrays.stream(
            Optional.ofNullable(PropertyUtils.getString("shell.env_source_list")).map(s -> s.split(","))
                    .orElse(new String[0]))
            .map(String::trim)
            .filter(StringUtils::isNotBlank)
            .collect(Collectors.toList());

读取的是 common.properties，这里可以配置默认的环境变量

# The default env list will be load by Shell task, e.g. /etc/profile,~/.bash_profile
# 默认是空，比如说可以是
shell.env_source_list=/etc/profile

---

// TODO 这个是重点
IShellInterceptor iShellInterceptor = iShellInterceptorBuilder.build();

org.apache.dolphinscheduler.plugin.task.api.shell.bash.BashShellInterceptorBuilder#build

public BashShellInterceptor build() throws FileOperateException, IOException {
    // TODO 这里是生成shell脚本的核心点，写到指定目录下
    generateShellScript();
    // TODO 封装命令
    List<String> bootstrapCommand = generateBootstrapCommand();
    // TODO 实例化BashShellInterceptor
    return new BashShellInterceptor(bootstrapCommand, shellDirectory);
}

org.apache.dolphinscheduler.plugin.task.api.shell.BaseLinuxShellInterceptorBuilder#bootstrapCommandInSudoMode
注意 : 这个方法里面有两层含义，如果是资源限制走的是bootstrapCommandInResourceLimitMode(参考https://segmentfault.com/a/1190000044974900，其实这里还蕴藏着一个大大的BUG(我只修改了ShellTask)，针对其他类型的Shell封装的任务，比如说MR、Spark、Flink等等，如果走资源限制，这里就有问题，因为这些任务在页面上不能设置CPU和内存的Quota)，否则走的是sudo -u 租户 -i /opt/xx.sh

private List<String> bootstrapCommandInSudoMode() {
    // TODO 如果task.resource.limit.state为false，这里的逻辑不会走，也不会走CPU和内存的限制
    if (PropertyUtils.getBoolean(AbstractCommandExecutorConstants.TASK_RESOURCE_LIMIT_STATE, false)) {
        return bootstrapCommandInResourceLimitMode();
    }
    List<String> bootstrapCommand = new ArrayList<>();
    bootstrapCommand.add("sudo");
    if (StringUtils.isNotBlank(runUser)) {
        bootstrapCommand.add("-u");
        bootstrapCommand.add(runUser);
    }
    bootstrapCommand.add("-i");
    bootstrapCommand.add(shellAbsolutePath().toString());
    return bootstrapCommand;
}

---

// TODO 使用ProcessBuilder进行执行，支持sudo模式，和bash模式
process = iShellInterceptor.execute();

org.apache.dolphinscheduler.plugin.task.api.shell.BaseShellInterceptor#execute

public Process execute() throws IOException {
    // init process builder
    ProcessBuilder processBuilder = new ProcessBuilder();
    // setting up a working directory
    // TODO 设置工作路径，目的其实就是在执行脚本的时候，可以在该目录的位置来加载比如说jar包什么的
    processBuilder.directory(new File(workingDirectory));
    // merge error information to standard output stream
    processBuilder.redirectErrorStream(true);
    processBuilder.command(executeCommands);
    log.info("Executing shell command : {}", String.join(" ", executeCommands));
    return processBuilder.start();
}

其实就是使用 ProcessBuilder 进行任务的提交

---

org.apache.dolphinscheduler.plugin.task.api.AbstractCommandExecutor#parseProcessOutput

// TODO 解析输出
private void parseProcessOutput(Process process) {
    // todo: remove this this thread pool.
    ExecutorService getOutputLogService = ThreadUtils
            .newSingleDaemonScheduledExecutorService("ResolveOutputLog-thread-" + taskRequest.getTaskName());
    getOutputLogService.execute(() -> {
        TaskOutputParameterParser taskOutputParameterParser = new TaskOutputParameterParser();
        // TODO 这里正好的读取process.getInputStream()的输入
        try (BufferedReader inReader = new BufferedReader(new InputStreamReader(process.getInputStream()))) {
            // TODO 这里设置了任务的日志路径
            LogUtils.setTaskInstanceLogFullPathMDC(taskRequest.getLogPath());
            String line;
            while ((line = inReader.readLine()) != null) {
                // TODO 日志缓冲区
                logBuffer.add(line);
                // TODO 这里解析taskOutputParams，解析比如说 echo '${setValue(output=1)}'。其实就是字符串 ${setValue(output=1)}
                taskOutputParameterParser.appendParseLog(line);
            }
            processLogOutputIsSuccess = true;
        } catch (Exception e) {
            log.error("Parse var pool error", e);
            processLogOutputIsSuccess = true;
        } finally {
            // TODO 在这里的时候就将 taskInstanceLogFullPath 删除了
            LogUtils.removeTaskInstanceLogFullPathMDC();
        }
        taskOutputParams = taskOutputParameterParser.getTaskOutputParams();
    });

    getOutputLogService.shutdown();

    ExecutorService parseProcessOutputExecutorService = ThreadUtils
            .newSingleDaemonScheduledExecutorService("TaskInstanceLogOutput-thread-" + taskRequest.getTaskName());
    taskOutputFuture = parseProcessOutputExecutorService.submit(() -> {
        try {
            LogUtils.setTaskInstanceLogFullPathMDC(taskRequest.getLogPath());
            // TODO 对于非pod(k8s)的任务，其实就是processLogOutputIsSuccess这个标识，这个标识是在上面，就是任务运行完毕了
            while (logBuffer.size() > 1 || !processLogOutputIsSuccess || !podLogOutputIsFinished) {
                if (logBuffer.size() > 1) {
                    logHandler.accept(logBuffer);
                    logBuffer.clear();
                    logBuffer.add(EMPTY_STRING);
                } else {
                    // TODO 如果没有日志输出，默认等待1s
                    Thread.sleep(TaskConstants.DEFAULT_LOG_FLUSH_INTERVAL);
                }
            }
        } catch (Exception e) {
            log.error("Output task log error", e);
        } finally {
            LogUtils.removeTaskInstanceLogFullPathMDC();
        }
    });
    parseProcessOutputExecutorService.shutdown();
}

解说里面核心的两个逻辑
1、结果日志打印

protected LinkedBlockingQueue<String> logBuffer;

public AbstractCommandExecutor(Consumer<LinkedBlockingQueue<String>> logHandler,
                                   TaskExecutionContext taskRequest) {
        this.logHandler = logHandler;
        this.taskRequest = taskRequest;
        this.logBuffer = new LinkedBlockingQueue<>();
        this.logBuffer.add(EMPTY_STRING);

        if (this.taskRequest != null) {
            // set logBufferEnable=true if the task uses logHandler and logBuffer to buffer log messages
            this.taskRequest.setLogBufferEnable(true);
        }
    }

通过 logBuffer 临时存放日志，供parseProcessOutputExecutorService现成消费

日志的生产端 :

while ((line = inReader.readLine()) != null) {
    // TODO 日志缓冲区
    logBuffer.add(line);
    // TODO 这里解析taskOutputParams，解析比如说 echo '${setValue(output=1)}'。其实就是字符串 ${setValue(output=1)}
    taskOutputParameterParser.appendParseLog(line);
}

日志的消费端 :

this.shellCommandExecutor = new ShellCommandExecutor(this::logHandle, taskExecutionContext);

public void logHandle(LinkedBlockingQueue<String> logs) {

    StringJoiner joiner = new StringJoiner("\n\t");
    while (!logs.isEmpty()) {
        joiner.add(logs.poll());
    }
    log.info(" -> {}", joiner);
}

while (logBuffer.size() > 1 || !processLogOutputIsSuccess || !podLogOutputIsFinished) {
    if (logBuffer.size() > 1) {
        logHandler.accept(logBuffer);
        logBuffer.clear();
        logBuffer.add(EMPTY_STRING);
    } else {
        // TODO 如果没有日志输出，默认等待1s
        Thread.sleep(TaskConstants.DEFAULT_LOG_FLUSH_INTERVAL);
    }
}

所以查看如果是Shell输出日志都是 -> 开头的，比如说

[INFO] 2024-06-24 09:35:44.678 +0800 -  -> 
    .
    ├── 1893_1321.sh
    └── input_dir
        ├── test1
        │   └── text.txt
        └── test2
            └── text.txt
    
    3 directories, 3 files
    test1 message
    test2 message

2、解析变量池

while ((line = inReader.readLine()) != null) {
    // TODO 日志缓冲区
    logBuffer.add(line);
    // TODO 这里解析taskOutputParams，解析比如说 echo '${setValue(output=1)}'。其实就是字符串 ${setValue(output=1)}
    taskOutputParameterParser.appendParseLog(line);
}

org.apache.dolphinscheduler.plugin.task.api.parser.TaskOutputParameterParser#appendParseLog

public void appendParseLog(String logLine) {
    if (logLine == null) {
        return;
    }

    // TODO 刚开始进来，是不会走这里的
    if (currentTaskOutputParam != null) {
        if (currentTaskOutputParam.size() > maxOneParameterRows
                || currentTaskOutputParamLength > maxOneParameterLength) {
            log.warn(
                    "The output param expression '{}' is too long, the max rows is {}, max length is {}, will skip this param",
                    String.join("\n", currentTaskOutputParam), maxOneParameterLength, maxOneParameterRows);
            currentTaskOutputParam = null;
            currentTaskOutputParamLength = 0;
            return;
        }
        // continue to parse the rest of line
        int i = logLine.indexOf(")}");
        if (i == -1) {
            // the end of var pool not found
            currentTaskOutputParam.add(logLine);
            currentTaskOutputParamLength += logLine.length();
        } else {
            // the end of var pool found
            currentTaskOutputParam.add(logLine.substring(0, i + 2));
            Pair<String, String> keyValue = parseOutputParam(String.join("\n", currentTaskOutputParam));
            if (keyValue.getKey() != null && keyValue.getValue() != null) {
                // TODO 解析完毕就放入到taskOutputParams中
                taskOutputParams.put(keyValue.getKey(), keyValue.getValue());
            }
            currentTaskOutputParam = null;
            currentTaskOutputParamLength = 0;
            // continue to parse the rest of line
            if (i + 2 != logLine.length()) {
                appendParseLog(logLine.substring(i + 2));
            }
        }
        return;
    }

    int indexOfVarPoolBegin = logLine.indexOf("${setValue(");
    if (indexOfVarPoolBegin == -1) {
        indexOfVarPoolBegin = logLine.indexOf("#{setValue(");
    }
    if (indexOfVarPoolBegin == -1) {
        return;
    }
    currentTaskOutputParam = new ArrayList<>();
    appendParseLog(logLine.substring(indexOfVarPoolBegin));
}

解析完毕就放入到taskOutputParams中

---

更新Pid(向Master汇报)

// update pid before waiting for the run to finish
if (null != taskCallBack) {
    // TODO 更新任务实例信息
    taskCallBack.updateTaskInstanceInfo(processId);
}

这里的优化参考 : https://segmentfault.com/a/1190000044988696

---

超时判断

long remainTime = getRemainTime();

private long getRemainTime() {
    long usedTime = (System.currentTimeMillis() - taskRequest.getStartTime()) / 1000;
    long remainTime = taskRequest.getTaskTimeout() - usedTime;

    if (remainTime < 0) {
        throw new RuntimeException("task execution time out");
    }

    return remainTime;
}

......
// waiting for the run to finish
// TODO 这里其实就是一个超时等待，其实就是说如果不设置超时等待时间，无限等待
boolean status = this.process.waitFor(remainTime, TimeUnit.SECONDS);

---

// TODO 设置退出码
// if SHELL task exit
if (status && kubernetesStatus.isSuccess()) {

    // SHELL task state
    result.setExitStatusCode(this.process.exitValue());

} else {
    log.error("process has failure, the task timeout configuration value is:{}, ready to kill ...",
            taskRequest.getTaskTimeout());
    result.setExitStatusCode(EXIT_CODE_FAILURE);
    cancelApplication();
}
int exitCode = this.process.exitValue();
String exitLogMessage = EXIT_CODE_KILL == exitCode ? "process has killed." : "process has exited.";
log.info("{} execute path:{}, processId:{} ,exitStatusCode:{} ,processWaitForStatus:{} ,processExitValue:{}",
        exitLogMessage, taskRequest.getExecutePath(), processId, result.getExitStatusCode(), status, exitCode);

---

// TODO 执行结果，退出状态码
setExitStatusCode(commandExecuteResult.getExitStatusCode());
// TODO 设置进程ID
setProcessId(commandExecuteResult.getProcessId());
// TODO shellCommandExecutor.getTaskOutputParams()这返回的是比如说 output -> 123
shellParameters.dealOutParam(shellCommandExecutor.getTaskOutputParams());

org.apache.dolphinscheduler.plugin.task.api.parameters.AbstractParameters#dealOutParam

public void dealOutParam(Map<String, String> taskOutputParams) {
    // TODO 其实就是说如果localParams不存在，就算设置了输出也不管用
    if (CollectionUtils.isEmpty(localParams)) {
        return;
    }

    // TODO 这里其实就是过滤出来localParams为OUT的参数
    List<Property> outProperty = getOutProperty(localParams);
    if (CollectionUtils.isEmpty(outProperty)) {
        return;
    }


    // TODO 如果taskOutputParams为空，输出参数会放入到varPool中
    if (MapUtils.isEmpty(taskOutputParams)) {
        outProperty.forEach(this::addPropertyToValPool);
        return;
    }

    // TODO 这里其实就是想说，找到outProperty和taskOutputParams相同的key，然后把对应的value换成taskOutputParams中的value
    // TODO 最终放到变量池中
    for (Property info : outProperty) {
        String propValue = taskOutputParams.get(info.getProp());
        if (StringUtils.isNotEmpty(propValue)) {
            info.setValue(propValue);
            addPropertyToValPool(info);
        } else {
            log.warn("Cannot find the output parameter {} in the task output parameters", info.getProp());
        }
    }
}

这里其实就是想说，找到outProperty和taskOutputParams相同的key，然后把对应的value换成taskOutputParams中的value，等待向Master汇报存在TaskInstance的变量池中

2.5.4、任务执行之后(收尾工作)

protected void afterExecute() throws TaskException {
    if (task == null) {
        throw new TaskException("The current task instance is null");
    }
    // TODO 是否要发送告警，使用JDK动态代理 RPC通信调用alert模块AlertBootstrapService
    sendAlertIfNeeded();

    // TODO 发送结果
    sendTaskResult();

    WorkerTaskExecutorHolder.remove(taskExecutionContext.getTaskInstanceId());

    // TODO common.properties development.state=false，默认是false。如果设置true
    // TODO 就会开发模式，意味着Dolpinscheduler封装的脚本、jar包不清理
    log.info("Remove the current task execute context from worker cache");
    clearTaskExecPathIfNeeded();
}

发送结果

protected void sendTaskResult() {
    taskExecutionContext.setCurrentExecutionStatus(task.getExitStatus());
    taskExecutionContext.setProcessId(task.getProcessId());
    taskExecutionContext.setAppIds(task.getAppIds());

    // TODO 其实就是发送变量池，这里是变量池
    taskExecutionContext.setVarPool(JSONUtils.toJsonString(task.getParameters().getVarPool()));
    taskExecutionContext.setEndTime(System.currentTimeMillis());

    // upload out files and modify the "OUT FILE" property in VarPool
    // TODO 上传输出文件并修改输出文件到变量池中
    TaskFilesTransferUtils.uploadOutputFiles(taskExecutionContext, storageOperate);
    log.info("Upload output files: {} successfully",
            TaskFilesTransferUtils.getFileLocalParams(taskExecutionContext, Direct.OUT));

    // TODO 发送任务的结果
    workerMessageSender.sendMessageWithRetry(taskExecutionContext,
            ITaskInstanceExecutionEvent.TaskInstanceExecutionEventType.FINISH);
    log.info("Send task execute status: {} to master : {}", taskExecutionContext.getCurrentExecutionStatus().name(),
            taskExecutionContext.getWorkflowInstanceHost());
}

Shell状态码小插曲

[root@node opt]# vim test.sh 
[root@node opt]# sh test.sh 
me is journey
[root@node opt]# echo $?
0
[root@node opt]# vim test.sh 
[root@node opt]# sh test.sh 
test.sh: line 2: echo1: command not found
[root@node opt]# echo $?
127
[root@node opt]# vim test.sh 
[root@node opt]# sh test.sh 
me is 10.253.26.85
Killed
[root@node opt]# echo $?
137

总结 : 其实就是想说SHELL任务正常的退出码为0，被kill掉的状态码为137。其他为异常

---

任务状态码判断逻辑 :

taskExecutionContext.setCurrentExecutionStatus(task.getExitStatus());

org.apache.dolphinscheduler.plugin.task.api.AbstractTask#getExitStatus
// 其实就是说如果状态码返回为0，任务为成功；状态码为137为KILL。其他状态为失败。而task.getExitStatus()状态是由executeTask中设置完成的
public TaskExecutionStatus getExitStatus() {
    switch (getExitStatusCode()) {
        case TaskConstants.EXIT_CODE_SUCCESS:
            return TaskExecutionStatus.SUCCESS;
        case TaskConstants.EXIT_CODE_KILL:
            return TaskExecutionStatus.KILL;
        default:
            return TaskExecutionStatus.FAILURE;
    }
}

---

上传输出文件到资源中心 :
org.apache.dolphinscheduler.server.worker.utils.TaskFilesTransferUtils#uploadOutputFiles

public static void uploadOutputFiles(TaskExecutionContext taskExecutionContext,
                                         StorageOperate storageOperate) throws TaskException {
    List<Property> varPools = getVarPools(taskExecutionContext);
    // get map of varPools for quick search
    Map<String, Property> varPoolsMap = varPools.stream().collect(Collectors.toMap(Property::getProp, x -> x));

    // get OUTPUT FILE parameters
    List<Property> localParamsProperty = getFileLocalParams(taskExecutionContext, Direct.OUT);

    if (localParamsProperty.isEmpty()) {
        return;
    }

    log.info("Upload output files ...");
    for (Property property : localParamsProperty) {
        // get local file path
        String path = String.format("%s/%s", taskExecutionContext.getExecutePath(), property.getValue());

        // TODO packIfDir 和 crc其实就是想说，如果是目录，就对目录进行打zip包，然后生成crc。如果是文件就对文件生成crc
        String srcPath = packIfDir(path);

        // get crc file path
        String srcCRCPath = srcPath + CRC_SUFFIX;
        try {
            FileUtils.writeContent2File(FileUtils.getFileChecksum(path), srcCRCPath);
        } catch (IOException ex) {
            throw new TaskException(ex.getMessage(), ex);
        }

        // get remote file path
        // TODO DATA_TRANSFER/DATE/ProcessDefineCode/ProcessDefineVersion_ProcessInstanceID/TaskName_TaskInstanceID_FileName
        String resourcePath = getResourcePath(taskExecutionContext, new File(srcPath).getName());
        String resourceCRCPath = resourcePath + CRC_SUFFIX;
        try {
            // upload file to storage
            // TODO 以hdfs来说
            // TODO hdfs跟路径/tenantCode/resources/DATA_TRANSFER/DATE/ProcessDefineCode/ProcessDefineVersion_ProcessInstanceID/TaskName_TaskInstanceID_FileName
            String resourceWholePath =
                    storageOperate.getResourceFullName(taskExecutionContext.getTenantCode(), resourcePath);
            String resourceCRCWholePath =
                    storageOperate.getResourceFullName(taskExecutionContext.getTenantCode(), resourceCRCPath);
            log.info("{} --- Local:{} to Remote:{}", property, srcPath, resourceWholePath);
            storageOperate.upload(taskExecutionContext.getTenantCode(), srcPath, resourceWholePath, false, true);
            log.info("{} --- Local:{} to Remote:{}", "CRC file", srcCRCPath, resourceCRCWholePath);
            storageOperate.upload(taskExecutionContext.getTenantCode(), srcCRCPath, resourceCRCWholePath, false,
                    true);
        } catch (IOException ex) {
            throw new TaskException("Upload file to storage error", ex);
        }

        // update varPool
        Property oriProperty;
        // if the property is not in varPool, add it
        if (varPoolsMap.containsKey(property.getProp())) { // 理论上不会走到这个分支
            oriProperty = varPoolsMap.get(property.getProp());
        } else {
            oriProperty = new Property(property.getProp(), Direct.OUT, DataType.FILE, property.getValue());
            // TODO 添加到变量池中
            varPools.add(oriProperty);
        }

        // TODO 这里就设置了任务名称.property name
        oriProperty.setProp(String.format("%s.%s", taskExecutionContext.getTaskName(), oriProperty.getProp()));
        // TODO 这里很关键，其实就是把资源的相对路径放入到了变量池对应的value中
        oriProperty.setValue(resourcePath);
    }

    // TODO 这里是设置FILE的变量池
    taskExecutionContext.setVarPool(JSONUtils.toJsonString(varPools));
}

发送任务的结果 :

workerMessageSender.sendMessageWithRetry(taskExecutionContext,
                ITaskInstanceExecutionEvent.TaskInstanceExecutionEventType.FINISH);

3、诉说WorkerMessageSender组件作用

4、Kill任务逻辑

org.apache.dolphinscheduler.server.worker.runner.operator.TaskInstanceKillOperationFunction#operate

public TaskInstanceKillResponse operate(TaskInstanceKillRequest taskInstanceKillRequest) {
    log.info("Receive TaskInstanceKillRequest: {}", taskInstanceKillRequest);

    // TODO 任务实例
    int taskInstanceId = taskInstanceKillRequest.getTaskInstanceId();
    try {
        LogUtils.setTaskInstanceIdMDC(taskInstanceId);
        // TODO Worker任务执行器
        WorkerTaskExecutor workerTaskExecutor = WorkerTaskExecutorHolder.get(taskInstanceId);
        if (workerTaskExecutor == null) {
            log.error("Cannot find WorkerTaskExecutor for taskInstance: {}", taskInstanceId);
            return TaskInstanceKillResponse.fail("Cannot find WorkerTaskExecutor");
        }

        // TODO 任务执行上下文
        TaskExecutionContext taskExecutionContext = workerTaskExecutor.getTaskExecutionContext();

        LogUtils.setTaskInstanceLogFullPathMDC(taskExecutionContext.getLogPath());

        // TODO 这里会进行kill
        boolean result = doKill(taskExecutionContext);

        // TODO 使用 Process.destroy() 是 Java 中 Process 类的一个方法，用于销毁与该 Process 对象关联的子进程
        this.cancelApplication(workerTaskExecutor);

        int processId = taskExecutionContext.getProcessId();
        // TODO 这里其实想说的是，如果processId为0，直接把该任务的状态设置为KILL，然后在Worker上报信息的时候就会把KILL状态上报上去
        // TODO 一定要注意，当前情况不一定是真正的kill掉，只是让DS里面的状态是对的
        if (processId == 0) {
            workerManager.killTaskBeforeExecuteByInstanceId(taskInstanceId);
            taskExecutionContext.setCurrentExecutionStatus(TaskExecutionStatus.KILL);
            // todo: the task might be executed, but the processId is 0
            WorkerTaskExecutorHolder.remove(taskInstanceId);
            log.info("The task has not been executed and has been cancelled, task id:{}", taskInstanceId);
            return TaskInstanceKillResponse.success(taskExecutionContext);
        }

        // TODO 这个其实就是说明，我kill掉了。成功了。然后这个时候Worker其实会感知到任务被kill掉，在他的sendResult FINISH的时候上报
        // TODO 上去就可以了
        taskExecutionContext
                .setCurrentExecutionStatus(result ? TaskExecutionStatus.SUCCESS : TaskExecutionStatus.FAILURE);

        WorkerTaskExecutorHolder.remove(taskExecutionContext.getTaskInstanceId());
        // TODO 删除重试消息
        messageRetryRunner.removeRetryMessages(taskExecutionContext.getTaskInstanceId());
        return TaskInstanceKillResponse.success(taskExecutionContext);
    } finally {
        LogUtils.removeTaskInstanceIdMDC();
        LogUtils.removeTaskInstanceLogFullPathMDC();
    }
}

---

杀进程和yarn上的任务 :

// TODO 这里会进行kill
boolean result = doKill(taskExecutionContext);

org.apache.dolphinscheduler.server.worker.runner.operator.TaskInstanceKillOperationFunction#doKill

private boolean doKill(TaskExecutionContext taskExecutionContext) {
    // kill system process
    // TODO 杀死Shell关联的进程
    boolean processFlag = killProcess(taskExecutionContext.getTenantCode(), taskExecutionContext.getProcessId());

    // TODO kill yarn or k8s application
    try {
        ProcessUtils.cancelApplication(taskExecutionContext);
    } catch (TaskException e) {
        return false;
    }
    return processFlag;
}

org.apache.dolphinscheduler.server.worker.runner.operator.TaskInstanceKillOperationFunction#killProcess

杀进程和子进程 : 注意，这里和官网有修改，如果有异常打印warn就好，因为有时候不能有权限杀死所有进程

protected boolean killProcess(String tenantCode, Integer processId) {
    // todo: directly interrupt the process
    if (processId == null || processId.equals(0)) {
        return true;
    }

    try {
        String pidsStr = ProcessUtils.getPidsStr(processId);
        if (!Strings.isNullOrEmpty(pidsStr)) {
            String cmd = String.format("kill -9 %s", pidsStr);
            cmd = OSUtils.getSudoCmd(tenantCode, cmd);
            log.info("process id:{}, cmd:{}", processId, cmd);
            OSUtils.exeCmd(cmd);
        }
    } catch (Exception e) {
        log.warn("kill task error", e);
    }
    return true;
}

杀死yarn上的任务
org.apache.dolphinscheduler.plugin.task.api.utils.ProcessUtils#cancelApplication

public static void cancelApplication(TaskExecutionContext taskExecutionContext) {
    try {
        // TODO k8s
        if (Objects.nonNull(taskExecutionContext.getK8sTaskExecutionContext())) {
            if (!TASK_TYPE_SET_K8S.contains(taskExecutionContext.getTaskType())) {
                // Set empty container name for Spark on K8S task
                applicationManagerMap.get(ResourceManagerType.KUBERNETES)
                        .killApplication(new KubernetesApplicationManagerContext(
                                taskExecutionContext.getK8sTaskExecutionContext(),
                                taskExecutionContext.getTaskAppId(), ""));
            }
        } else {
            // TODO YARN
            String host = taskExecutionContext.getHost();
            String executePath = taskExecutionContext.getExecutePath();
            String tenantCode = taskExecutionContext.getTenantCode();
            List<String> appIds;
            // TODO 容错的走这个逻辑
            if (StringUtils.isNotEmpty(taskExecutionContext.getAppIds())) {
                // is failover
                appIds = Arrays.asList(taskExecutionContext.getAppIds().split(COMMA));
            } else {
                String logPath = taskExecutionContext.getLogPath();
                String appInfoPath = taskExecutionContext.getAppInfoPath();
                if (logPath == null || appInfoPath == null || executePath == null || tenantCode == null) {
                    log.error(
                            "Kill yarn job error, the input params is illegal, host: {}, logPath: {}, appInfoPath: {}, executePath: {}, tenantCode: {}",
                            host, logPath, appInfoPath, executePath, tenantCode);
                    throw new TaskException("Cancel application failed!");
                }

                log.info("Get appIds from worker {}, taskLogPath: {}", host, logPath);
                // TODO 这里就是正则解析log获取appIds
                appIds = LogUtils.getAppIds(logPath, appInfoPath,
                        PropertyUtils.getString(APPID_COLLECT, DEFAULT_COLLECT_WAY));
                taskExecutionContext.setAppIds(String.join(TaskConstants.COMMA, appIds));
            }

            // TODO 如果这里说明appIds是不存在的
            if (CollectionUtils.isEmpty(appIds)) {
                log.info("The appId is empty");
                return;
            }

            ApplicationManager applicationManager = applicationManagerMap.get(ResourceManagerType.YARN);
            applicationManager.killApplication(new YarnApplicationManagerContext(executePath, tenantCode, appIds));
        }
    } catch (Exception e) {
        log.error("Cancel application failed.", e);
    }
}

task日志中使用正则表达式来解析appIds，这里默认走log，不走aop，参考 : https://segmentfault.com/a/1190000044965606

appIds = LogUtils.getAppIds(logPath, appInfoPath,
                            PropertyUtils.getString(APPID_COLLECT, DEFAULT_COLLECT_WAY));

public List<String> getAppIds(String logPath, String appInfoPath, String fetchWay) {
    if (!StringUtils.isEmpty(fetchWay) && fetchWay.equals("aop")) {
        log.info("Start finding appId in {}, fetch way: {} ", appInfoPath, fetchWay);
        // TODO 如果走aop拦截的写的日志文件中读取
        return getAppIdsFromAppInfoFile(appInfoPath);
    } else {
        log.info("Start finding appId in {}, fetch way: {} ", logPath, fetchWay);
        // TODO 从日志中进行正则匹配
        return getAppIdsFromLogFile(logPath);
    }
}

真正的来杀yarn上的任务

applicationManager.killApplication(new YarnApplicationManagerContext(executePath, tenantCode, appIds));

org.apache.dolphinscheduler.plugin.task.api.am.YarnApplicationManager#killApplication

public boolean killApplication(ApplicationManagerContext applicationManagerContext) throws TaskException {
    YarnApplicationManagerContext yarnApplicationManagerContext =
            (YarnApplicationManagerContext) applicationManagerContext;
    String executePath = yarnApplicationManagerContext.getExecutePath();
    String tenantCode = yarnApplicationManagerContext.getTenantCode();
    List<String> appIds = yarnApplicationManagerContext.getAppIds();

    try {
        String commandFile = String.format("%s/%s.kill", executePath, String.join(Constants.UNDERLINE, appIds));
        String cmd = getKerberosInitCommand() + "yarn application -kill " + String.join(Constants.SPACE, appIds);
        execYarnKillCommand(tenantCode, commandFile, cmd);
    } catch (Exception e) {
         log.warn("Kill yarn application {} failed", appIds, e);
    }
    return true;
}

execYarnKillCommand需要注意，因为使用 yarn application -kill。yarn命令可能没有。增加ENV_SOURCE_LIST

private void execYarnKillCommand(String tenantCode, String commandFile,
                                     String cmd) throws Exception {
    StringBuilder sb = new StringBuilder();
    sb.append("#!/bin/sh\n");
    sb.append("BASEDIR=$(cd `dirname $0`; pwd)\n");
    sb.append("cd $BASEDIR\n");

    // TODO 在这里是设置默认的，比如说可以设置为 /etc/profile
    if (CollectionUtils.isNotEmpty(ShellUtils.ENV_SOURCE_LIST)) {
        // TODO 这里其实就是向 systemEnvs 中加入ENV_SOURCE_LIST中配置的环境文件的列表
        ShellUtils.ENV_SOURCE_LIST.forEach(env -> sb.append("source " + env + "\n"));
    }

    sb.append("\n\n");
    sb.append(cmd);

    File f = new File(commandFile);

    if (!f.exists()) {
        org.apache.commons.io.FileUtils.writeStringToFile(new File(commandFile), sb.toString(),
                StandardCharsets.UTF_8);
    }

    String runCmd = String.format("%s %s", Constants.SH, commandFile);
    runCmd = org.apache.dolphinscheduler.common.utils.OSUtils.getSudoCmd(tenantCode, runCmd);
    log.info("kill cmd:{}", runCmd);
    org.apache.dolphinscheduler.common.utils.OSUtils.exeCmd(runCmd);
}

总结 : 如果成功把任务kill掉了，WorkerTaskExecutor会感知到的，进而进行KILL状态的FINISH汇报。如果任务已经完成，如果PID=0，将任务上下文状态设置为KILL，线程池中移除该WorkerTaskExecutor线程，WorkerTaskExecutorHolder移除该缓存

5、暂停

public class TaskInstancePauseOperationFunction
        implements
            ITaskInstanceOperationFunction<TaskInstancePauseRequest, TaskInstancePauseResponse> {

    @Override
    public TaskInstancePauseResponse operate(TaskInstancePauseRequest taskInstancePauseRequest) {
        try {
            LogUtils.setTaskInstanceIdMDC(taskInstancePauseRequest.getTaskInstanceId());
            log.info("Receive TaskInstancePauseRequest: {}", taskInstancePauseRequest);
            log.warn("TaskInstancePauseOperationFunction is not support for worker task yet!");
            return TaskInstancePauseResponse.success();
        } finally {
            LogUtils.removeTaskInstanceIdMDC();
        }
    }
}

画重点 :
其实暂停来说对于Worker来说，什么也不做。也做不了，你想想真的都能让任务暂停么？除非是引擎程序中有所控制，你像MR、SPARK、FLINK这种是不能暂停，暂停的核心逻辑是给流程实例发送一个通知，告诉流程实例我要进行流程的暂停，让正在运行任务的下一个任务进行暂停，当然比如说只有一个任务，任务暂停不了，最后只能成功。还有一种情况就是比如说是最后一个任务，也暂停不了。还有就是执行的很快，你暂停的时候，正好程序要往下执行，而下游已没有任务的情况。这种都是暂停不了的

6、更新流程实例host

这个属于容错，容错章节再详细说

如感兴趣，点赞加关注，谢谢!!!