记一次重装nginx时遇到的问题

头像
Lsnsh
    阅读 9 分钟
    16

    起因

    之前在网上看文章提到说，通过apt-get的方式安装nginx，可能安装不是最新版本的情况，考虑到在Ubuntu下第一次安装nginx，以后肯定会有卸载重新安装新版本的需求，刚好刚开始学习nginx，索性练习下卸载重装的过程。

    安装

    使用Ubuntu下的包管理工具apt来安装nginx

    $ sudo apt-get install nginx

    卸载

    同样使用apt来卸载nginx

    $ sudo apt-get remove nginx

    sudo apt-get autoremove命令帮我们卸载不再需要的依赖包
    在这里我们卸载nginx相关的依赖包

    $ sudo apt-get autoremove

    删除nginx配置文件夹

    $ sudo rm -rf /etc/nginx

    重新安装nginx

    # 更新源
$ sudo apt update
$ sudo apt-get install nginx

    然而控制台报错：

    Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details.
invoke-rc.d: initscript nginx, action "start" failed.
dpkg: error processing package nginx-core (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of nginx:
 nginx depends on nginx-core (>= 1.10.3-0ubuntu0.16.04.2) | nginx-full (>= 1.10.3-0ubuntu0.16.04.2) | nginx-light (>= 1.10.3-0ubuntu0.16.04.2) | nginx-extras (>= 1.10.3-0ubuntu0.16.04.2); however:
  Package nginx-core is not configured yet.
  Package nginx-full is not installed.
  Package nginx-light is not installed.
  Package nginx-extras is not installed.
 nginx depends on nginx-core (<< 1.10.3-0ubuntu0.16.04.2.1~) | nginx-full (<< 1.10.3-0ubuntu0.16.04.2.1~) | nginx-light (<< 1.10.3-0ubuntu0.16.04.2.1~) | nginx-extras (<< 1.10.3-0ubuntu0.16.04.2.1~); however:
  Package nginx-core is not configured yet.
 No apport report written because the error message indicates its a followup error from a previous failure.
 Package nginx-full is not installed.
  Package nginx-light is not installed.
  Package nginx-extras is not installed.

dpkg: error processing package nginx (--configure):
 dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.23-0ubuntu9) ...
Errors were encountered while processing:
 nginx-core
 nginx
E: Sub-process /usr/bin/dpkg returned an error code (1)

    查看nginx.service状态

    $ systemctl status nginx.service
    ● nginx.service - A high performance web server and a reverse proxy server
   Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sat 2018-03-17 23:16:40 CST; 1min 18s ago
  Process: 26795 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=1/FAILURE)
 Main PID: 18259 (code=exited, status=0/SUCCESS)

Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: Starting A high performance web server and a reverse proxy server...
Mar 17 23:16:40 VM-0-5-ubuntu nginx[26795]: nginx: [emerg] open() "/etc/nginx/nginx.conf" failed (2: No such file or direMar 17 23:16:40 VM-0-5-ubuntu nginx[26795]: nginx: configuration file /etc/nginx/nginx.conf test failed
Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: nginx.service: Control process exited, code=exited status=1
Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: Failed to start A high performance web server and a reverse proxy server.
Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: nginx.service: Unit entered failed state.
Mar 17 23:16:40 VM-0-5-ubuntu systemd[1]: nginx.service: Failed with result 'exit-code'.

    仔细看报错信息，获取到两个信息点：

    1. Package nginx-core is not configured yet.
    2. Package nginx-full/nginx-light/nginx-extras is not installed.

    于是上网搜，网上找说可能是apache占用了80端口导致报错

    查看端口占用情况

    $ sudo netstat -nlp
    Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      1287/sshd
udp        0      0 0.0.0.0:68              0.0.0.0:*                           891/dhclient
udp        0      0 172.21.0.5:123          0.0.0.0:*                           1231/ntpd
udp        0      0 127.0.0.1:123           0.0.0.0:*                           1231/ntpd
udp        0      0 0.0.0.0:123             0.0.0.0:*                           1231/ntpd
udp6       0      0 :::123                  :::*                                1231/ntpd

    发现80端口没被占用，而且systemctl status nginx.service的提示信息也没提及80端口被占用，如果提示信息中说80端口被占用，可以执行以下两步试试：

    终止apache运行

    $ sudo service apache2 stop

    重新安装nginx

    $ sudo apt-get install nginx
    了解详细信息请看askubuntu上的提问

    上述情况与我的并不相符，于是换个思路，报错信息中提及nginx的配置文件不存在，思考为什么卸载重装nginx，却没有生成配置文件？
    和第一次安装的时候不一样，然后百度上搜nginx卸载重装后配置文件没有重新生成，找到了类似的问题，给出了如下的操纵步骤：

    卸载nginx不保留配置文件

    $ sudo apt-get --purge remove nginx

Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
  fontconfig-config fonts-dejavu-core libfontconfig1 libgd3 libjbig0 libjpeg-turbo8 libjpeg8 libtiff5 libvpx3 libxpm4
  libxslt1.1 nginx-common nginx-core
Use 'sudo apt autoremove' to remove them.
The following packages will be REMOVED:
  nginx*
0 upgraded, 0 newly installed, 1 to remove and 205 not upgraded.
2 not fully installed or removed.
After this operation, 37.9 kB disk space will be freed.
Do you want to continue? [Y/n] y
(Reading database ... 66386 files and directories currently installed.)
Removing nginx (1.10.3-0ubuntu0.16.04.2) ...
Setting up nginx-core (1.10.3-0ubuntu0.16.04.2) ...
Job for nginx.service failed because the control process exited with error code. See "systemctl status nginx.service" and "journalctl -xe" for details.
invoke-rc.d: initscript nginx, action "start" failed.
dpkg: error processing package nginx-core (--configure):
 subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
 nginx-core
E: Sub-process /usr/bin/dpkg returned an error code (1)

    卸载自动安装且不再需要的依赖包

    $ sudo apt-get autoremove

Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
  fontconfig-config fonts-dejavu-core libfontconfig1 libgd3 libjbig0 libjpeg-turbo8 libjpeg8 libtiff5 libvpx3 libxpm4
  libxslt1.1 nginx-common nginx-core
0 upgraded, 0 newly installed, 13 to remove and 205 not upgraded.
1 not fully installed or removed.
After this operation, 9,745 kB disk space will be freed.
Do you want to continue? [Y/n] y
(Reading database ... 66383 files and directories currently installed.)
Removing nginx-core (1.10.3-0ubuntu0.16.04.2) ...
Removing libgd3:amd64 (2.1.1-4ubuntu0.16.04.8) ...
Removing libfontconfig1:amd64 (2.11.94-0ubuntu1.1) ...
Removing fontconfig-config (2.11.94-0ubuntu1.1) ...
Removing fonts-dejavu-core (2.35-1) ...
Removing libtiff5:amd64 (4.0.6-1ubuntu0.2) ...
Removing libjbig0:amd64 (2.1-3.1) ...
Removing libjpeg8:amd64 (8c-2ubuntu8) ...
Removing libjpeg-turbo8:amd64 (1.4.2-0ubuntu3) ...
Removing libvpx3:amd64 (1.5.0-2ubuntu1) ...
Removing libxpm4:amd64 (1:3.5.11-1ubuntu0.16.04.1) ...
Removing libxslt1.1:amd64 (1.1.28-2.1ubuntu0.1) ...
Removing nginx-common (1.10.3-0ubuntu0.16.04.2) ...
Processing triggers for libc-bin (2.23-0ubuntu9) ...
Processing triggers for man-db (2.7.5-1) ...

    筛选已安装软件包中与nginx有关的

    $ dpkg --get-selections | grep nginx

nginx-common                                    deinstall

    卸载nginx-common不保留配置文件

    $ sudo apt-get --purge remove nginx-common

Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
  nginx-common*
0 upgraded, 0 newly installed, 1 to remove and 205 not upgraded.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
(Reading database ... 66243 files and directories currently installed.)
Removing nginx-common (1.10.3-0ubuntu0.16.04.2) ...
Purging configuration files for nginx-common (1.10.3-0ubuntu0.16.04.2) ...
dpkg: warning: while removing nginx-common, directory '/var/www/html' not empty so not removed

    重新安装nginx

    $ sudo apt-get install nginx
...

    查看版本号，执行nginx配置文件语法检测

    $ nginx -v
nginx version: nginx/1.10.3 (Ubuntu)

$ sudo nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful

    虽然nginx已经重装好了，但是一路下来还有几个困惑：

    1. apt-get autoremove到底是按什么规则卸载软件？
    2. 为什么nginx-common没有在一开始的时候卸载？

    1. apt-get autoremove到底是按什么规则卸载软件？

    apt-get autoremove：删除，自动安装的，且不再需要的
    （不被其他软件当作依赖的）软件包

    举个栗子: 通过apt-get方式安装nginx时，会通过引导自动安装所需的依赖包（nginx-core），而当我们卸载nginx后，
    那些自动安装的依赖包就成为不再需要的软件包（nginx-core），通过apt-get autoremove会自动清理它们

    既然会自动删除不再需要的软件包，那么为什么nginx-common没被删除？

    2. 为什么nginx-common没有在apt-get autoremove的时候卸载？

    不知道细心的童鞋发现没，我们在卸载nginx的时候，
    手动删除了nginx的配置文件夹（sudo rm -rf /etc/nginx）。
    那这些配置文件夹和nginx-common软件包有什么关系呢？

    通过查找ubuntu packages，找到了Ubuntu16.0.4下nginx-common软件包的文件清单。

    按照清单上的目录手动排查，发现本机上除了手动删除的/etc/nginx目录不存在，文件清单内的其他文件都没有被删除，
    猜测可能是nginx-common软件包完整性被破坏，导致autoremove的时候没有被删除，当然这只我的猜测。

    问题回答后续补充:

    整理完全卸载nginx命令时，发现执行如下命令，ngnix的配置文件并没有被删除

    $ sudo apt-get remove --purge nginx

    查阅ubuntu packages发现，nginx依赖nginx-core，nginx-core依赖nginx-common，且其中nginx的配置文件属于nginx-common软件包配置文件的一部分。

    执行如下命令进一步验证

    # 卸载nginx-common ，nginx配置文件不会被删除
$ sudo apt-get remove nginx-common
...
# 卸载nginx-common，nginx配置文件已经被删除（包括但不限于）
$ sudo apt-get remove --purge nginx-common
$ find /etc/nginx/
find: ‘/etc/nginx/’: No such file or directory
    推翻之前的猜测：

    apt-get autoremove执行时，nginx-common软件包已经被选择用于卸载( deinstall )，但是实际还没有卸载。

    $ dpkg --get-selections| grep nginx
nginx-common                                    deinstall

    了解更多关于deinstall，点击这里，如果有知道为什么的同学请不吝赐教。

    命令汇总

    # 完全卸载nginx
$ sudo apt-get remove --purge nginx
$ sudo apt-get autoremove --purge

# 更新nginx，保留配置文件
# 亲测nginx.conf不会被删除和覆盖，但保险起见还是建议先备份
$ sudo apt-get remove nginx
$ sudo apt-get autoremove
$ sudo apt update
$ sudo apt-get install nginx

# 安装软件包
# sudo apt-get install 软件包名称`
# eg: 
$ sudo apt-get install nginx

# 卸载软件包
# sudo apt-get remove 软件包名称
# eg: 
$ sudo apt-get remove nginx

# 卸载软件包且不保留配置文件
# sudo apt-get remove --purge 软件包名称
# eg:
$ sudo apt-get remove --purge nginx

# 卸载自动安装的软件包且不保留配置文件
# sudo apt-get autoremove --purge

# 列出本地软件包列表
# dpkg --get-selections [| grep 筛选关键字]
# eg:（列出本地所有软件包）
$ dpkg --get-selections
# eg:（列出本地与ngnix有关的软件包）
$ dpkg --get-selections | grep nginx

# 查看进程信息
# ps -ef [| grep 筛选关键字]
# eg:（列出所有进程信息）
$ ps -ef
# eg:（列出与nginx有关的进程信息）
$ ps -ef | grep nginx

# 查看端口占用信息
$ sudo netstat -nlp

    本文链接：https://segmentfault.com/a/11...

    转载请注明出处，谢谢

    参考链接汇总

    Package nginx-core not configured yet.Sub-process :/user/bin/dpkg returned an error code(1)

    nginx fail to install on Ubuntu 15.10 server

    Ubuntu 14.04上卸载nginx之后重新安装没有重新生成配置文件的解决方法

    在 xenial 发行版中 all 硬件架构下的 nginx-common 软件包文件清单

    What is difference between the options “autoclean”, “autoremove” and “clean”?

    dpkg --get-selections shows packages marked “deinstall”

    shelllinuxnginxubuntu
    Lsnsh
    86 声望3 粉丝

    聆絮｜吾日三省

    下一篇 »
    微信小程序 - npm支持踩坑

    引用和评论

    被 1 篇内容引用
    推荐阅读
    头像
    搭建一个使用 GitLab CI 的项目

    Lsnsh赞 1阅读 8.2k评论 2

    头像
    一份简单i3wm配置

    notusednow赞 2阅读 27.8k

    头像
    Ubuntu20.04 从源代码编译安装 python3.10

    universe_king赞 2阅读 10.7k评论 1

    头像
    记录一次Linux下安装Oracle数据库的过程

    少放香菜赞 1阅读 3.5k

    头像
    NGINX 知识总结

    Xavier赞 1阅读 4.3k

    头像
    在 ubuntu24.04 上使用英伟达显卡——安装驱动和cuda

    universe_king赞 1阅读 3.9k

    头像
    linux下使用笔记本的相关设置

    notusednow阅读 7.7k

    0 条评论
    得票最新