CentOS7.4，anaconda3，python3.6，tensorflow环境下gdal的编译和问题解决

CentOS7.4，anaconda3，python3.6，tensorflow环境下gdal的编译和问题解决

这是gdal可能会用到的额外的包，按自己需要先提前编译。
这里的话我主要用了proj,Libtiff,Geotiff,Geos,Hdf5这5个包，基本能满足需要

安装步骤

新建一个安装目录：

cd /home/Elam
mkdir gdalsrc
cd gdalsrc

编译额外包：

1.proj

yum install gcc-c++
wget http://download.osgeo.org/proj/proj-4.8.0.tar.gz
tar -zxvf proj-4.8.0.tar.gz 
cd proj-4.8.0
mkdir build
./configure --prefix=/home/Elam/gdalsrc/proj-4.8.0/build
# compile
make -j
# install into build dir
make install

创建一个统一的添加环境变量的文件夹:

cd /home/Elam/gdalsrc
mkdir envsh
cd envsh
vim export_path.sh

添加下面两行代码

export LD_LIBRARY_PATH="/home/Elam/gdalsrc/proj-4.8.0/build/lib:$LD_LIBRARY_PATH"
export PATH="/hoem/Elam/gdalsrc/proj-4.8.0/build/bin:$PATH"

可以source export_path.sh 然后键入proj看看是否编译成功

2.libtiff

yum install gcc-c++ zlib-devel libjpeg-turbo-devel
cd /home/Elam/gdalsrc
wget http://download.osgeo.org/libtiff/tiff-4.0.9.tar.gz  最新版本是4.0.9
tar -zxvf tiff-4.0.9.tar.gz
cd tiff-4.0.9

ls一下发现build文件夹已经存在，因此不需要重新创建直接configure

./configure --prefix=/home/Elam/gdalsrc/tiff-4.0.9/build/ \
            --exec-prefix=/home/Elam/gdalsrc/tiff-4.0.9/build
make -j
make check
# install to build dir
make install
# confirm install
./build/bin/tiffinfo

进入刚才创建的export_path添加新的环境变量，如下图：

source一下

3.Geotiff

在gdalsrc目录下

wget http://download.osgeo.org/geotiff/libgeotiff/libgeotiff-1.4.2.tar.gz
tar -xvfz libgeotiff-1.4.2.tar.gz 
cd libgeotiff-1.4.2/
mkdir build
./configure --prefix=/home/Elam/gdalsrc/libgeotiff-1.4.2/build \
            --with-proj=/home/Elam/gdalsrc/proj-4.8.0/build \
            --with-libtiff=/home/Elam/gdalsrc/tiff-4.0.9/build \
            --with-zlib --with-jpeg
# compile
make -j
# install into build dir
make install

进入export_path添加新的环境变量，如下图：

source一下

4.Geos

yum install gcc-c++ swig python-devel
cd /home/Elam/gdalsrc
wget http://download.osgeo.org/geos/geos-3.6.2.tar.bz2
tar -xvjf geos-3.6.2.tar.bz2 
cd geos-3.6.2
mkdir build
./configure --prefix=/home/Elam/gdalsrc/geos-3.6.2/build --enable-python
# compile    
make -j$threads
make check
# install into build dir
make install
# check install
./build/bin/geos-config --version

gdal编译过程中碰到的问题主要出现在编译这个库中

错误:

./configure --prefix=/home/Elam/gdalsrc/geos-3.6.2/build --enable-python

configure出现cannot find Python library path错误:

解决方法：
vim configure
在左下角输入/cannot find Python library path
回车
找到对应行附近

将libpython$PYTHOH_VERSION改成你自己对应的.so和.a版本（具体版本可以到上面include路径同一路径下lib文件夹中查看）
如上 我改成了libpython3.6m
修改后：wq
重新configure

继续修改configure文件

重新configure
如果后续还报/usr/bin/ld: cannot find -lpython3.6错误
继续修改

重新configure
然后继续

make –j  
make check
make install

添加新的环境变量

source

5.hdf5

yum install gcc-c++ zlib-devel
cd /home/Elam/gdalsrc
wget http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.11.tar.gz
tar xvfz hdf5-1.8.11.tar.gz
cd hdf5-1.8.11
touch release_docs/INSTALL_VMS.txt
mkdir build
CFLAGS=-O0 \
./configure \
  --prefix=/home/Elam/gdalsrc/hdf5-1.10.1/build \
  --enable-shared \
  --enable-build-all \
  --with-zlib \
  --with-pthread \
  --enable-cxx \
# compile
make -j
# test build -- all tests should pass
make -j check
# install into build dir
make install

添加新的环境变量，注意这里还有include文件夹

gdal编译

我从网上下了一个2.3.0版本的，网址：http://download.osgeo.org/gdal/

yum install subversion gcc-c++ sqlite-devel libxml2-devel python-devel numpy swig expat-devel libcurl-devel xerces-c-devel unixODBC-devel postgresql postgresql-devel
cd /home/Elam/gdalsrc
tar -zxvf gdal-2.3.0.tar.gz
cd gdal-2.3.0
mkdir build
./configure \
--prefix=/home/Elam/gdalsrc/gdal-2.3.0/build \
--with-jpeg=external \
--without-libtool \
--with-python=/usr/local/anaconda3/bin/python \
--with-static-proj4=/home/Elam/gdalsrc/proj-4.8.0/build \
--with-libtiff=/home/Elam/gdalsrc/tiff-4.0.9/build \
--with-geotiff=/home/Elam/gdalsrc/libgeotiff-1.4.2/build \
--with-geos=/home/Elam/gdalsrc/geos-3.6.2/build/bin/geos-config \
--with-hdf5=/home/Elam/gdalsrc/hdf5-1.10.1/build \

make -j
# install into build dir
make install

添加新的环境变量：

进入build/bin里面

gdal-config –-version

看看是否编译成功

cd /home/Elam/gdalsrc/gdal-2.3.0/swig
make -j
cd python
python setup.py install --prefix=/home/Elam/gdalsrc/gdal-2.3.0/build

添加环境变量，或者直接用sys的路子添加路径

source
重新新建一个终端
先用

echo $PATH
echo $LD_LIBRARY_PATH

查看各个库的路径是否都在
如果不在，则重新source一下那个export_path.sh 如果不想每次都重新source，就直接添加到系统的环境变量当中去
进入python终端
看看能不能import

binggo！